| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Y9LnWfZb+v17+h+X@pendragon.ideasonboard.com>
Date: Thu, 26 Jan 2023 22:49:29 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: yuji2.ishikawa@...hiba.co.jp
Cc: hverkuil@...all.nl, mchehab@...nel.org,
nobuhiro1.iwamatsu@...hiba.co.jp, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, rafael.j.wysocki@...el.com,
broonie@...nel.org, linux-media@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v5 3/6] media: platform: visconti: Add Toshiba Visconti
Video Input Interface driver user interace
Hello Ishikawa-san,
On Wed, Jan 25, 2023 at 10:20:27AM +0000, yuji2.ishikawa@...hiba.co.jp wrote:
> On Wednesday, January 18, 2023 10:04 AM, Laurent Pinchart wrote:
> > On Tue, Jan 17, 2023 at 12:47:10PM +0100, Hans Verkuil wrote:
> > > On 11/01/2023 03:24, Yuji Ishikawa wrote:
> > > > Add support to Video Input Interface on Toshiba Visconti ARM SoCs.
> > > > The interface device includes CSI2 Receiver, frame grabber, video
> > > > DMAC and image signal processor.
> > > > This patch provides the user interface layer.
> > > >
> > > > A driver instance provides three /dev/videoX device files; one for
> > > > RGB image capture, another one for optional RGB capture with
> > > > different parameters and the last one for RAW capture.
> > > >
> > > > Through the device files, the driver provides streaming (DMA-BUF) interface.
> > > > A userland application should feed DMA-BUF instances for capture buffers.
> > > >
> > > > The driver is based on media controller framework.
> > > > Its operations are roughly mapped to two subdrivers; one for ISP and
> > > > CSI2 receiver (yields 1 instance), the other for capture (yields 3
> > > > instances for each capture mode).
> > > >
> > > > Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@...hiba.co.jp>
> > > > ---
> > > > Changelog v2:
> > > > - Resend v1 because a patch exceeds size limit.
> > > >
> > > > Changelog v3:
> > > > - Adapted to media control framework
> > > > - Introduced ISP subdevice, capture device
> > > > - Remove private IOCTLs and add vendor specific V4L2 controls
> > > > - Change function name avoiding camelcase and uppercase letters
> > > >
> > > > Changelog v4:
> > > > - Split patches because the v3 patch exceeds size limit
> > > > - Stop using ID number to identify driver instance:
> > > > - Use dynamically allocated structure to hold HW specific context,
> > > > instead of static one.
> > > > - Call HW layer functions with the context structure instead of ID
> > > > number
> > > > - Use pm_runtime to trigger initialization of HW
> > > > along with open/close of device files.
> > > >
> > > > Changelog v5:
> > > > - Fix coding style problems in viif.c
> > > > ---
> > > > drivers/media/platform/visconti/Makefile | 1 +
> > > > drivers/media/platform/visconti/viif.c | 545 ++++++++
> > > > drivers/media/platform/visconti/viif.h | 203 +++
> > > > .../media/platform/visconti/viif_capture.c | 1201 +++++++++++++++++
> > > > drivers/media/platform/visconti/viif_isp.c | 846 ++++++++++++
> > > > 5 files changed, 2796 insertions(+) create mode 100644
> > > > drivers/media/platform/visconti/viif.c
> > > > create mode 100644 drivers/media/platform/visconti/viif.h
> > > > create mode 100644 drivers/media/platform/visconti/viif_capture.c
> > > > create mode 100644 drivers/media/platform/visconti/viif_isp.c
> >
> > [snip]
> >
> > > > +static int viif_s_edid(struct file *file, void *fh, struct
> > > > +v4l2_edid *edid) {
> > > > + struct viif_device *viif_dev = video_drvdata_to_capdev(file)->viif_dev;
> > > > + struct viif_subdev *viif_sd = viif_dev->sd;
> > > > +
> > > > + return v4l2_subdev_call(viif_sd->v4l2_sd, pad, set_edid, edid); }
> > >
> > > Has this driver been tested with an HDMI receiver? If not, then I
> > > would recommend dropping support for it until you actually can
> > > test with such hardware.
> > >
> > > The DV_TIMINGS API is for HDMI/DVI/DisplayPort etc. interfaces, it's
> > > not meant for CSI and similar interfaces.
> >
> > More than that, for MC-based drivers, the video node should *never* forward
> > ioctls to a connected subdev. The *only* valid calls to
> > v4l2_subdev_call() in this file are
> >
> > - to video.s_stream() in the start and stop streaming handler
> >
> > - to pad.g_fmt() when starting streaming to validate that the connected
> > subdev outputs a format compatible with the format set on the video
> > capture device
> >
> > That's it, nothing else, all other calls to v4l2_subdev_call() must be dropped from
> > the implementation of the video_device.
>
> Thank you for your comment. I understand the restriction.
> I'll remove following functions corresponding to ioctls.
>
> * viif_enum_input
> * viif_g_selection
> * viif_s_selection
> * viif_dv_timings_cap
> * viif_enum_dv_timings
> * viif_g_dv_timings
> * viif_s_dv_timings
> * viif_query_dv_timings
> * viif_g_edid
> * viif_s_edid
> * viif_g_parm
> * viif_s_parm
> * viif_enum_framesizes
This one should stay, it should report the minimum and maximum sizes
supported by the video nodes, regardless of the configuration of the
connected subdev.
> * viif_enum_frameintervals
>
> I can call subdevices directly if I need. Is it a correct understanding?
what do you mean exactly by calling subdevices directly ?
> As for viif_try_fmt_vid_cap and viif_s_fmt_vid_cap,
> I'll remove pad.g_fmt() call which is for checking pixel format.
> The check will be moved to viif_capture_link_validate() validation
> routine triggered by a start streaming event.
>
> > [snip]
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists