| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230126110833.264439-1-marcel@ziswiler.com>
Date: Thu, 26 Jan 2023 12:08:23 +0100
From: Marcel Ziswiler <marcel@...wiler.com>
To: devicetree@...r.kernel.org
Cc: linux-imx@....com, Liu Ying <victor.liu@....com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Abel Vesa <abelvesa@...nel.org>,
Clark Wang <xiaoning.wang@....com>,
Denys Drozdov <denys.drozdov@...adex.com>,
Fabio Estevam <festevam@...x.de>,
Fabio Estevam <festevam@...il.com>,
Frank Li <Frank.Li@....com>,
Frieder Schrempf <frieder.schrempf@...tron.de>,
Joakim Zhang <qiangqing.zhang@....com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Li Yang <leoyang.li@....com>, Marek Vasut <marex@...x.de>,
Matthias Schiffer <matthias.schiffer@...group.com>,
Max Krummenacher <max.krummenacher@...adex.com>,
Ming Qian <ming.qian@....com>,
Oliver Graute <oliver.graute@...oconnector.com>,
Peng Fan <peng.fan@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Philippe Schenker <philippe.schenker@...adex.com>,
Pierre Gondois <pierre.gondois@....com>,
Reinhold Mueller <reinhold.mueller@...rion.com>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Shijie Qin <shijie.qin@....com>,
Tim Harvey <tharvey@...eworks.com>,
Viorel Suman <viorel.suman@....com>,
Zhou Peng <eagle.zhou@....com>
Subject: [PATCH v5 00/10] arm64: dts: freescale: prepare and add apalis imx8 support
From: Marcel Ziswiler <marcel.ziswiler@...adex.com>
Add support for lsio_pwm0-3, add io-channel-cells property for ADC
nodes, set lpspi0 max frequency to 60MHz, add missed LVDS lpi2c and PWM
power domains, add flexcan in adma, add can node in devicetree, add vpu
decoder and encoder, add toradex,apalis-imx8 et al. to dt-bindings and
finally, add initial support for Apalis iMX8 split into module and
carrier board parts.
Changes in v5:
- Update subject prefix as pointed out by Krzysztof. Thanks!
- Remove LVDS PWM support waiting for Liu's patches to land first.
- Remove bkl1_pwm functionality depending on the above.
- Squashing all Apalis iMX8 specific device tree patches. As outlined by
Krzysztof reviewers may simply use b4 diff.
Changes in v4:
- New patch inspired by the following downstream patch:
commit 0c36c5b63c1e ("LF-3569-1 firmware: imx: scu-pd: add missed lvds lpi2c and pwm power domains")
Avoiding the following being reported upon boot:
[ 1.309776] lvds0_pwm0_clk: failed to attached the power domain -2
[ 1.334097] lvds1_pwm0_clk: failed to attached the power domain -2
...
[ 15.281767] platform 57244000.pwm: deferred probe pending
...
[ 15.292630] platform backlight: deferred probe pending
- New patch combining the following downstream patches:
commit e8fe3f57223a ("arm64: dts: imx8qxp: add FlexCAN in adma")
commit 4e90361f1ed3 ("arm64: dts: imx8qxp: add multi-pd support for CAN1/2")
commit 899f516e61f8 ("arm64: dts: imx8: dma: fully switched to new clk binding")
commit 8a28ca15a058 ("arm64: dts: imx8qxp: drop multi-pd for CAN device")
commit c493402197dd ("arm64: dts: imx8: update CAN fsl,clk-source and fsl,scu-index property")
- New patch inspired by the following downstream patch:
commit 117607e6a7b5 ("arm64: dts: imx8qm: add CAN node in devicetree")
- New patch combining the following downstream patches:
commit 4f2147ce6f0e ("arm64: dts: imx8qm: add vpu decoder and encoder")
commit 0c9f9b64d27d ("LF-6575: imx8q: vpu: switch to amphion upstream driver")
- Shorten subject.
Changes in v3:
- Fix subject as pointed out by Shawn. Thanks!
- Properly accommodate for -v1.1 modules curtsey Francesco.
- Only use V1.1 compatible for V1.1 module dtsi.
- Split patch into separate module and carrier boards parts as suggested
by Shawn.
- Put reg after compatible as requested by Shawn.
- Move atmel_mxt_ts and rtc_i2c into module dtsi to save such
duplications as suggested by Shawn.
- Change iomuxc pinctrl indent style as suggested by Shawn.
- Change led node names to the preferred first form as suggested by
Shawn. While at it also add color (yikes), default-state and function
properties and remove the deprecated label property.
- Put enable-active-high properties after the gpio ones as suggested by
Shawn. Thanks!
- Remove adc node's vref-supply and accompanying reg_vref_1v8 regulator
node.
- Rename gpio-hogs adherring to dt schema naming convention.
Changes in v2:
- Fixed missing space in the comment V1.1Module curtsey Max.
- Added Rob's ack.
Clark Wang (1):
firmware: imx: scu-pd: add missed lvds lpi2c and pwm power domains
Joakim Zhang (2):
arm64: dts: imx8qxp: add flexcan in adma
arm64: dts: imx8qm: add can node in devicetree
Marcel Ziswiler (3):
dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
arm64: dts: freescale: add initial apalis imx8 aka quadmax module
support
arm64: dts: freescale: add apalis imx8 aka quadmax carrier board
support
Max Krummenacher (1):
arm64: dts: imx8-ss-dma: add io-channel-cells to adc nodes
Philippe Schenker (2):
arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3
arm64: dts: freescale: imx8-ss-dma: set lpspi0 max frequency to 60mhz
Zhou Peng (1):
arm64: dts: imx8qm: add vpu decoder and encoder
.../devicetree/bindings/arm/fsl.yaml | 19 +
arch/arm64/boot/dts/freescale/Makefile | 5 +
.../boot/dts/freescale/imx8-apalis-eval.dtsi | 144 ++
.../dts/freescale/imx8-apalis-ixora-v1.1.dtsi | 220 +++
.../dts/freescale/imx8-apalis-ixora-v1.2.dtsi | 270 +++
.../boot/dts/freescale/imx8-apalis-v1.1.dtsi | 1486 +++++++++++++++++
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 76 +-
.../boot/dts/freescale/imx8-ss-lsio.dtsi | 48 +
.../boot/dts/freescale/imx8qm-apalis-eval.dts | 16 +
.../freescale/imx8qm-apalis-ixora-v1.1.dts | 16 +
.../dts/freescale/imx8qm-apalis-v1.1-eval.dts | 16 +
.../imx8qm-apalis-v1.1-ixora-v1.1.dts | 16 +
.../imx8qm-apalis-v1.1-ixora-v1.2.dts | 16 +
.../dts/freescale/imx8qm-apalis-v1.1.dtsi | 16 +
.../boot/dts/freescale/imx8qm-apalis.dtsi | 340 ++++
.../boot/dts/freescale/imx8qm-ss-dma.dtsi | 44 +
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 4 +
drivers/firmware/imx/scu-pd.c | 4 +
18 files changed, 2755 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
--
2.36.1
Powered by blists - more mailing lists