| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Y86nfvtV4AacstMZ@google.com>
Date: Mon, 23 Jan 2023 15:27:58 +0000
From: Lee Jones <lee@...nel.org>
To: Sebastian Reichel <sebastian.reichel@...labora.com>
Cc: Heiko Stuebner <heiko@...ech.de>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, kernel@...labora.com
Subject: Re: [PATCHv5 07/10] mfd: rk8xx: add rk806 support
On Mon, 23 Jan 2023, Sebastian Reichel wrote:
> Hi,
>
> On Fri, Jan 20, 2023 at 04:59:21PM +0000, Lee Jones wrote:
> > On Mon, 09 Jan 2023, Sebastian Reichel wrote:
> >
> > > Add support for SPI connected rk806, which is used by the RK3588
> > > evaluation boards. The PMIC is advertised to support I2C and SPI,
> > > but the evaluation boards all use SPI. Thus only SPI support is
> > > added here.
> > >
> > > Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
> > > ---
> > > drivers/mfd/Kconfig | 14 ++
> > > drivers/mfd/Makefile | 1 +
> > > drivers/mfd/rk8xx-core.c | 67 ++++++-
> > > drivers/mfd/rk8xx-spi.c | 122 ++++++++++++
> > > include/linux/mfd/rk808.h | 409 ++++++++++++++++++++++++++++++++++++++
> > > 5 files changed, 611 insertions(+), 2 deletions(-)
> > > create mode 100644 drivers/mfd/rk8xx-spi.c
> > >
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index 692e38283bda..13582ea5cb44 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -1222,6 +1222,20 @@ config MFD_RK8XX_I2C
> > > through I2C interface. The device supports multiple sub-devices
> > > including interrupts, RTC, LDO & DCDC regulators, and onkey.
> > >
> > > +config MFD_RK8XX_SPI
> > > + tristate "Rockchip RK806 Power Management Chip"
> > > + depends on SPI && OF
> > > + select MFD_CORE
> > > + select REGMAP_SPI
> > > + select REGMAP_IRQ
> > > + select MFD_RK8XX
> > > + help
> > > + If you say yes here you get support for the RK806 Power Management
> > > + chip.
> > > + This driver provides common support for accessing the device
> > > + through an SPI interface. The device supports multiple sub-devices
> > > + including interrupts, LDO & DCDC regulators, and power on-key.
> > > +
> > > config MFD_RN5T618
> > > tristate "Ricoh RN5T567/618 PMIC"
> > > depends on I2C
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > > index f65ef1bd0810..a88f27cd837b 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -222,6 +222,7 @@ obj-$(CONFIG_MFD_NTXEC) += ntxec.o
> > > obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
> > > obj-$(CONFIG_MFD_RK8XX) += rk8xx-core.o
> > > obj-$(CONFIG_MFD_RK8XX_I2C) += rk8xx-i2c.o
> > > +obj-$(CONFIG_MFD_RK8XX_SPI) += rk8xx-spi.o
> > > obj-$(CONFIG_MFD_RN5T618) += rn5t618.o
> > > obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
> > > obj-$(CONFIG_MFD_SYSCON) += syscon.o
> > > diff --git a/drivers/mfd/rk8xx-core.c b/drivers/mfd/rk8xx-core.c
> > > index c52f5fa1a4da..289f4c1f30c2 100644
> > > --- a/drivers/mfd/rk8xx-core.c
> > > +++ b/drivers/mfd/rk8xx-core.c
> > > @@ -37,6 +37,11 @@ static const struct resource rk805_key_resources[] = {
> > > DEFINE_RES_IRQ(RK805_IRQ_PWRON_FALL),
> > > };
> > >
> > > +static struct resource rk806_pwrkey_resources[] = {
> > > + DEFINE_RES_IRQ(RK806_IRQ_PWRON_FALL),
> > > + DEFINE_RES_IRQ(RK806_IRQ_PWRON_RISE),
> > > +};
> > > +
> > > static const struct resource rk817_pwrkey_resources[] = {
> > > DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE),
> > > DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL),
> > > @@ -64,6 +69,16 @@ static const struct mfd_cell rk805s[] = {
> > > },
> > > };
> > >
> > > +static const struct mfd_cell rk806s[] = {
> > > + { .name = "rk805-pinctrl", },
> > > + { .name = "rk808-regulator", },
> > > + {
> > > + .name = "rk805-pwrkey",
> > > + .num_resources = ARRAY_SIZE(rk806_pwrkey_resources),
> > > + .resources = &rk806_pwrkey_resources[0],
> >
> > My OCD-sense is tingling.
> >
> > Could you please add the resources *before* the num_resources please?
> >
> > Also: '.resources = rk806_pwrkey_resources' is fine
>
> Ack.
>
> >
> > > + },
> > > +};
> > > +
> > > static const struct mfd_cell rk808s[] = {
> > > { .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, },
> > > { .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, },
> > > @@ -122,6 +137,12 @@ static const struct rk808_reg_data rk805_pre_init_reg[] = {
> > > {RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
> > > };
> > >
> > > +static const struct rk808_reg_data rk806_pre_init_reg[] = {
> > > + { RK806_GPIO_INT_CONFIG, RK806_INT_POL_MSK, RK806_INT_POL_L },
> > > + { RK806_SYS_CFG3, RK806_SLAVE_RESTART_FUN_MSK, RK806_SLAVE_RESTART_FUN_EN },
> > > + { RK806_SYS_OPTION, RK806_SYS_ENB2_2M_MSK, RK806_SYS_ENB2_2M_EN },
> > > +};
> > > +
> > > static const struct rk808_reg_data rk808_pre_init_reg[] = {
> > > { RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
> > > { RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
> > > @@ -272,6 +293,27 @@ static const struct regmap_irq rk805_irqs[] = {
> > > },
> > > };
> > >
> > > +static const struct regmap_irq rk806_irqs[] = {
> > > + /* INT_STS0 IRQs */
> > > + REGMAP_IRQ_REG(RK806_IRQ_PWRON_FALL, 0, RK806_INT_STS_PWRON_FALL),
> > > + REGMAP_IRQ_REG(RK806_IRQ_PWRON_RISE, 0, RK806_INT_STS_PWRON_RISE),
> > > + REGMAP_IRQ_REG(RK806_IRQ_PWRON, 0, RK806_INT_STS_PWRON),
> > > + REGMAP_IRQ_REG(RK806_IRQ_PWRON_LP, 0, RK806_INT_STS_PWRON_LP),
> > > + REGMAP_IRQ_REG(RK806_IRQ_HOTDIE, 0, RK806_INT_STS_HOTDIE),
> > > + REGMAP_IRQ_REG(RK806_IRQ_VDC_RISE, 0, RK806_INT_STS_VDC_RISE),
> > > + REGMAP_IRQ_REG(RK806_IRQ_VDC_FALL, 0, RK806_INT_STS_VDC_FALL),
> > > + REGMAP_IRQ_REG(RK806_IRQ_VB_LO, 0, RK806_INT_STS_VB_LO),
> > > + /* INT_STS1 IRQs */
> > > + REGMAP_IRQ_REG(RK806_IRQ_REV0, 1, RK806_INT_STS_REV0),
> > > + REGMAP_IRQ_REG(RK806_IRQ_REV1, 1, RK806_INT_STS_REV1),
> > > + REGMAP_IRQ_REG(RK806_IRQ_REV2, 1, RK806_INT_STS_REV2),
> > > + REGMAP_IRQ_REG(RK806_IRQ_CRC_ERROR, 1, RK806_INT_STS_CRC_ERROR),
> > > + REGMAP_IRQ_REG(RK806_IRQ_SLP3_GPIO, 1, RK806_INT_STS_SLP3_GPIO),
> > > + REGMAP_IRQ_REG(RK806_IRQ_SLP2_GPIO, 1, RK806_INT_STS_SLP2_GPIO),
> > > + REGMAP_IRQ_REG(RK806_IRQ_SLP1_GPIO, 1, RK806_INT_STS_SLP1_GPIO),
> > > + REGMAP_IRQ_REG(RK806_IRQ_WDT, 1, RK806_INT_STS_WDT),
> > > +};
> > > +
> > > static const struct regmap_irq rk808_irqs[] = {
> > > /* INT_STS */
> > > [RK808_IRQ_VOUT_LO] = {
> > > @@ -422,6 +464,18 @@ static struct regmap_irq_chip rk805_irq_chip = {
> > > .init_ack_masked = true,
> > > };
> > >
> > > +static struct regmap_irq_chip rk806_irq_chip = {
> > > + .name = "rk806",
> > > + .irqs = rk806_irqs,
> > > + .num_irqs = ARRAY_SIZE(rk806_irqs),
> > > + .num_regs = 2,
> > > + .irq_reg_stride = 2,
> > > + .mask_base = RK806_INT_MSK0,
> > > + .status_base = RK806_INT_STS0,
> > > + .ack_base = RK806_INT_STS0,
> > > + .init_ack_masked = true,
> > > +};
> > > +
> > > static const struct regmap_irq_chip rk808_irq_chip = {
> > > .name = "rk808",
> > > .irqs = rk808_irqs,
> > > @@ -548,6 +602,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
> > > struct rk808 *rk808;
> > > const struct rk808_reg_data *pre_init_reg;
> > > const struct mfd_cell *cells;
> > > + bool dual_support = false;
> > > int nr_pre_init_regs;
> > > int nr_cells;
> > > int ret;
> > > @@ -569,6 +624,14 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
> > > cells = rk805s;
> > > nr_cells = ARRAY_SIZE(rk805s);
> > > break;
> > > + case RK806_ID:
> > > + rk808->regmap_irq_chip = &rk806_irq_chip;
> > > + pre_init_reg = rk806_pre_init_reg;
> > > + nr_pre_init_regs = ARRAY_SIZE(rk806_pre_init_reg);
> > > + cells = rk806s;
> > > + nr_cells = ARRAY_SIZE(rk806s);
> > > + dual_support = true;
> > > + break;
> > > case RK808_ID:
> > > rk808->regmap_irq_chip = &rk808_irq_chip;
> > > pre_init_reg = rk808_pre_init_reg;
> > > @@ -602,7 +665,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
> > > return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n");
> > >
> > > ret = devm_regmap_add_irq_chip(dev, rk808->regmap, irq,
> > > - IRQF_ONESHOT, -1,
> > > + IRQF_ONESHOT | (dual_support ? IRQF_SHARED : 0), -1,
> >
> > Why not 'dual_support = IRQF_SHARED', then | it regardless?
>
> Ack
>
> >
> > > rk808->regmap_irq_chip, &rk808->irq_data);
> > > if (ret)
> > > return dev_err_probe(dev, ret, "Failed to add irq_chip\n");
> > > @@ -617,7 +680,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
> > > pre_init_reg[i].addr);
> > > }
> > >
> > > - ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> > > + ret = devm_mfd_add_devices(dev, dual_support ? PLATFORM_DEVID_AUTO : PLATFORM_DEVID_NONE,
> >
> > Any reason why you can't use AUTO all the time?
>
> That would change device names (and thus sysfs paths) for already
> supported devices. DEVID_AUTO appends a ".<number>" suffix compared
> to DEVID_NONE.
How about using cell->id instead of doing this little dance?
--
Lee Jones [李琼斯]
Powered by blists - more mailing lists