| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1674498274-6010-13-git-send-email-quic_khsieh@quicinc.com>
Date: Mon, 23 Jan 2023 10:24:32 -0800
From: Kuogee Hsieh <quic_khsieh@...cinc.com>
To: <dri-devel@...ts.freedesktop.org>, <robdclark@...il.com>,
<sean@...rly.run>, <swboyd@...omium.org>, <dianders@...omium.org>,
<vkoul@...nel.org>, <daniel@...ll.ch>, <airlied@...il.com>,
<agross@...nel.org>, <dmitry.baryshkov@...aro.org>,
<andersson@...nel.org>
CC: Kuogee Hsieh <quic_khsieh@...cinc.com>,
<quic_abhinavk@...cinc.com>, <quic_sbillaka@...cinc.com>,
<freedreno@...ts.freedesktop.org>, <linux-arm-msm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v1 12/14] drm/msm/disp/dpu1: revise timing engine programming to work for DSC
Current implementation timing engine programming does not consider
compression factors. This patch add consideration of DSC factors
while programming timing engine.
Signed-off-by: Kuogee Hsieh <quic_khsieh@...cinc.com>
---
.../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 14 ++-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 132 +++++++++++++--------
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h | 10 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h | 6 +-
5 files changed, 110 insertions(+), 54 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index 2d864f9..3330e185 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -279,6 +279,8 @@ static void dpu_encoder_phys_vid_setup_timing_engine(
if (phys_enc->hw_pp->merge_3d)
intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
+ phys_enc->hw_intf->hw_rev = phys_enc->dpu_kms->core_rev;
+
spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags);
phys_enc->hw_intf->ops.setup_timing_gen(phys_enc->hw_intf,
&timing_params, fmt);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 7b0b092..c6ee789 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -43,16 +43,22 @@
#define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
#define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */
-#define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
+#define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250, kona */
#define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
#define DPU_HW_VER_630 DPU_HW_VER(6, 3, 0) /* sm6115|sm4250 */
#define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
-#define DPU_HW_VER_700 DPU_HW_VER(7, 0, 0) /* sm8350 */
+#define DPU_HW_VER_700 DPU_HW_VER(7, 0, 0) /* sm8350, lahaina */
#define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
-#define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */
+#define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450, waipio */
#define DPU_HW_VER_900 DPU_HW_VER(9, 0, 0) /* sm8550 */
+/* Avoid using below IS_XXX macros outside catalog, use feature bit instead */
+#define IS_DPU_MAJOR_SAME(rev1, rev2) \
+ (DPU_HW_MAJOR((rev1)) == DPU_HW_MAJOR((rev2)))
+#define IS_DPU_MAJOR_MINOR_SAME(rev1, rev2) \
+ (DPU_HW_MAJOR_MINOR((rev1)) == DPU_HW_MAJOR_MINOR((rev2)))
+
#define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
#define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300)
#define IS_SDM845_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_400)
@@ -240,6 +246,7 @@ enum {
* @DPU_INTF_INPUT_CTRL Supports the setting of pp block from which
* pixel data arrives to this INTF
* @DPU_INTF_TE INTF block has TE configuration support
+ * @DPU_INTF_TE_ALIGN_VSYNC INTF block has POMS Align vsync support
* @DPU_DATA_HCTL_EN Allows data to be transferred at different rate
than video timing
* @DPU_INTF_MAX
@@ -247,6 +254,7 @@ enum {
enum {
DPU_INTF_INPUT_CTRL = 0x1,
DPU_INTF_TE,
+ DPU_INTF_TE_ALIGN_VSYNC,
DPU_DATA_HCTL_EN,
DPU_INTF_MAX
};
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 7ce66bf..238efdb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
*/
@@ -44,6 +44,7 @@
#define INTF_DEFLICKER_STRNG_COEFF 0x0F4
#define INTF_DEFLICKER_WEAK_COEFF 0x0F8
+#define INTF_REG_SPLIT_LINK 0x080
#define INTF_DSI_CMD_MODE_TRIGGER_EN 0x084
#define INTF_PANEL_FORMAT 0x090
#define INTF_TPG_ENABLE 0x100
@@ -65,9 +66,9 @@
#define INTF_CFG_ACTIVE_H_EN BIT(29)
#define INTF_CFG_ACTIVE_V_EN BIT(30)
-
#define INTF_CFG2_DATABUS_WIDEN BIT(0)
#define INTF_CFG2_DATA_HCTL_EN BIT(4)
+#define INTF_CFG2_ALIGN_VSYNC_TO_TE BIT(16)
#define INTF_MISR_CTRL 0x180
#define INTF_MISR_SIGNATURE 0x184
@@ -91,6 +92,16 @@ static const struct dpu_intf_cfg *_intf_offset(enum dpu_intf intf,
return ERR_PTR(-EINVAL);
}
+static inline void _check_and_set_comp_bit(struct dpu_hw_intf *ctx,
+ bool dsc_4hs_merge, bool compression_en, u32 *intf_cfg2)
+{
+ if (((DPU_HW_MAJOR(ctx->hw_rev) >= DPU_HW_MAJOR(DPU_HW_VER_700)) && compression_en)
+ || (IS_DPU_MAJOR_SAME(ctx->hw_rev, DPU_HW_VER_600) && dsc_4hs_merge))
+ (*intf_cfg2) |= BIT(12);
+ else if (!compression_en)
+ (*intf_cfg2) &= ~BIT(12);
+}
+
static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
const struct intf_timing_params *p,
const struct dpu_format *fmt)
@@ -113,82 +124,96 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
/* read interface_cfg */
intf_cfg = DPU_REG_READ(c, INTF_CONFIG);
- if (ctx->cap->type == INTF_DP)
+ if (ctx->cap->type == INTF_EDP || ctx->cap->type == INTF_DP)
dp_intf = true;
hsync_period = p->hsync_pulse_width + p->h_back_porch + p->width +
- p->h_front_porch;
+ p->h_front_porch;
vsync_period = p->vsync_pulse_width + p->v_back_porch + p->height +
- p->v_front_porch;
+ p->v_front_porch;
display_v_start = ((p->vsync_pulse_width + p->v_back_porch) *
- hsync_period) + p->hsync_skew;
+ hsync_period) + p->hsync_skew;
display_v_end = ((vsync_period - p->v_front_porch) * hsync_period) +
- p->hsync_skew - 1;
+ p->hsync_skew - 1;
+
+ hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
hsync_start_x = p->h_back_porch + p->hsync_pulse_width;
hsync_end_x = hsync_period - p->h_front_porch - 1;
- if (p->width != p->xres) { /* border fill added */
- active_h_start = hsync_start_x;
- active_h_end = active_h_start + p->xres - 1;
- } else {
- active_h_start = 0;
- active_h_end = 0;
- }
-
- if (p->height != p->yres) { /* border fill added */
- active_v_start = display_v_start;
- active_v_end = active_v_start + (p->yres * hsync_period) - 1;
- } else {
- active_v_start = 0;
- active_v_end = 0;
- }
-
- if (active_h_end) {
- active_hctl = (active_h_end << 16) | active_h_start;
- intf_cfg |= INTF_CFG_ACTIVE_H_EN;
- } else {
- active_hctl = 0;
- }
-
- if (active_v_end)
- intf_cfg |= INTF_CFG_ACTIVE_V_EN;
-
- hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
- display_hctl = (hsync_end_x << 16) | hsync_start_x;
-
/*
* DATA_HCTL_EN controls data timing which can be different from
* video timing. It is recommended to enable it for all cases, except
* if compression is enabled in 1 pixel per clock mode
*/
+ if (!p->compression_en || p->wide_bus_en)
+ intf_cfg2 |= INTF_CFG2_DATA_HCTL_EN;
+
if (p->wide_bus_en)
- intf_cfg2 |= INTF_CFG2_DATABUS_WIDEN | INTF_CFG2_DATA_HCTL_EN;
+ intf_cfg2 |= INTF_CFG2_DATABUS_WIDEN;
+ /*
+ * If widebus is disabled:
+ * For uncompressed stream, the data is valid for the entire active
+ * window period.
+ * For compressed stream, data is valid for a shorter time period
+ * inside the active window depending on the compression ratio.
+ *
+ * If widebus is enabled:
+ * For uncompressed stream, data is valid for only half the active
+ * window, since the data rate is doubled in this mode.
+ * p->width holds the adjusted width for DP but unadjusted width for DSI
+ * For compressed stream, data validity window needs to be adjusted for
+ * compression ratio and then further halved.
+ */
data_width = p->width;
+ if (p->compression_en) {
+ if (p->wide_bus_en)
+ data_width = DIV_ROUND_UP(p->dce_bytes_per_line, 6);
+ else
+ data_width = DIV_ROUND_UP(p->dce_bytes_per_line, 3);
+ } else if (!dp_intf && p->wide_bus_en) {
+ data_width = p->width >> 1;
+ } else {
+ data_width = p->width;
+ }
+
hsync_data_start_x = hsync_start_x;
hsync_data_end_x = hsync_start_x + data_width - 1;
+ display_hctl = (hsync_end_x << 16) | hsync_start_x;
display_data_hctl = (hsync_data_end_x << 16) | hsync_data_start_x;
if (dp_intf) {
/* DP timing adjustment */
display_v_start += p->hsync_pulse_width + p->h_back_porch;
display_v_end -= p->h_front_porch;
+ }
+
+ intf_cfg |= INTF_CFG_ACTIVE_H_EN;
+ intf_cfg |= INTF_CFG_ACTIVE_V_EN;
+ active_h_start = hsync_start_x;
+ active_h_end = active_h_start + p->xres - 1;
+ active_v_start = display_v_start;
+ active_v_end = active_v_start + (p->yres * hsync_period) - 1;
- active_h_start = hsync_start_x;
- active_h_end = active_h_start + p->xres - 1;
- active_v_start = display_v_start;
- active_v_end = active_v_start + (p->yres * hsync_period) - 1;
+ active_hctl = (active_h_end << 16) | active_h_start;
- active_hctl = (active_h_end << 16) | active_h_start;
+ if (dp_intf) {
display_hctl = active_hctl;
- intf_cfg |= INTF_CFG_ACTIVE_H_EN | INTF_CFG_ACTIVE_V_EN;
+ if (p->compression_en) {
+ active_data_hctl = (hsync_start_x + p->extra_dto_cycles) << 16;
+ active_data_hctl += hsync_start_x;
+
+ display_data_hctl = active_data_hctl;
+ }
}
+ _check_and_set_comp_bit(ctx, p->dsc_4hs_merge, p->compression_en, &intf_cfg2);
+
den_polarity = 0;
if (ctx->cap->type == INTF_HDMI) {
hsync_polarity = p->yres >= 720 ? 0 : 1;
@@ -202,7 +227,7 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
}
polarity_ctl = (den_polarity << 2) | /* DEN Polarity */
(vsync_polarity << 1) | /* VSYNC Polarity */
- (hsync_polarity << 0); /* HSYNC Polarity */
+ (hsync_polarity << 0); /* HSYNC Polarity */
if (!DPU_FORMAT_IS_YUV(fmt))
panel_format = (fmt->bits[C0_G_Y] |
@@ -216,6 +241,17 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
(COLOR_8BIT << 4) |
(0x21 << 8));
+ if (p->wide_bus_en)
+ intf_cfg2 |= INTF_CFG2_DATABUS_WIDEN;
+
+ /* Synchronize timing engine enable to TE */
+ if ((ctx->cap->features & BIT(DPU_INTF_TE_ALIGN_VSYNC))
+ && p->poms_align_vsync)
+ intf_cfg2 |= INTF_CFG2_ALIGN_VSYNC_TO_TE;
+
+ if (ctx->cfg.split_link_en)
+ DPU_REG_WRITE(c, INTF_REG_SPLIT_LINK, 0x3);
+
DPU_REG_WRITE(c, INTF_HSYNC_CTL, hsync_ctl);
DPU_REG_WRITE(c, INTF_VSYNC_PERIOD_F0, vsync_period * hsync_period);
DPU_REG_WRITE(c, INTF_VSYNC_PULSE_WIDTH_F0,
@@ -233,11 +269,9 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
DPU_REG_WRITE(c, INTF_FRAME_LINE_COUNT_EN, 0x3);
DPU_REG_WRITE(c, INTF_CONFIG, intf_cfg);
DPU_REG_WRITE(c, INTF_PANEL_FORMAT, panel_format);
- if (ctx->cap->features & BIT(DPU_DATA_HCTL_EN)) {
- DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
- DPU_REG_WRITE(c, INTF_DISPLAY_DATA_HCTL, display_data_hctl);
- DPU_REG_WRITE(c, INTF_ACTIVE_DATA_HCTL, active_data_hctl);
- }
+ DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
+ DPU_REG_WRITE(c, INTF_DISPLAY_DATA_HCTL, display_data_hctl);
+ DPU_REG_WRITE(c, INTF_ACTIVE_DATA_HCTL, active_data_hctl);
}
static void dpu_hw_intf_enable_timing_engine(
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
index 643dd10..57be86d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
*/
@@ -10,6 +10,7 @@
#include "dpu_hw_catalog.h"
#include "dpu_hw_mdss.h"
#include "dpu_hw_util.h"
+#include "dpu_hw_top.h"
struct dpu_hw_intf;
@@ -33,6 +34,11 @@ struct intf_timing_params {
u32 hsync_skew;
bool wide_bus_en;
+ bool compression_en;
+ u32 extra_dto_cycles; /* for DP only */
+ bool dsc_4hs_merge; /* DSC 4HS merge */
+ bool poms_align_vsync; /* poms with vsync aligned */
+ u32 dce_bytes_per_line;
};
struct intf_prog_fetch {
@@ -86,11 +92,13 @@ struct dpu_hw_intf_ops {
struct dpu_hw_intf {
struct dpu_hw_blk_reg_map hw;
+ u32 hw_rev; /* mdss hw_rev */
/* intf */
enum dpu_intf idx;
const struct dpu_intf_cfg *cap;
const struct dpu_mdss_cfg *mdss;
+ struct split_pipe_cfg cfg;
/* ops */
struct dpu_hw_intf_ops ops;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
index a1a9e44..1212fa2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
@@ -1,5 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef _DPU_HW_TOP_H
@@ -34,12 +36,14 @@ struct traffic_shaper_cfg {
* @intf : Interface id for main control path
* @split_flush_en: Allows both the paths to be flushed when master path is
* flushed
+ * @split_link_en: Check if split link is enabled
*/
struct split_pipe_cfg {
bool en;
enum dpu_intf_mode mode;
enum dpu_intf intf;
bool split_flush_en;
+ bool split_link_en;
};
/**
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists