| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Y9EKqwfDSsF31dLZ@kekkonen.localdomain>
Date: Wed, 25 Jan 2023 12:55:39 +0200
From: Sakari Ailus <sakari.ailus@...ux.intel.com>
To: Michael Riesch <michael.riesch@...fvision.net>
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Gerald Loacker <gerald.loacker@...fvision.net>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
Hans Verkuil <hverkuil@...all.nl>,
Marco Felsch <m.felsch@...gutronix.de>,
Mikhail Rudenko <mike.rudenko@...il.com>,
Krzysztof Hałasa <khalasa@...p.pl>,
Marek Vasut <marex@...x.de>
Subject: Re: [PATCH v2 2/2] media: i2c: add imx415 cmos image sensor driver
Hi Michael,
Thanks for the patchset.
Looks good in general, please see my comments below.
On Tue, Jan 24, 2023 at 07:01:07AM +0100, Michael Riesch wrote:
> From: Gerald Loacker <gerald.loacker@...fvision.net>
>
> Add driver for the Sony IMX415 CMOS image sensor.
>
> Signed-off-by: Gerald Loacker <gerald.loacker@...fvision.net>
> Co-developed-by: Michael Riesch <michael.riesch@...fvision.net>
> Signed-off-by: Michael Riesch <michael.riesch@...fvision.net>
> ---
> v2:
> - no changes
>
> MAINTAINERS | 1 +
> drivers/media/i2c/Kconfig | 14 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/imx415.c | 1296 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 1312 insertions(+)
> create mode 100644 drivers/media/i2c/imx415.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c9fa893bf649..803bcfa0d102 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19499,6 +19499,7 @@ L: linux-media@...r.kernel.org
> S: Maintained
> T: git git://linuxtv.org/media_tree.git
> F: Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
> +F: drivers/media/i2c/imx415.c
>
> SONY MEMORYSTICK SUBSYSTEM
> M: Maxim Levitsky <maximlevitsky@...il.com>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 833241897d63..f7c3d6232c15 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -228,6 +228,20 @@ config VIDEO_IMX412
> To compile this driver as a module, choose M here: the
> module will be called imx412.
>
> +config VIDEO_IMX415
> + tristate "Sony IMX415 sensor support"
> + depends on OF_GPIO
> + depends on I2C && VIDEO_DEV
> + select VIDEO_V4L2_SUBDEV_API
> + select MEDIA_CONTROLLER
> + select V4L2_FWNODE
> + help
> + This is a Video4Linux2 sensor driver for the Sony
> + IMX415 camera.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called imx415.
> +
> config VIDEO_MAX9271_LIB
> tristate
>
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 4d6c052bb5a7..810c615d7e32 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -48,6 +48,7 @@ obj-$(CONFIG_VIDEO_IMX334) += imx334.o
> obj-$(CONFIG_VIDEO_IMX335) += imx335.o
> obj-$(CONFIG_VIDEO_IMX355) += imx355.o
> obj-$(CONFIG_VIDEO_IMX412) += imx412.o
> +obj-$(CONFIG_VIDEO_IMX415) += imx415.o
> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
> obj-$(CONFIG_VIDEO_ISL7998X) += isl7998x.o
> obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
> diff --git a/drivers/media/i2c/imx415.c b/drivers/media/i2c/imx415.c
> new file mode 100644
> index 000000000000..a8f0b7e0bee8
> --- /dev/null
> +++ b/drivers/media/i2c/imx415.c
> @@ -0,0 +1,1296 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Driver for the Sony IMX415 CMOS Image Sensor.
> + *
> + * Copyright (C) 2022 WolfVision GmbH.
You can use 2023 now.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/videodev2.h>
> +
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define IMX415_PIXEL_ARRAY_TOP 0
> +#define IMX415_PIXEL_ARRAY_LEFT 0
> +#define IMX415_PIXEL_ARRAY_WIDTH 3864
> +#define IMX415_PIXEL_ARRAY_HEIGHT 2192
> +#define IMX415_PIXEL_ARRAY_VBLANK 58
> +
> +#define IMX415_NUM_CLK_PARAM_REGS 11
> +
> +#define IMX415_REG_8BIT(n) ((1 << 16) | (n))
> +#define IMX415_REG_16BIT(n) ((2 << 16) | (n))
> +#define IMX415_REG_24BIT(n) ((3 << 16) | (n))
> +#define IMX415_REG_SIZE_SHIFT 16
> +#define IMX415_REG_ADDR_MASK 0xffff
> +
> +#define IMX415_MODE IMX415_REG_8BIT(0x3000)
> +#define IMX415_MODE_OPERATING (0)
> +#define IMX415_MODE_STANDBY BIT(0)
> +#define IMX415_REGHOLD IMX415_REG_8BIT(0x3001)
> +#define IMX415_REGHOLD_INVALID (0)
> +#define IMX415_REGHOLD_VALID BIT(0)
> +#define IMX415_XMSTA IMX415_REG_8BIT(0x3002)
> +#define IMX415_XMSTA_START (0)
> +#define IMX415_XMSTA_STOP BIT(0)
> +#define IMX415_BCWAIT_TIME IMX415_REG_16BIT(0x3008)
> +#define IMX415_CPWAIT_TIME IMX415_REG_16BIT(0x300A)
> +#define IMX415_WINMODE IMX415_REG_8BIT(0x301C)
> +#define IMX415_ADDMODE IMX415_REG_8BIT(0x3022)
> +#define IMX415_REVERSE IMX415_REG_8BIT(0x3030)
> +#define IMX415_HREVERSE_SHIFT (0)
> +#define IMX415_VREVERSE_SHIFT BIT(0)
> +#define IMX415_ADBIT IMX415_REG_8BIT(0x3031)
> +#define IMX415_MDBIT IMX415_REG_8BIT(0x3032)
> +#define IMX415_SYS_MODE IMX415_REG_8BIT(0x3033)
> +#define IMX415_OUTSEL IMX415_REG_8BIT(0x30C0)
> +#define IMX415_DRV IMX415_REG_8BIT(0x30C1)
> +#define IMX415_VMAX IMX415_REG_24BIT(0x3024)
> +#define IMX415_HMAX IMX415_REG_16BIT(0x3028)
> +#define IMX415_SHR0 IMX415_REG_24BIT(0x3050)
> +#define IMX415_GAIN_PCG_0 IMX415_REG_16BIT(0x3090)
> +#define IMX415_AGAIN_MIN 0
> +#define IMX415_AGAIN_MAX 100
> +#define IMX415_AGAIN_STEP 1
> +#define IMX415_BLKLEVEL IMX415_REG_16BIT(0x30E2)
> +#define IMX415_BLKLEVEL_DEFAULT 50
> +#define IMX415_TPG_EN_DUOUT IMX415_REG_8BIT(0x30E4)
> +#define IMX415_TPG_PATSEL_DUOUT IMX415_REG_8BIT(0x30E6)
> +#define IMX415_TPG_COLORWIDTH IMX415_REG_8BIT(0x30E8)
> +#define IMX415_TESTCLKEN_MIPI IMX415_REG_8BIT(0x3110)
> +#define IMX415_INCKSEL1 IMX415_REG_8BIT(0x3115)
> +#define IMX415_INCKSEL2 IMX415_REG_8BIT(0x3116)
> +#define IMX415_INCKSEL3 IMX415_REG_16BIT(0x3118)
> +#define IMX415_INCKSEL4 IMX415_REG_16BIT(0x311A)
> +#define IMX415_INCKSEL5 IMX415_REG_8BIT(0x311E)
> +#define IMX415_DIG_CLP_MODE IMX415_REG_8BIT(0x32C8)
> +#define IMX415_WRJ_OPEN IMX415_REG_8BIT(0x3390)
> +#define IMX415_SENSOR_INFO IMX415_REG_16BIT(0x3F12)
> +#define IMX415_SENSOR_INFO_MASK 0xFFF
> +#define IMX415_CHIP_ID 0x514
> +#define IMX415_LANEMODE IMX415_REG_16BIT(0x4001)
> +#define IMX415_LANEMODE_2 1
> +#define IMX415_LANEMODE_4 3
> +#define IMX415_TXCLKESC_FREQ IMX415_REG_16BIT(0x4004)
> +#define IMX415_INCKSEL6 IMX415_REG_8BIT(0x400C)
> +#define IMX415_TCLKPOST IMX415_REG_16BIT(0x4018)
> +#define IMX415_TCLKPREPARE IMX415_REG_16BIT(0x401A)
> +#define IMX415_TCLKTRAIL IMX415_REG_16BIT(0x401C)
> +#define IMX415_TCLKZERO IMX415_REG_16BIT(0x401E)
> +#define IMX415_THSPREPARE IMX415_REG_16BIT(0x4020)
> +#define IMX415_THSZERO IMX415_REG_16BIT(0x4022)
> +#define IMX415_THSTRAIL IMX415_REG_16BIT(0x4024)
> +#define IMX415_THSEXIT IMX415_REG_16BIT(0x4026)
> +#define IMX415_TLPX IMX415_REG_16BIT(0x4028)
> +#define IMX415_INCKSEL7 IMX415_REG_8BIT(0x4074)
> +
> +struct imx415_reg {
> + u32 address;
> + u32 val;
> +};
> +
> +static const char *const imx415_supply_names[] = {
> + "dvdd",
> + "ovdd",
> + "avdd",
> +};
> +
> +/*
> + * The IMX415 data sheet uses lane rates but v4l2 uses link frequency to
> + * describe MIPI CSI-2 speed. This driver uses lane rates wherever possible
> + * and converts them to link frequencies by a factor of two when needed.
> + */
> +static const s64 link_freq_menu_items[] = {
> + 594000000 / 2, 720000000 / 2, 891000000 / 2,
> + 1440000000 / 2, 1485000000 / 2,
> +};
> +
> +struct imx415_clk_params {
> + u64 lane_rate;
> + u64 inck;
> + struct imx415_reg regs[IMX415_NUM_CLK_PARAM_REGS];
> +};
> +
> +/* INCK Settings - includes all lane rate and INCK dependent registers */
> +static const struct imx415_clk_params imx415_clk_params[] = {
> + {
> + .lane_rate = 594000000,
> + .inck = 27000000,
> + .regs[0] = { IMX415_BCWAIT_TIME, 0x05D },
> + .regs[1] = { IMX415_CPWAIT_TIME, 0x042 },
> + .regs[2] = { IMX415_SYS_MODE, 0x7 },
> + .regs[3] = { IMX415_INCKSEL1, 0x00 },
> + .regs[4] = { IMX415_INCKSEL2, 0x23 },
> + .regs[5] = { IMX415_INCKSEL3, 0x084 },
> + .regs[6] = { IMX415_INCKSEL4, 0x0E7 },
> + .regs[7] = { IMX415_INCKSEL5, 0x23 },
> + .regs[8] = { IMX415_INCKSEL6, 0x0 },
> + .regs[9] = { IMX415_INCKSEL7, 0x1 },
> + .regs[10] = { IMX415_TXCLKESC_FREQ, 0x06C0 },
> + },
> + {
> + .lane_rate = 720000000,
> + .inck = 24000000,
> + .regs[0] = { IMX415_BCWAIT_TIME, 0x054 },
> + .regs[1] = { IMX415_CPWAIT_TIME, 0x03B },
> + .regs[2] = { IMX415_SYS_MODE, 0x9 },
> + .regs[3] = { IMX415_INCKSEL1, 0x00 },
> + .regs[4] = { IMX415_INCKSEL2, 0x23 },
> + .regs[5] = { IMX415_INCKSEL3, 0x0B4 },
> + .regs[6] = { IMX415_INCKSEL4, 0x0FC },
> + .regs[7] = { IMX415_INCKSEL5, 0x23 },
> + .regs[8] = { IMX415_INCKSEL6, 0x0 },
> + .regs[9] = { IMX415_INCKSEL7, 0x1 },
> + .regs[10] = { IMX415_TXCLKESC_FREQ, 0x0600 },
> + },
> + {
> + .lane_rate = 891000000,
> + .inck = 27000000,
> + .regs[0] = { IMX415_BCWAIT_TIME, 0x05D },
> + .regs[1] = { IMX415_CPWAIT_TIME, 0x042 },
> + .regs[2] = { IMX415_SYS_MODE, 0x5 },
> + .regs[3] = { IMX415_INCKSEL1, 0x00 },
> + .regs[4] = { IMX415_INCKSEL2, 0x23 },
> + .regs[5] = { IMX415_INCKSEL3, 0x0C6 },
> + .regs[6] = { IMX415_INCKSEL4, 0x0E7 },
> + .regs[7] = { IMX415_INCKSEL5, 0x23 },
> + .regs[8] = { IMX415_INCKSEL6, 0x0 },
> + .regs[9] = { IMX415_INCKSEL7, 0x1 },
> + .regs[10] = { IMX415_TXCLKESC_FREQ, 0x06C0 },
> + },
> + {
> + .lane_rate = 1440000000,
> + .inck = 24000000,
> + .regs[0] = { IMX415_BCWAIT_TIME, 0x054 },
> + .regs[1] = { IMX415_CPWAIT_TIME, 0x03B },
> + .regs[2] = { IMX415_SYS_MODE, 0x8 },
> + .regs[3] = { IMX415_INCKSEL1, 0x00 },
> + .regs[4] = { IMX415_INCKSEL2, 0x23 },
> + .regs[5] = { IMX415_INCKSEL3, 0x0B4 },
> + .regs[6] = { IMX415_INCKSEL4, 0x0FC },
> + .regs[7] = { IMX415_INCKSEL5, 0x23 },
> + .regs[8] = { IMX415_INCKSEL6, 0x1 },
> + .regs[9] = { IMX415_INCKSEL7, 0x0 },
> + .regs[10] = { IMX415_TXCLKESC_FREQ, 0x0600 },
> + },
> + {
> + .lane_rate = 1485000000,
> + .inck = 27000000,
> + .regs[0] = { IMX415_BCWAIT_TIME, 0x05D },
> + .regs[1] = { IMX415_CPWAIT_TIME, 0x042 },
> + .regs[2] = { IMX415_SYS_MODE, 0x8 },
> + .regs[3] = { IMX415_INCKSEL1, 0x00 },
> + .regs[4] = { IMX415_INCKSEL2, 0x23 },
> + .regs[5] = { IMX415_INCKSEL3, 0x0A5 },
> + .regs[6] = { IMX415_INCKSEL4, 0x0E7 },
> + .regs[7] = { IMX415_INCKSEL5, 0x23 },
> + .regs[8] = { IMX415_INCKSEL6, 0x1 },
> + .regs[9] = { IMX415_INCKSEL7, 0x0 },
> + .regs[10] = { IMX415_TXCLKESC_FREQ, 0x06C0 },
> + },
> +};
> +
> +/* all-pixel 2-lane 720 Mbps 15.74 Hz mode */
> +static const struct imx415_reg imx415_mode_2_720[] = {
> + { IMX415_VMAX, 0x08CA },
> + { IMX415_HMAX, 0x07F0 },
> + { IMX415_LANEMODE, IMX415_LANEMODE_2 },
> + { IMX415_TCLKPOST, 0x006F },
> + { IMX415_TCLKPREPARE, 0x002F },
> + { IMX415_TCLKTRAIL, 0x002F },
> + { IMX415_TCLKZERO, 0x00BF },
> + { IMX415_THSPREPARE, 0x002F },
> + { IMX415_THSZERO, 0x0057 },
> + { IMX415_THSTRAIL, 0x002F },
> + { IMX415_THSEXIT, 0x004F },
> + { IMX415_TLPX, 0x0027 },
> +};
> +
> +/* all-pixel 2-lane 1440 Mbps 30.01 Hz mode */
> +static const struct imx415_reg imx415_mode_2_1440[] = {
> + { IMX415_VMAX, 0x08CA },
> + { IMX415_HMAX, 0x042A },
> + { IMX415_LANEMODE, IMX415_LANEMODE_2 },
> + { IMX415_TCLKPOST, 0x009F },
> + { IMX415_TCLKPREPARE, 0x0057 },
> + { IMX415_TCLKTRAIL, 0x0057 },
> + { IMX415_TCLKZERO, 0x0187 },
> + { IMX415_THSPREPARE, 0x005F },
> + { IMX415_THSZERO, 0x00A7 },
> + { IMX415_THSTRAIL, 0x005F },
> + { IMX415_THSEXIT, 0x0097 },
> + { IMX415_TLPX, 0x004F },
> +};
> +
> +/* all-pixel 4-lane 891 Mbps 30 Hz mode */
> +static const struct imx415_reg imx415_mode_4_891[] = {
> + { IMX415_VMAX, 0x08CA },
> + { IMX415_HMAX, 0x044C },
> + { IMX415_LANEMODE, IMX415_LANEMODE_4 },
> + { IMX415_TCLKPOST, 0x007F },
> + { IMX415_TCLKPREPARE, 0x0037 },
> + { IMX415_TCLKTRAIL, 0x0037 },
> + { IMX415_TCLKZERO, 0x00F7 },
> + { IMX415_THSPREPARE, 0x003F },
> + { IMX415_THSZERO, 0x006F },
> + { IMX415_THSTRAIL, 0x003F },
> + { IMX415_THSEXIT, 0x005F },
> + { IMX415_TLPX, 0x002F },
> +};
> +
> +struct imx415_mode_reg_list {
> + u32 num_of_regs;
> + const struct imx415_reg *regs;
> +};
> +
> +/*
> + * Mode : number of lanes, lane rate and frame rate dependent settings
> + *
> + * pixel_rate and hmax_pix are needed to calculate hblank for the v4l2 ctrl
> + * interface. These values can not be found in the data sheet and should be
> + * treated as virtual values. Use following table when adding new modes.
> + *
> + * lane_rate lanes fps hmax_pix pixel_rate
> + *
> + * 594 2 10.000 4400 99000000
> + * 891 2 15.000 4400 148500000
> + * 720 2 15.748 4064 144000000
> + * 1782 2 30.000 4400 297000000
> + * 2079 2 30.000 4400 297000000
> + * 1440 2 30.019 4510 304615385
> + *
> + * 594 4 20.000 5500 247500000
> + * 594 4 25.000 4400 247500000
> + * 720 4 25.000 4400 247500000
> + * 720 4 30.019 4510 304615385
> + * 891 4 30.000 4400 297000000
> + * 1440 4 30.019 4510 304615385
> + * 1440 4 60.038 4510 609230769
> + * 1485 4 60.000 4400 594000000
> + * 1782 4 60.000 4400 594000000
> + * 2079 4 60.000 4400 594000000
> + * 2376 4 90.164 4392 891000000
> + */
> +struct imx415_mode {
> + u64 lane_rate;
> + u32 lanes;
> + u32 hmax_pix;
> + u64 pixel_rate;
> + struct imx415_mode_reg_list reg_list;
> +};
> +
> +/* mode configs */
> +static const struct imx415_mode supported_modes[] = {
> + {
> + .lane_rate = 720000000,
> + .lanes = 2,
> + .hmax_pix = 4064,
> + .pixel_rate = 144000000,
> + .reg_list = {
> + .num_of_regs = ARRAY_SIZE(imx415_mode_2_720),
> + .regs = imx415_mode_2_720,
> + },
> + },
> + {
> + .lane_rate = 1440000000,
> + .lanes = 2,
> + .hmax_pix = 4510,
> + .pixel_rate = 304615385,
> + .reg_list = {
> + .num_of_regs = ARRAY_SIZE(imx415_mode_2_1440),
> + .regs = imx415_mode_2_1440,
> + },
> + },
> + {
> + .lane_rate = 891000000,
> + .lanes = 4,
> + .hmax_pix = 4400,
> + .pixel_rate = 297000000,
> + .reg_list = {
> + .num_of_regs = ARRAY_SIZE(imx415_mode_4_891),
> + .regs = imx415_mode_4_891,
> + },
> + },
> +};
> +
> +static const struct regmap_config imx415_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> +};
> +
> +static const char *const imx415_test_pattern_menu[] = {
> + "disabled",
> + "solid black",
> + "solid white",
> + "solid dark gray",
> + "solid light gray",
> + "stripes light/dark grey",
> + "stripes dark/light grey",
> + "stripes black/dark grey",
> + "stripes dark grey/black",
> + "stripes black/white",
> + "stripes white/black",
> + "horizontal color bar",
> + "vertical color bar",
> +};
> +
> +struct imx415 {
> + struct device *dev;
> + struct clk *clk;
> + struct regulator_bulk_data supplies[ARRAY_SIZE(imx415_supply_names)];
> + struct gpio_desc *reset;
> + struct regmap *regmap;
> +
> + const struct imx415_clk_params *clk_params;
> +
> + bool streaming;
> +
> + struct v4l2_subdev subdev;
> + struct media_pad pad;
> +
> + struct v4l2_ctrl_handler ctrls;
> + struct v4l2_ctrl *hblank;
> + struct v4l2_ctrl *vblank;
> + struct v4l2_ctrl *exposure;
> + struct v4l2_ctrl *again;
> + struct v4l2_ctrl *pixel_rate;
> + struct v4l2_ctrl *hflip;
> + struct v4l2_ctrl *vflip;
> + struct v4l2_ctrl *link_freq;
Only store controls you need.
> +
> + int cur_mode;
> + int num_data_lanes;
unsigned int, please.
> +};
> +
> +/*
> + * This table includes fixed register settings and a bunch of undocumented
> + * registers that have to be set to another value than default.
> + */
> +static const struct imx415_reg imx415_init_table[] = {
> + /* use all-pixel readout mode, no flip */
> + { IMX415_WINMODE, 0x00 },
> + { IMX415_ADDMODE, 0x00 },
> + { IMX415_REVERSE, 0x00 },
> + /* use RAW 10-bit mode */
> + { IMX415_ADBIT, 0x00 },
> + { IMX415_MDBIT, 0x00 },
> + /* output VSYNC on XVS and low on XHS */
> + { IMX415_OUTSEL, 0x22 },
> + { IMX415_DRV, 0x00 },
> +
> + /* SONY magic registers */
> + { IMX415_REG_8BIT(0x32D4), 0x21 },
> + { IMX415_REG_8BIT(0x32EC), 0xA1 },
> + { IMX415_REG_8BIT(0x3452), 0x7F },
> + { IMX415_REG_8BIT(0x3453), 0x03 },
> + { IMX415_REG_8BIT(0x358A), 0x04 },
> + { IMX415_REG_8BIT(0x35A1), 0x02 },
> + { IMX415_REG_8BIT(0x36BC), 0x0C },
> + { IMX415_REG_8BIT(0x36CC), 0x53 },
> + { IMX415_REG_8BIT(0x36CD), 0x00 },
> + { IMX415_REG_8BIT(0x36CE), 0x3C },
> + { IMX415_REG_8BIT(0x36D0), 0x8C },
> + { IMX415_REG_8BIT(0x36D1), 0x00 },
> + { IMX415_REG_8BIT(0x36D2), 0x71 },
> + { IMX415_REG_8BIT(0x36D4), 0x3C },
> + { IMX415_REG_8BIT(0x36D6), 0x53 },
> + { IMX415_REG_8BIT(0x36D7), 0x00 },
> + { IMX415_REG_8BIT(0x36D8), 0x71 },
> + { IMX415_REG_8BIT(0x36DA), 0x8C },
> + { IMX415_REG_8BIT(0x36DB), 0x00 },
> + { IMX415_REG_8BIT(0x3724), 0x02 },
> + { IMX415_REG_8BIT(0x3726), 0x02 },
> + { IMX415_REG_8BIT(0x3732), 0x02 },
> + { IMX415_REG_8BIT(0x3734), 0x03 },
> + { IMX415_REG_8BIT(0x3736), 0x03 },
> + { IMX415_REG_8BIT(0x3742), 0x03 },
> + { IMX415_REG_8BIT(0x3862), 0xE0 },
> + { IMX415_REG_8BIT(0x38CC), 0x30 },
> + { IMX415_REG_8BIT(0x38CD), 0x2F },
> + { IMX415_REG_8BIT(0x395C), 0x0C },
> + { IMX415_REG_8BIT(0x3A42), 0xD1 },
> + { IMX415_REG_8BIT(0x3A4C), 0x77 },
> + { IMX415_REG_8BIT(0x3AE0), 0x02 },
> + { IMX415_REG_8BIT(0x3AEC), 0x0C },
> + { IMX415_REG_8BIT(0x3B00), 0x2E },
> + { IMX415_REG_8BIT(0x3B06), 0x29 },
> + { IMX415_REG_8BIT(0x3B98), 0x25 },
> + { IMX415_REG_8BIT(0x3B99), 0x21 },
> + { IMX415_REG_8BIT(0x3B9B), 0x13 },
> + { IMX415_REG_8BIT(0x3B9C), 0x13 },
> + { IMX415_REG_8BIT(0x3B9D), 0x13 },
> + { IMX415_REG_8BIT(0x3B9E), 0x13 },
> + { IMX415_REG_8BIT(0x3BA1), 0x00 },
> + { IMX415_REG_8BIT(0x3BA2), 0x06 },
> + { IMX415_REG_8BIT(0x3BA3), 0x0B },
> + { IMX415_REG_8BIT(0x3BA4), 0x10 },
> + { IMX415_REG_8BIT(0x3BA5), 0x14 },
> + { IMX415_REG_8BIT(0x3BA6), 0x18 },
> + { IMX415_REG_8BIT(0x3BA7), 0x1A },
> + { IMX415_REG_8BIT(0x3BA8), 0x1A },
> + { IMX415_REG_8BIT(0x3BA9), 0x1A },
> + { IMX415_REG_8BIT(0x3BAC), 0xED },
> + { IMX415_REG_8BIT(0x3BAD), 0x01 },
> + { IMX415_REG_8BIT(0x3BAE), 0xF6 },
> + { IMX415_REG_8BIT(0x3BAF), 0x02 },
> + { IMX415_REG_8BIT(0x3BB0), 0xA2 },
> + { IMX415_REG_8BIT(0x3BB1), 0x03 },
> + { IMX415_REG_8BIT(0x3BB2), 0xE0 },
> + { IMX415_REG_8BIT(0x3BB3), 0x03 },
> + { IMX415_REG_8BIT(0x3BB4), 0xE0 },
> + { IMX415_REG_8BIT(0x3BB5), 0x03 },
> + { IMX415_REG_8BIT(0x3BB6), 0xE0 },
> + { IMX415_REG_8BIT(0x3BB7), 0x03 },
> + { IMX415_REG_8BIT(0x3BB8), 0xE0 },
> + { IMX415_REG_8BIT(0x3BBA), 0xE0 },
> + { IMX415_REG_8BIT(0x3BBC), 0xDA },
> + { IMX415_REG_8BIT(0x3BBE), 0x88 },
> + { IMX415_REG_8BIT(0x3BC0), 0x44 },
> + { IMX415_REG_8BIT(0x3BC2), 0x7B },
> + { IMX415_REG_8BIT(0x3BC4), 0xA2 },
> + { IMX415_REG_8BIT(0x3BC8), 0xBD },
> + { IMX415_REG_8BIT(0x3BCA), 0xBD },
> +};
> +
> +static inline struct imx415 *to_imx415(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct imx415, subdev);
> +}
> +
> +static int imx415_read(struct imx415 *sensor, u32 addr)
> +{
> + u8 data[3] = { 0, 0, 0 };
Explicitly initialise the first entry only.
> + int ret;
> +
> + ret = regmap_raw_read(sensor->regmap, addr & IMX415_REG_ADDR_MASK, data,
> + (addr >> IMX415_REG_SIZE_SHIFT) & 3);
> + if (ret < 0)
> + return ret;
> +
> + return (data[2] << 16) | (data[1] << 8) | data[0];
> +}
> +
> +static int imx415_write(struct imx415 *sensor, u32 addr, u32 value)
> +{
> + u8 data[3] = { value & 0xff, (value >> 8) & 0xff, value >> 16 };
> + int ret;
> +
> + ret = regmap_raw_write(sensor->regmap, addr & IMX415_REG_ADDR_MASK,
> + data, (addr >> IMX415_REG_SIZE_SHIFT) & 3);
> + if (ret < 0)
> + dev_err_ratelimited(sensor->dev,
> + "%u-bit write to 0x%04x failed: %d\n",
> + ((addr >> IMX415_REG_SIZE_SHIFT) & 3) * 8,
> + addr & IMX415_REG_ADDR_MASK, ret);
> +
> + return ret;
> +}
> +
> +static int imx415_set_testpattern(struct imx415 *sensor, int val)
> +{
> + int ret;
> +
> + if (val) {
> + ret = imx415_write(sensor, IMX415_BLKLEVEL, 0x00);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_TPG_EN_DUOUT, 0x01);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_TPG_PATSEL_DUOUT, val - 1);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_TPG_COLORWIDTH, 0x01);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_TESTCLKEN_MIPI, 0x20);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_DIG_CLP_MODE, 0x00);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_WRJ_OPEN, 0x00);
> + } else {
> + ret = imx415_write(sensor, IMX415_BLKLEVEL,
> + IMX415_BLKLEVEL_DEFAULT);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_TPG_EN_DUOUT, 0x00);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_TESTCLKEN_MIPI, 0x00);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_DIG_CLP_MODE, 0x01);
> + if (ret)
> + return ret;
> + ret = imx415_write(sensor, IMX415_WRJ_OPEN, 0x01);
> + }
> + return ret;
> +}
> +
> +static int imx415_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct imx415 *sensor = container_of(ctrl->handler, struct imx415,
> + ctrls);
> + const struct v4l2_mbus_framefmt *format;
> + struct v4l2_subdev_state *state;
> + unsigned int vmax;
> + unsigned int flip;
> +
> + if (!sensor->streaming)
> + return 0;
> +
> + state = v4l2_subdev_get_locked_active_state(&sensor->subdev);
> + format = v4l2_subdev_get_pad_format(&sensor->subdev, state, 0);
> +
> + switch (ctrl->id) {
> + case V4L2_CID_EXPOSURE:
> + /* clamp the exposure value to VMAX. */
> + vmax = format->height + sensor->vblank->cur.val;
> + ctrl->val = min_t(int, ctrl->val, vmax);
> + return imx415_write(sensor, IMX415_SHR0, vmax - ctrl->val);
> +
> + case V4L2_CID_ANALOGUE_GAIN:
> + /* analogue gain in 0.3 dB step size */
> + return imx415_write(sensor, IMX415_GAIN_PCG_0, ctrl->val);
> +
> + case V4L2_CID_HFLIP:
> + case V4L2_CID_VFLIP:
> + flip = (sensor->hflip->val << IMX415_HREVERSE_SHIFT) |
> + (sensor->vflip->val << IMX415_VREVERSE_SHIFT);
> + return imx415_write(sensor, IMX415_REVERSE, flip);
> +
> + case V4L2_CID_TEST_PATTERN:
> + return imx415_set_testpattern(sensor, ctrl->val);
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct v4l2_ctrl_ops imx415_ctrl_ops = {
> + .s_ctrl = imx415_s_ctrl,
> +};
> +
> +static int imx415_ctrls_init(struct imx415 *sensor)
> +{
> + struct v4l2_fwnode_device_properties props;
> + u64 pixel_rate = supported_modes[sensor->cur_mode].pixel_rate;
> + u64 lane_rate = supported_modes[sensor->cur_mode].lane_rate;
> + u32 exposure_max = IMX415_PIXEL_ARRAY_HEIGHT +
> + IMX415_PIXEL_ARRAY_VBLANK - 8;
> + u32 hblank;
> + unsigned int i;
> + int ret;
> +
> + ret = v4l2_fwnode_device_parse(sensor->dev, &props);
> + if (ret < 0)
> + return ret;
> +
> + v4l2_ctrl_handler_init(&sensor->ctrls, 9);
> +
> + for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); ++i) {
> + if (lane_rate == link_freq_menu_items[i] * 2)
> + break;
> + }
> + if (i == ARRAY_SIZE(link_freq_menu_items)) {
> + return dev_err_probe(sensor->dev, -EINVAL,
> + "lane rate %llu not supported\n",
> + lane_rate);
> + }
> +
> + sensor->link_freq =
> + v4l2_ctrl_new_int_menu(&sensor->ctrls, &imx415_ctrl_ops,
> + V4L2_CID_LINK_FREQ,
> + ARRAY_SIZE(link_freq_menu_items) - 1, i,
> + link_freq_menu_items);
> +
> + if (sensor->link_freq)
> + sensor->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + sensor->exposure = v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops,
> + V4L2_CID_EXPOSURE, 4, exposure_max,
> + 1, exposure_max);
> +
> + sensor->again = v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops,
> + V4L2_CID_ANALOGUE_GAIN,
> + IMX415_AGAIN_MIN, IMX415_AGAIN_MAX,
> + IMX415_AGAIN_STEP, IMX415_AGAIN_MIN);
> +
> + hblank = supported_modes[sensor->cur_mode].hmax_pix -
> + IMX415_PIXEL_ARRAY_WIDTH;
> + sensor->hblank = v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops,
> + V4L2_CID_HBLANK, hblank, hblank, 1,
> + hblank);
> + if (sensor->hblank)
> + sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + sensor->vblank = v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops,
> + V4L2_CID_VBLANK,
> + IMX415_PIXEL_ARRAY_VBLANK,
> + IMX415_PIXEL_ARRAY_VBLANK, 1,
> + IMX415_PIXEL_ARRAY_VBLANK);
> + if (sensor->vblank)
> + sensor->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + /*
> + * The pixel rate used here is a virtual value and can be used for
> + * calculating the frame rate together with hblank. It may not
> + * necessarily be the physically correct pixel clock.
> + */
> + sensor->pixel_rate = v4l2_ctrl_new_std(&sensor->ctrls, NULL,
> + V4L2_CID_PIXEL_RATE, pixel_rate,
> + pixel_rate, 1, pixel_rate);
> +
> + sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops,
> + V4L2_CID_HFLIP, 0, 1, 1, 0);
> + sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls, &imx415_ctrl_ops,
> + V4L2_CID_VFLIP, 0, 1, 1, 0);
> +
> + v4l2_ctrl_new_std_menu_items(&sensor->ctrls, &imx415_ctrl_ops,
> + V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(imx415_test_pattern_menu) - 1,
> + 0, 0, imx415_test_pattern_menu);
> +
> + v4l2_ctrl_new_fwnode_properties(&sensor->ctrls, &imx415_ctrl_ops,
> + &props);
> +
> + if (sensor->ctrls.error) {
> + dev_err_probe(sensor->dev, sensor->ctrls.error,
> + "failed to add controls\n");
> + v4l2_ctrl_handler_free(&sensor->ctrls);
> + return sensor->ctrls.error;
> + }
> + sensor->subdev.ctrl_handler = &sensor->ctrls;
> +
> + return 0;
> +}
> +
> +static int imx415_set_mode(struct imx415 *sensor, int mode)
> +{
> + const struct imx415_reg *reg;
> + unsigned int i;
> + int ret = 0;
> +
> + if (mode >= ARRAY_SIZE(supported_modes)) {
> + dev_err(sensor->dev, "Mode %d not supported\n", mode);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < supported_modes[mode].reg_list.num_of_regs; ++i) {
> + reg = &supported_modes[mode].reg_list.regs[i];
> + ret = imx415_write(sensor, reg->address, reg->val);
> + if (ret)
> + return ret;
> + }
> +
> + for (i = 0; i < IMX415_NUM_CLK_PARAM_REGS; ++i) {
> + reg = &sensor->clk_params->regs[i];
> + ret = imx415_write(sensor, reg->address, reg->val);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int imx415_setup(struct imx415 *sensor, struct v4l2_subdev_state *state)
> +{
> + unsigned int i;
> + int ret;
> +
> + for (i = 0; i < ARRAY_SIZE(imx415_init_table); ++i) {
> + ret = imx415_write(sensor, imx415_init_table[i].address,
> + imx415_init_table[i].val);
> + if (ret)
> + return ret;
> + }
> +
> + return imx415_set_mode(sensor, sensor->cur_mode);
> +}
> +
> +static int imx415_stream_on(struct imx415 *sensor)
> +{
> + int ret;
> +
> + ret = imx415_write(sensor, IMX415_MODE, IMX415_MODE_OPERATING);
> + if (ret)
> + return ret;
> +
> + /* wait at least 24 ms for internal regulator stabilization */
> + msleep(30);
This is a very, very long time to wait for a regulator. Most probably
either the time is too long or we're waiting for something else.
> +
> + return imx415_write(sensor, IMX415_XMSTA, IMX415_XMSTA_START);
> +}
> +
> +static int imx415_stream_off(struct imx415 *sensor)
> +{
> + int ret;
> +
> + ret = imx415_write(sensor, IMX415_XMSTA, IMX415_XMSTA_STOP);
> + if (ret)
> + return ret;
> +
> + return imx415_write(sensor, IMX415_MODE, IMX415_MODE_STANDBY);
> +}
> +
> +static int imx415_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct imx415 *sensor = to_imx415(sd);
> + struct v4l2_subdev_state *state;
> + int ret;
> +
> + state = v4l2_subdev_lock_and_get_active_state(sd);
> +
> + if (!enable) {
> + ret = imx415_stream_off(sensor);
> +
> + pm_runtime_mark_last_busy(sensor->dev);
> + pm_runtime_put_autosuspend(sensor->dev);
> +
> + sensor->streaming = false;
> +
> + goto unlock;
> + }
> +
> + ret = pm_runtime_resume_and_get(sensor->dev);
> + if (ret < 0)
> + goto unlock;
> +
> + ret = imx415_setup(sensor, state);
> + if (ret < 0)
> + goto err_pm;
> +
> + /*
> + * Set streaming to true to ensure __v4l2_ctrl_handler_setup() will set
> + * the controls. The flag is reset to false further down if an error
> + * occurs.
> + */
> + sensor->streaming = true;
> +
> + ret = __v4l2_ctrl_handler_setup(&sensor->ctrls);
> + if (ret < 0)
> + goto err_pm;
> +
> + ret = imx415_stream_on(sensor);
> + if (ret)
> + goto err_pm;
> +
> +unlock:
> + v4l2_subdev_unlock_state(state);
> +
> + return ret;
> +
> +err_pm:
> + /*
> + * In case of error, turn the power off synchronously as the device
> + * likely has no other chance to recover.
> + */
> + pm_runtime_put_sync(sensor->dev);
> + sensor->streaming = false;
> +
> + goto unlock;
> +}
> +
> +static int imx415_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->index != 0)
> + return -EINVAL;
> +
> + code->code = MEDIA_BUS_FMT_SGBRG10_1X10;
> +
> + return 0;
> +}
> +
> +static int imx415_enum_frame_size(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + const struct v4l2_mbus_framefmt *format;
> +
> + format = v4l2_subdev_get_pad_format(sd, state, fse->pad);
> +
> + if (fse->index > 0 || fse->code != format->code)
> + return -EINVAL;
> +
> + fse->min_width = IMX415_PIXEL_ARRAY_WIDTH;
> + fse->max_width = fse->min_width;
> + fse->min_height = IMX415_PIXEL_ARRAY_HEIGHT;
> + fse->max_height = fse->min_height;
> + return 0;
> +}
> +
> +static int imx415_get_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_format *fmt)
> +{
> + fmt->format = *v4l2_subdev_get_pad_format(sd, state, fmt->pad);
> +
> + return 0;
> +}
> +
> +static int imx415_set_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct v4l2_mbus_framefmt *format;
> +
> + format = v4l2_subdev_get_pad_format(sd, state, fmt->pad);
> +
> + format->width = fmt->format.width;
> + format->height = fmt->format.height;
> + format->code = MEDIA_BUS_FMT_SGBRG10_1X10;
> + format->field = V4L2_FIELD_NONE;
> + format->colorspace = V4L2_COLORSPACE_RAW;
> + format->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> + format->quantization = V4L2_QUANTIZATION_DEFAULT;
> + format->xfer_func = V4L2_XFER_FUNC_NONE;
> +
> + fmt->format = *format;
> + return 0;
> +}
> +
> +static int imx415_get_selection(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_selection *sel)
> +{
> + switch (sel->target) {
> + case V4L2_SEL_TGT_CROP:
> + case V4L2_SEL_TGT_CROP_DEFAULT:
> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + sel->r.top = IMX415_PIXEL_ARRAY_TOP;
> + sel->r.left = IMX415_PIXEL_ARRAY_LEFT;
> + sel->r.width = IMX415_PIXEL_ARRAY_WIDTH;
> + sel->r.height = IMX415_PIXEL_ARRAY_HEIGHT;
> +
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int imx415_init_cfg(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + struct v4l2_subdev_format format = {
> + .format = {
> + .width = IMX415_PIXEL_ARRAY_WIDTH,
> + .height = IMX415_PIXEL_ARRAY_HEIGHT,
> + },
> + };
> +
> + imx415_set_format(sd, state, &format);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops imx415_subdev_video_ops = {
> + .s_stream = imx415_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops imx415_subdev_pad_ops = {
> + .enum_mbus_code = imx415_enum_mbus_code,
> + .enum_frame_size = imx415_enum_frame_size,
> + .get_fmt = imx415_get_format,
> + .set_fmt = imx415_set_format,
> + .get_selection = imx415_get_selection,
> + .init_cfg = imx415_init_cfg,
> +};
> +
> +static const struct v4l2_subdev_ops imx415_subdev_ops = {
> + .video = &imx415_subdev_video_ops,
> + .pad = &imx415_subdev_pad_ops,
> +};
> +
> +static int imx415_subdev_init(struct imx415 *sensor)
> +{
> + struct i2c_client *client = to_i2c_client(sensor->dev);
> + int ret;
> +
> + v4l2_i2c_subdev_init(&sensor->subdev, client, &imx415_subdev_ops);
> +
> + ret = imx415_ctrls_init(sensor);
> + if (ret < 0)
> + return ret;
> +
> + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
Add V4L2_SUBDEV_FL_HAS_EVENTS.
> + sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
> + sensor->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> + ret = media_entity_pads_init(&sensor->subdev.entity, 1, &sensor->pad);
> + if (ret < 0) {
> + v4l2_ctrl_handler_free(&sensor->ctrls);
> + return ret;
> + }
> +
> + sensor->subdev.state_lock = sensor->subdev.ctrl_handler->lock;
> + v4l2_subdev_init_finalize(&sensor->subdev);
> +
> + return ret;
> +}
> +
> +static void imx415_subdev_cleanup(struct imx415 *sensor)
> +{
> + media_entity_cleanup(&sensor->subdev.entity);
> + v4l2_ctrl_handler_free(&sensor->ctrls);
> +}
> +
> +static int imx415_power_on(struct imx415 *sensor)
> +{
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(sensor->supplies),
> + sensor->supplies);
> + if (ret < 0)
> + return ret;
> +
> + ret = gpiod_direction_output(sensor->reset, 0);
Setting the direction should be done during probe, otherwise use
gpiod_set_value().
> + if (ret < 0)
> + goto err_supply;
> +
> + udelay(1);
> +
> + ret = clk_prepare_enable(sensor->clk);
> + if (ret < 0)
> + goto err_reset;
> +
> + /*
> + * Data sheet states that 20 us are required before communication start,
> + * but this doesn't work in all cases. Use 100 us to be on the safe
> + * side.
> + */
> + usleep_range(100, 200);
> +
> + return 0;
> +
> +err_reset:
> + gpiod_direction_output(sensor->reset, 1);
> +err_supply:
> + regulator_bulk_disable(ARRAY_SIZE(sensor->supplies), sensor->supplies);
> + return ret;
> +}
> +
> +static void imx415_power_off(struct imx415 *sensor)
> +{
> + clk_disable_unprepare(sensor->clk);
> + gpiod_direction_output(sensor->reset, 1);
> + regulator_bulk_disable(ARRAY_SIZE(sensor->supplies), sensor->supplies);
> +}
> +
> +static int imx415_identify_model(struct imx415 *sensor)
> +{
> + int model, ret;
> +
> + /*
> + * While most registers can be read when the sensor is in standby, this
> + * is not the case of the sensor info register :-(
> + */
> + ret = imx415_write(sensor, IMX415_MODE, IMX415_MODE_OPERATING);
> + if (ret < 0)
> + return dev_err_probe(sensor->dev, ret,
> + "failed to get sensor out of standby\n");
> +
> + /*
> + * According to the datasheet we have to wait at least 63 us after
> + * leaving standby mode. But this doesn't work even after 30 ms.
> + * So probably this should be 63 ms and therefore we wait for 80 ms.
> + */
> + msleep(80);
Wow.
> +
> + ret = imx415_read(sensor, IMX415_SENSOR_INFO);
> + if (ret < 0) {
> + dev_err_probe(sensor->dev, ret,
> + "failed to read sensor information\n");
> + goto done;
> + }
> +
> + model = ret & IMX415_SENSOR_INFO_MASK;
> +
> + switch (model) {
> + case IMX415_CHIP_ID:
> + dev_info(sensor->dev, "Detected IMX415 image sensor\n");
> + break;
> + default:
> + ret = dev_err_probe(sensor->dev, -ENODEV,
> + "invalid device model 0x%04x\n", model);
> + goto done;
> + }
> +
> +done:
> + imx415_write(sensor, IMX415_MODE, IMX415_MODE_STANDBY);
> + return ret;
> +}
> +
> +static int imx415_check_inck(unsigned long inck, u64 link_frequency)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(imx415_clk_params); ++i) {
> + if ((imx415_clk_params[i].lane_rate == link_frequency * 2) &&
> + imx415_clk_params[i].inck == inck)
> + break;
> + }
> +
> + if (i == ARRAY_SIZE(imx415_clk_params))
> + return -EINVAL;
> + else
> + return 0;
> +}
> +
> +static int imx415_parse_hw_config(struct imx415 *sensor)
> +{
> + struct v4l2_fwnode_endpoint bus_cfg = {
> + .bus_type = V4L2_MBUS_CSI2_DPHY,
> + };
> + struct fwnode_handle *ep;
> + u64 lane_rate;
> + unsigned long inck;
> + unsigned int i, j;
> + int ret;
> +
> + for (i = 0; i < ARRAY_SIZE(sensor->supplies); ++i)
> + sensor->supplies[i].supply = imx415_supply_names[i];
> +
> + ret = devm_regulator_bulk_get(sensor->dev, ARRAY_SIZE(sensor->supplies),
> + sensor->supplies);
> + if (ret)
> + return dev_err_probe(sensor->dev, ret,
> + "failed to get supplies\n");
> +
> + sensor->reset = devm_gpiod_get_optional(sensor->dev, "reset",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(sensor->reset))
> + return dev_err_probe(sensor->dev, PTR_ERR(sensor->reset),
> + "failed to get reset GPIO\n");
> +
> + sensor->clk = devm_clk_get(sensor->dev, "inck");
> + if (IS_ERR(sensor->clk))
> + return dev_err_probe(sensor->dev, PTR_ERR(sensor->clk),
> + "failed to get clock\n");
> +
> + ep = fwnode_graph_get_next_endpoint(dev_fwnode(sensor->dev), NULL);
> + if (!ep)
> + return -ENXIO;
> +
> + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> + fwnode_handle_put(ep);
> + if (ret)
> + return ret;
> +
> + switch (bus_cfg.bus.mipi_csi2.num_data_lanes) {
> + case 2:
> + case 4:
> + sensor->num_data_lanes = bus_cfg.bus.mipi_csi2.num_data_lanes;
> + break;
> + default:
> + ret = dev_err_probe(sensor->dev, -EINVAL,
> + "invalid number of CSI2 data lanes %d\n",
> + bus_cfg.bus.mipi_csi2.num_data_lanes);
> + goto done_endpoint_free;
> + }
> +
> + if (!bus_cfg.nr_of_link_frequencies) {
> + ret = dev_err_probe(sensor->dev, -EINVAL,
> + "no link frequencies defined");
> + goto done_endpoint_free;
> + }
> +
> + /*
> + * Check if there exists a sensor mode defined for current INCK,
> + * number of lanes and given lane rates.
> + */
> + inck = clk_get_rate(sensor->clk);
> + for (i = 0; i < bus_cfg.nr_of_link_frequencies; ++i) {
> + if (imx415_check_inck(inck, bus_cfg.link_frequencies[i])) {
> + dev_err(sensor->dev,
dev_dbg() perhaps?
> + "INCK %lu Hz not supported for this link freq",
> + inck);
> + continue;
> + }
> +
> + for (j = 0; j < ARRAY_SIZE(supported_modes); ++j) {
> + if (sensor->num_data_lanes != supported_modes[j].lanes)
> + continue;
> + if (bus_cfg.link_frequencies[i] * 2 !=
> + supported_modes[j].lane_rate)
> + continue;
> + sensor->cur_mode = j;
> + goto found_mode;
You can use break here if you add sensor->cur_mode check for the loop. Or
remove the condition below.
> + }
> + }
> + if (i == bus_cfg.nr_of_link_frequencies) {
> + ret = dev_err_probe(sensor->dev, -EINVAL,
> + "no valid sensor mode defined\n");
> + goto done_endpoint_free;
> + }
> +
> +found_mode:
> + lane_rate = supported_modes[sensor->cur_mode].lane_rate;
> + for (i = 0; i < ARRAY_SIZE(imx415_clk_params); ++i) {
> + if (lane_rate == imx415_clk_params[i].lane_rate &&
> + inck == imx415_clk_params[i].inck) {
> + sensor->clk_params = &imx415_clk_params[i];
> + break;
> + }
> + }
> + if (i == ARRAY_SIZE(imx415_clk_params)) {
> + ret = dev_err_probe(sensor->dev, -EINVAL,
> + "Mode %d not supported\n",
> + sensor->cur_mode);
> + goto done_endpoint_free;
> + }
> +
> + dev_dbg(sensor->dev, "clock: %lu Hz, lane_rate: %llu bps, lanes: %d\n",
> + inck, lane_rate, sensor->num_data_lanes);
> +
> +done_endpoint_free:
> + v4l2_fwnode_endpoint_free(&bus_cfg);
> +
> + return ret;
> +}
> +
> +static int imx415_probe(struct i2c_client *client)
> +{
> + struct imx415 *sensor;
> + int ret;
> +
> + sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL);
> + if (!sensor)
> + return -ENOMEM;
> +
> + sensor->dev = &client->dev;
> +
> + ret = imx415_parse_hw_config(sensor);
> + if (ret)
> + return ret;
> +
> + sensor->regmap = devm_regmap_init_i2c(client, &imx415_regmap_config);
> + if (IS_ERR(sensor->regmap))
> + return PTR_ERR(sensor->regmap);
> +
> + /*
> + * Enable power management. The driver supports runtime PM, but needs to
> + * work when runtime PM is disabled in the kernel. To that end, power
> + * the sensor on manually here, identify it, and fully initialize it.
> + */
> + ret = imx415_power_on(sensor);
> + if (ret < 0)
> + return ret;
> +
> + ret = imx415_identify_model(sensor);
> + if (ret < 0)
> + goto err_power;
> +
> + ret = imx415_subdev_init(sensor);
> + if (ret < 0)
> + goto err_power;
> +
> + /*
> + * Enable runtime PM. As the device has been powered manually, mark it
> + * as active, and increase the usage count without resuming the device.
> + */
> + pm_runtime_set_active(sensor->dev);
> + pm_runtime_get_noresume(sensor->dev);
> + pm_runtime_enable(sensor->dev);
> +
> + ret = v4l2_async_register_subdev_sensor(&sensor->subdev);
> + if (ret < 0)
> + goto err_pm;
> +
> + /*
> + * Finally, enable autosuspend and decrease the usage count. The device
> + * will get suspended after the autosuspend delay, turning the power
> + * off.
> + */
> + pm_runtime_set_autosuspend_delay(sensor->dev, 1000);
> + pm_runtime_use_autosuspend(sensor->dev);
> + pm_runtime_put_autosuspend(sensor->dev);
> +
> + return 0;
> +
> +err_pm:
> + pm_runtime_disable(sensor->dev);
> + pm_runtime_put_noidle(sensor->dev);
> + imx415_subdev_cleanup(sensor);
> +err_power:
> + imx415_power_off(sensor);
> + return ret;
> +}
> +
> +static void imx415_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> + struct imx415 *sensor = to_imx415(subdev);
> +
> + v4l2_async_unregister_subdev(subdev);
> +
> + imx415_subdev_cleanup(sensor);
> +
> + /*
> + * Disable runtime PM. In case runtime PM is disabled in the kernel,
> + * make sure to turn power off manually.
> + */
> + pm_runtime_disable(sensor->dev);
> + if (!pm_runtime_status_suspended(sensor->dev))
> + imx415_power_off(sensor);
> + pm_runtime_set_suspended(sensor->dev);
> +}
> +
> +static int imx415_runtime_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> + struct imx415 *sensor = to_imx415(subdev);
> +
> + return imx415_power_on(sensor);
> +}
> +
> +static int imx415_runtime_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> + struct imx415 *sensor = to_imx415(subdev);
> +
> + imx415_power_off(sensor);
> +
> + return 0;
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(imx415_pm_ops, imx415_runtime_suspend,
> + imx415_runtime_resume, NULL);
> +
> +static const struct of_device_id imx415_of_match[] = {
> + { .compatible = "sony,imx415" },
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, imx415_of_match);
> +
> +static struct i2c_driver imx415_driver = {
> + .probe_new = imx415_probe,
> + .remove = imx415_remove,
> + .driver = {
> + .name = "imx415",
> + .of_match_table = imx415_of_match,
> + .pm = pm_ptr(&imx415_pm_ops),
> + },
> +};
> +
> +module_i2c_driver(imx415_driver);
> +
> +MODULE_DESCRIPTION("Sony IMX415 image sensor driver");
> +MODULE_AUTHOR("Gerald Loacker <gerald.loacker@...fvision.net>");
> +MODULE_AUTHOR("Michael Riesch <michael.riesch@...fvision.net>");
> +MODULE_LICENSE("GPL");
--
Kind regards,
Sakari Ailus
Powered by blists - more mailing lists