[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230125064030.1222121-3-victor.liu@nxp.com>
Date: Wed, 25 Jan 2023 14:40:26 +0800
From: Liu Ying <victor.liu@....com>
To: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: marex@...x.de, stefan@...er.ch, airlied@...il.com, daniel@...ll.ch,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, linux-imx@....com,
krzysztof.kozlowski@...aro.org, LW@...O-electronics.de,
alexander.stein@...tq-group.com
Subject: [PATCH v2 2/6] drm: lcdif: Drop unnecessary NULL pointer check on lcdif->bridge
A valid bridge is already found in lcdif_attach_bridge() and set
to lcdif->bridge, so lcdif->bridge cannot be a NULL pointer. Drop
the unnecessary NULL pointer check in KMS stage.
Signed-off-by: Liu Ying <victor.liu@....com>
---
v1->v2:
* Split from patch 2/2 in v1. (Marek, Alexander)
drivers/gpu/drm/mxsfb/lcdif_kms.c | 33 +++++++++++--------------------
1 file changed, 12 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c
index 262bc43b1079..e54200a9fcb9 100644
--- a/drivers/gpu/drm/mxsfb/lcdif_kms.c
+++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c
@@ -394,7 +394,7 @@ static void lcdif_crtc_mode_set_nofb(struct lcdif_drm_private *lcdif,
struct drm_display_mode *m = &lcdif->crtc.state->adjusted_mode;
u32 bus_flags = 0;
- if (lcdif->bridge && lcdif->bridge->timings)
+ if (lcdif->bridge->timings)
bus_flags = lcdif->bridge->timings->input_bus_flags;
else if (bridge_state)
bus_flags = bridge_state->input_bus_cfg.flags;
@@ -463,30 +463,21 @@ static void lcdif_crtc_atomic_enable(struct drm_crtc *crtc,
struct drm_display_mode *m = &lcdif->crtc.state->adjusted_mode;
struct drm_bridge_state *bridge_state = NULL;
struct drm_device *drm = lcdif->drm;
- u32 bus_format = 0;
+ u32 bus_format;
dma_addr_t paddr;
- /* If there is a bridge attached to the LCDIF, use its bus format */
- if (lcdif->bridge) {
- bridge_state =
- drm_atomic_get_new_bridge_state(state,
- lcdif->bridge);
- if (!bridge_state)
- bus_format = MEDIA_BUS_FMT_FIXED;
- else
- bus_format = bridge_state->input_bus_cfg.format;
-
- if (bus_format == MEDIA_BUS_FMT_FIXED) {
- dev_warn_once(drm->dev,
- "Bridge does not provide bus format, assuming MEDIA_BUS_FMT_RGB888_1X24.\n"
- "Please fix bridge driver by handling atomic_get_input_bus_fmts.\n");
- bus_format = MEDIA_BUS_FMT_RGB888_1X24;
- }
- }
+ bridge_state = drm_atomic_get_new_bridge_state(state, lcdif->bridge);
+ if (!bridge_state)
+ bus_format = MEDIA_BUS_FMT_FIXED;
+ else
+ bus_format = bridge_state->input_bus_cfg.format;
- /* If all else fails, default to RGB888_1X24 */
- if (!bus_format)
+ if (bus_format == MEDIA_BUS_FMT_FIXED) {
+ dev_warn_once(drm->dev,
+ "Bridge does not provide bus format, assuming MEDIA_BUS_FMT_RGB888_1X24.\n"
+ "Please fix bridge driver by handling atomic_get_input_bus_fmts.\n");
bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+ }
clk_set_rate(lcdif->clk, m->crtc_clock * 1000);
--
2.37.1
Powered by blists - more mailing lists