[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <e6bba62a-d4c2-50d8-f818-007b6b3e2ca8@ti.com>
Date: Wed, 25 Jan 2023 11:41:11 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: Jan Kiszka <jan.kiszka@...mens.com>, Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Bao Cheng Su <baocheng.su@...mens.com>,
Chao Zeng <chao.zeng@...mens.com>, <s-vadapalli@...com>
Subject: Re: [PATCH v2 3/3] arm64: dts: ti: iot2050: Add support for M.2
variant
On 19/01/23 12:10, Jan Kiszka wrote:
> From: chao zeng <chao.zeng@...mens.com>
>
> The M.2 variant comes with 2 slots, one B-keyed and another one E-keyed.
> They are configured by the firmware during startup. Also the device tree
> will be adjusted according to the detect or manually configured
> interface mode by the firmware. The kernel only carries a single
> configuration as base device tree. It has to be built with a symbols
> node so that the firmware can apply overlays for the connector modes.
>
> Signed-off-by: chao zeng <chao.zeng@...mens.com>
> [Jan: refactored to a single DT]
> Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
> ---
> arch/arm64/boot/dts/ti/Makefile | 3 +
> .../dts/ti/k3-am6548-iot2050-advanced-m2.dts | 121 ++++++++++++++++++
> 2 files changed, 124 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
Reviewed-by: Siddharth Vadapalli <s-vadapalli@...com>
Regards,
Siddharth.
Powered by blists - more mailing lists