[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <b788e82c-4e87-bc1d-9701-b1436283e379@quicinc.com>
Date: Wed, 25 Jan 2023 12:26:18 +0530
From: Shazad Hussain <quic_shazhuss@...cinc.com>
To: Andrew Halaney <ahalaney@...hat.com>, <andersson@...nel.org>
CC: <agross@...nel.org>, <konrad.dybcio@...aro.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <bmasney@...hat.com>
Subject: Re: [PATCH 1/2] arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl
settings
On 1/25/2023 12:53 AM, Andrew Halaney wrote:
> Some of the pinctrl groups were invalid for the selected pins. Select
> the proper qup group to fix these warnings:
>
> [ 6.523566] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio135" for function "qup15"
> [ 6.535042] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio136" for function "qup15"
> [ 6.597536] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio158" for function "qup15"
> [ 6.597544] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio159" for function "qup15"
> [ 6.597991] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio0" for function "qup15"
> [ 6.597996] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio1" for function "qup15"
>
> Fixes: e073899ec3e1 ("arm64: dts: qcom: sa8540p-ride: add i2c nodes")
> Signed-off-by: Andrew Halaney <ahalaney@...hat.com>
> ---
Reviewed-by: Shazad Hussain <quic_shazhuss@...cinc.com>
> arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> index eacc1764255b..cb9fbdeb5a9e 100644
> --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> @@ -318,21 +318,21 @@ &xo_board_clk {
> &tlmm {
> i2c0_default: i2c0-default-state {
> pins = "gpio135", "gpio136";
> - function = "qup15";
> + function = "qup0";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> i2c1_default: i2c1-default-state {
> pins = "gpio158", "gpio159";
> - function = "qup15";
> + function = "qup1";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> i2c12_default: i2c12-default-state {
> pins = "gpio0", "gpio1";
> - function = "qup15";
> + function = "qup12";
> drive-strength = <2>;
> bias-pull-up;
> };
Powered by blists - more mailing lists