[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230125094513.155063-9-krzysztof.kozlowski@linaro.org>
Date: Wed, 25 Jan 2023 10:45:13 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Kukjin Kim <kgene@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: replicant@...osl.org, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht,
Martin Jücker <martin.juecker@...il.com>,
Henrik Grimler <henrik@...mler.se>,
Chanwoo Choi <cw00.choi@...sung.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 9/9] arm64: dts: exynos: use lowercase hex addresses
By convention the hex addresses should be lowercase.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 12 ++++++------
arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 2 +-
arch/arm64/boot/dts/exynos/exynos7.dtsi | 6 +++---
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 47b5ac06f0d6..9da24fe958a3 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -351,7 +351,7 @@ psci {
compatible = "arm,psci";
method = "smc";
cpu_off = <0x84000002>;
- cpu_on = <0xC4000003>;
+ cpu_on = <0xc4000003>;
};
soc: soc@0 {
@@ -1020,7 +1020,7 @@ decon_tv: decon@...80000 {
dsi: dsi@...00000 {
compatible = "samsung,exynos5433-mipi-dsi";
- reg = <0x13900000 0xC0>;
+ reg = <0x13900000 0xc0>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
@@ -1272,7 +1272,7 @@ jpeg: codec@...20000 {
mfc: codec@...e0000 {
compatible = "samsung,exynos5433-mfc";
- reg = <0x152E0000 0x10000>;
+ reg = <0x152e0000 0x10000>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "pclk", "aclk", "aclk_xiu";
clocks = <&cmu_mfc CLK_PCLK_MFC>,
@@ -1329,7 +1329,7 @@ sysmmu_tv1x: sysmmu@...30000 {
sysmmu_gscl0: sysmmu@...80000 {
compatible = "samsung,exynos-sysmmu";
- reg = <0x13C80000 0x1000>;
+ reg = <0x13c80000 0x1000>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "aclk", "pclk";
clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
@@ -1340,7 +1340,7 @@ sysmmu_gscl0: sysmmu@...80000 {
sysmmu_gscl1: sysmmu@...90000 {
compatible = "samsung,exynos-sysmmu";
- reg = <0x13C90000 0x1000>;
+ reg = <0x13c90000 0x1000>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "aclk", "pclk";
clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
@@ -1351,7 +1351,7 @@ sysmmu_gscl1: sysmmu@...90000 {
sysmmu_gscl2: sysmmu@...a0000 {
compatible = "samsung,exynos-sysmmu";
- reg = <0x13CA0000 0x1000>;
+ reg = <0x13ca0000 0x1000>;
interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "aclk", "pclk";
clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index abb3bd700d6f..f3f4a6ab4b49 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -28,7 +28,7 @@ chosen {
memory@...00000 {
device_type = "memory";
- reg = <0x0 0x40000000 0x0 0xC0000000>;
+ reg = <0x0 0x40000000 0x0 0xc0000000>;
};
usb30_vbus_reg: regulator-usb30 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index f378d8629d88..82fee1b7caab 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -119,7 +119,7 @@ psci {
compatible = "arm,psci";
method = "smc";
cpu_off = <0x84000002>;
- cpu_on = <0xC4000003>;
+ cpu_on = <0xc4000003>;
};
soc: soc@0 {
@@ -146,7 +146,7 @@ gic: interrupt-controller@...01000 {
pdma0: dma-controller@...10000 {
compatible = "arm,pl330", "arm,primecell";
- reg = <0x10E10000 0x1000>;
+ reg = <0x10e10000 0x1000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_fsys0 ACLK_PDMA0>;
clock-names = "apb_pclk";
@@ -155,7 +155,7 @@ pdma0: dma-controller@...10000 {
pdma1: dma-controller@...b0000 {
compatible = "arm,pl330", "arm,primecell";
- reg = <0x10EB0000 0x1000>;
+ reg = <0x10eb0000 0x1000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_fsys0 ACLK_PDMA1>;
clock-names = "apb_pclk";
--
2.34.1
Powered by blists - more mailing lists