[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230126124651.1362533-5-abel.vesa@linaro.org>
Date: Thu, 26 Jan 2023 14:46:47 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
"vkoul@...nel.org" <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-phy@...ts.infradead.org
Subject: [PATCH v2 4/8] phy: qcom-qmp: pcs-usb: Add v6 register offsets
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB.
Add the new PCS USB specific offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
The v1 version of this patch was here:
https://lore.kernel.org/all/20221116120157.2706810-2-abel.vesa@linaro.org/
Changes since v1:
* split all the offsets into separate patches, like Vinod suggested
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1 +
.../phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 31 +++++++++++++++++++
2 files changed, 32 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 521ea3ce6b83..14d12d198d87 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -26,6 +26,7 @@
#include "phy-qcom-qmp-pcs-misc-v3.h"
#include "phy-qcom-qmp-pcs-usb-v4.h"
#include "phy-qcom-qmp-pcs-usb-v5.h"
+#include "phy-qcom-qmp-pcs-usb-v6.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
new file mode 100644
index 000000000000..9510e63ba9d8
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_USB_V6_H_
+#define QCOM_PHY_QMP_PCS_USB_V6_H_
+
+/* Only for QMP V6 PHY - USB3 have different offsets than V5 */
+#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG1 0xc4
+#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG2 0xc8
+#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3 0xcc
+#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6 0xd8
+#define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1 0xdc
+#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x90
+#define QPHY_USB_V6_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190
+#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
+#define QPHY_USB_V6_PCS_CDR_RESET_TIME 0x1b0
+#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG1 0x1c0
+#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG2 0x1c4
+#define QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG 0x1d0
+#define QPHY_USB_V6_PCS_EQ_CONFIG1 0x1dc
+#define QPHY_USB_V6_PCS_EQ_CONFIG5 0x1ec
+
+#define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18
+#define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c
+#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40
+#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x44
+
+#endif
--
2.34.1
Powered by blists - more mailing lists