| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221117-b4-amlogic-bindings-convert-v3-7-e28dd31e3bed@linaro.org>
Date: Mon, 23 Jan 2023 11:10:04 +0100
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Ulf Hansson <ulf.hansson@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-watchdog@...r.kernel.org, linux-media@...r.kernel.org,
linux-mmc@...r.kernel.org, linux-pci@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v3 7/7] dt-bindings: PCI: convert amlogic,meson-pcie.txt to
dt-schema
Convert the Amlogic Meson AXG DWC PCIe SoC controller bindings to
dt-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
.../devicetree/bindings/pci/amlogic,axg-pcie.yaml | 134 +++++++++++++++++++++
.../devicetree/bindings/pci/amlogic,meson-pcie.txt | 70 -----------
2 files changed, 134 insertions(+), 70 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
new file mode 100644
index 000000000000..a5bd90bc0712
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/amlogic,axg-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson AXG DWC PCIe SoC controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@...aro.org>
+
+description:
+ Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+ properties:
+ compatible:
+ enum:
+ - amlogic,axg-pcie
+ - amlogic,g12a-pcie
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - amlogic,axg-pcie
+ - amlogic,g12a-pcie
+ - const: snps,dw-pcie
+
+ reg:
+ items:
+ - description: External local bus interface registers
+ - description: Meson designed configuration registers
+ - description: PCIe configuration space
+
+ reg-names:
+ items:
+ - const: elbi
+ - const: cfg
+ - const: config
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: PCIe GEN 100M PLL clock
+ - description: PCIe RC clock gate
+ - description: PCIe PHY clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: port
+ - const: general
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie
+
+ resets:
+ items:
+ - description: Port Reset
+ - description: Shared APB reset
+
+ reset-names:
+ items:
+ - const: port
+ - const: apb
+
+ num-lanes:
+ const: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clock
+ - clock-names
+ - "#address-cells"
+ - "#size-cells"
+ - "#interrupt-cells"
+ - interrupt-map
+ - interrupt-map-mask
+ - ranges
+ - bus-range
+ - device_type
+ - num-lanes
+ - phys
+ - phy-names
+ - resets
+ - reset-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pcie: pcie@...00000 {
+ compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+ reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
+ reg-names = "elbi", "cfg", "config";
+ interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&pclk>, <&clk_port>, <&clk_phy>;
+ clock-names = "pclk", "port", "general";
+ resets = <&reset_pcie_port>, <&reset_pcie_apb>;
+ reset-names = "port", "apb";
+ phys = <&pcie_phy>;
+ phy-names = "pcie";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+ bus-range = <0x0 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <1>;
+ ranges = <0x82000000 0 0 0xf9c00000 0 0x00300000>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
deleted file mode 100644
index c3a75ac6e59d..000000000000
--- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-Amlogic Meson AXG DWC PCIE SoC controller
-
-Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and
-inherits common properties defined in
-Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
-
-Additional properties are described here:
-
-Required properties:
-- compatible:
- should contain :
- - "amlogic,axg-pcie" for AXG SoC Family
- - "amlogic,g12a-pcie" for G12A SoC Family
- to identify the core.
-- reg:
- should contain the configuration address space.
-- reg-names: Must be
- - "elbi" External local bus interface registers
- - "cfg" Meson specific registers
- - "config" PCIe configuration space
-- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Must include the following entries:
- - "pclk" PCIe GEN 100M PLL clock
- - "port" PCIe_x(A or B) RC clock gate
- - "general" PCIe Phy clock
-- resets: phandle to the reset lines.
-- reset-names: must contain "port" and "apb"
- - "port" Port A or B reset
- - "apb" Share APB reset
-- phys: should contain a phandle to the PCIE phy
-- phy-names: must contain "pcie"
-
-- device_type:
- should be "pci". As specified in snps,dw-pcie.yaml
-
-
-Example configuration:
-
- pcie: pcie@...00000 {
- compatible = "amlogic,axg-pcie", "snps,dw-pcie";
- reg = <0x0 0xf9800000 0x0 0x400000
- 0x0 0xff646000 0x0 0x2000
- 0x0 0xf9f00000 0x0 0x100000>;
- reg-names = "elbi", "cfg", "config";
- reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
- interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
- bus-range = <0x0 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>;
-
- clocks = <&clkc CLKID_USB
- &clkc CLKID_PCIE_A
- &clkc CLKID_PCIE_CML_EN0>;
- clock-names = "general",
- "pclk",
- "port";
- resets = <&reset RESET_PCIE_A>,
- <&reset RESET_PCIE_APB>;
- reset-names = "port",
- "apb";
- phys = <&pcie_phy>;
- phy-names = "pcie";
- };
--
2.34.1
Powered by blists - more mailing lists