linux-kernel - Re: [PATCH v2 2/4] arm64: dts: qcom: sm8350: drop incorrect cells from serial

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3d85bc42-22bf-ec40-12f9-0d684af1a68b@linaro.org>
Date:   Mon, 23 Jan 2023 17:29:05 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Vinod Koul <vkoul@...nel.org>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/4] arm64: dts: qcom: sm8350: drop incorrect cells
 from serial



On 23.01.2023 13:56, Krzysztof Kozlowski wrote:
> The serial/UART device node does not have children with unit addresses,
> so adderss/size cells are not correct.
> 
> Fixes: cf03cd7e12bd ("arm64: dts: qcom: sm8350: Set up WRAP0 QUPs")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> 
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
> 
> Changes since v1:
> 1. None
> ---
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 4efe79985186..018f26f729f1 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1031,8 +1031,6 @@ uart2: serial@...000 {
>  				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>  				power-domains = <&rpmhpd SM8350_CX>;
>  				operating-points-v2 = <&qup_opp_table_100mhz>;
> -				#address-cells = <1>;
> -				#size-cells = <0>;
>  				status = "disabled";
>  			};
>