Message-ID: <3d63835d-cc1f-a6f3-6407-8b7c155a6d65@intel.com>
Date:   Sun, 22 Jan 2023 11:30:44 +0200
From:   "Neftin, Sasha" <sasha.neftin@...el.com>
To:     Jia Liu <liujia6264@...il.com>
CC:     Jacob Keller <jacob.e.keller@...el.com>,
        <jesse.brandeburg@...el.com>, <anthony.l.nguyen@...el.com>,
        <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
        <pabeni@...hat.com>, <netdev@...r.kernel.org>,
        <intel-wired-lan@...ts.osuosl.org>, <linux-kernel@...r.kernel.org>,
        "Ruinskiy, Dima" <dima.ruinskiy@...el.com>,
        "Lifshits, Vitaly" <vitaly.lifshits@...el.com>,
        "Neftin, Sasha" <sasha.neftin@...el.com>
Subject: Re: [Intel-wired-lan] [PATCH] e1000e: Add ADP_I219_LM17 to ME S0ix
 blacklist

On 1/18/2023 11:08, Jia Liu wrote:
> On Wed, Jan 18, 2023 at 1:20 PM Neftin, Sasha <sasha.neftin@...el.com> wrote:
>>
>> On 1/17/2023 21:34, Jacob Keller wrote:
>>>
>>>
>>> On 1/17/2023 2:26 AM, Jiajia Liu wrote:
>>>> I219 on HP EliteOne 840 All in One cannot work after s2idle resume
>>>> when the link speed is Gigabit, Wake-on-LAN is enabled and then set
>>>> the link down before suspend. No issue found when requesting driver
>>>> to configure S0ix. Add workround to let ADP_I219_LM17 use the dirver
>>>> configured S0ix.
>>>>
>>>> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216926
>>>> Signed-off-by: Jiajia Liu <liujia6264@...il.com>
>>>> ---
>>>>
>>>> It's regarding the bug above, it looks it's causued by the ME S0ix.
>>>> And is there a method to make the ME S0ix path work?
>> No. This is a fragile approach. ME must get the message from us
>> (unconfigure the device from s0ix). Otherwise, ME will continue to
>> access LAN resources and the controller could get stuck.
>> I see two ways:
>> 1. you always can skip s0ix flow by priv_flag
>> 2. Especially in this case (HP platform) - please, contact HP (what is
>> the ME version on this system, and how was it released...). HP will open
>> a ticket with Intel. (then we can involve the ME team)
> 
> HP released BIOS including ME firmware on their website HP.com at
> https://support.hp.com/my-en/drivers/selfservice/hp-eliteone-840-23.8-inch-g9-all-in-one-desktop-pc/2101132389.
> There is upgrade interface on the BIOS setup menu which can connect
> HP.com and upgrade to newer BIOS.
> 
> The initial ME version was v16.0.15.1735 from BIOS 02.03.04.
> Then I upgraded to the latest one v16.1.25.1932v3 from BIOS 02.06.01
> released on Nov 28, 2022. Both of them can produce this issue.
> 
> I have only one setup. Is it possible to try on your system which has the
> same I219-LM to see if it's platform specific or not?
Yes, s0ix flows works on our platforms.
> 
>>>>
>>>
>>> No idea. It does seem better to disable S0ix if it doesn't work properly
>>> first though...
>>>
>>>>    drivers/net/ethernet/intel/e1000e/netdev.c | 25 ++++++++++++++++++++++
>>>>    1 file changed, 25 insertions(+)
>>>>
>>>> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
>>>> index 04acd1a992fa..7ee759dbd09d 100644
>>>> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
>>>> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
>>>> @@ -6330,6 +6330,23 @@ static void e1000e_flush_lpic(struct pci_dev *pdev)
>>>>       pm_runtime_put_sync(netdev->dev.parent);
>>>>    }
>>>>
>>>> +static u16 me_s0ix_blacklist[] = {
>>>> +    E1000_DEV_ID_PCH_ADP_I219_LM17,
>>>> +    0
>>>> +};
>>>> +
>>>> +static bool e1000e_check_me_s0ix_blacklist(const struct e1000_adapter *adapter)
>>>> +{
>>>> +    u16 *list;
>>>> +
>>>> +    for (list = me_s0ix_blacklist; *list; list++) {
>>>> +            if (*list == adapter->pdev->device)
>>>> +                    return true;
>>>> +    }
>>>> +
>>>> +    return false;
>>>> +}
>>>
>>> The name of this function seems odd..? "check_me"? It also seems like we
>>> could just do a simple switch/case on the device ID or similar.
>>>
>>> Maybe: "e1000e_device_supports_s0ix"?
>>>
>>>> +
>>>>    /* S0ix implementation */
>>>>    static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
>>>>    {
>>>> @@ -6337,6 +6354,9 @@ static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
>>>>       u32 mac_data;
>>>>       u16 phy_data;
>>>>
>>>> +    if (e1000e_check_me_s0ix_blacklist(adapter))
>>>> +            goto req_driver;
>>>> +
>>>>       if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
>>>>           hw->mac.type >= e1000_pch_adp) {
>>>>               /* Request ME configure the device for S0ix */
>>>
>>>
>>> The related code also seems to already perform some set of mac checks
>>> here...
>>>
>>>> @@ -6346,6 +6366,7 @@ static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
>>>>               trace_e1000e_trace_mac_register(mac_data);
>>>>               ew32(H2ME, mac_data);
>>>>       } else {
>>>> +req_driver:>                /* Request driver configure the device to S0ix */
>>>>               /* Disable the periodic inband message,
>>>>                * don't request PCIe clock in K1 page770_17[10:9] = 10b
>>>> @@ -6488,6 +6509,9 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
>>>>       u16 phy_data;
>>>>       u32 i = 0;
>>>>
>>>> +    if (e1000e_check_me_s0ix_blacklist(adapter))
>>>> +            goto req_driver;
>>>> +
>>>
>>> Why not just combine this check into the statement below rather than
>>> adding a goto?
>>>
>>>>       if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
>>>>           hw->mac.type >= e1000_pch_adp) {
>>>>               /* Keep the GPT clock enabled for CSME */
>>>> @@ -6523,6 +6547,7 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
>>>>               else
>>>>                       e_dbg("DPG_EXIT_DONE cleared after %d msec\n", i * 10);
>>>>       } else {
>>>> +req_driver:
>>>>               /* Request driver unconfigure the device from S0ix */
>>>>
>>>>               /* Disable the Dynamic Power Gating in the MAC */
>>> _______________________________________________
>>> Intel-wired-lan mailing list
>>> Intel-wired-lan@...osl.org
>>> https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
>>

Powered by blists - more mailing lists