| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230126132120.1661-3-masahisa.kojima@linaro.org>
Date: Thu, 26 Jan 2023 22:21:19 +0900
From: Masahisa Kojima <masahisa.kojima@...aro.org>
To: Ard Biesheuvel <ardb@...nel.org>,
Jens Wiklander <jens.wiklander@...aro.org>,
linux-kernel@...r.kernel.org, op-tee@...ts.trustedfirmware.org
Cc: Ilias Apalodimas <ilias.apalodimas@...aro.org>,
Johan Hovold <johan+linaro@...nel.org>,
Masahisa Kojima <masahisa.kojima@...aro.org>,
Sumit Garg <sumit.garg@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-efi@...r.kernel.org
Subject: [RFC PATCH 2/2] tee: Add op-tee helper functions for variable access
When the flash is not owned by the non-secure world, accessing the EFI
variables is straightforward and done via EFI Runtime Variable Services.
In this case, critical variables for system integrity and security
are normally stored in the dedicated secure storage and only accessible
from the secure world.
On the other hand, the small embedded devices don't have the special
dedicated secure storage. The eMMC device with an RPMB partition is
becoming more common, we can use an RPMB partition to store the
EFI Variables.
The eMMC device is typically owned by the non-secure world(linux in
this case). There is an existing solution utilizing eMMC RPMB partition
for EFI Variables, it is implemented by interacting with
OP-TEE, StandaloneMM(as EFI Variable Service Pseudo TA), eMMC driver
and tee-supplicant. The last piece is the tee-based variable access
driver to interact with OP-TEE and StandaloneMM.
So let's add the kernel functions needed.
This feature is implemented as a kernel module.
StMM PTA has TA_FLAG_DEVICE_ENUM_SUPP flag when registered to OP-TEE
so that this optee_stmm_efi module is probed after tee-supplicant starts,
since "SetVariable" EFI Runtime Variable Service requires to
interact with tee-supplicant.
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@...aro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@...aro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@...aro.org>
---
drivers/tee/optee/Kconfig | 10 +
drivers/tee/optee/Makefile | 1 +
drivers/tee/optee/mm_communication.h | 249 +++++++++++
drivers/tee/optee/optee_private.h | 5 +-
drivers/tee/optee/optee_stmm_efi.c | 598 +++++++++++++++++++++++++++
drivers/tee/tee_core.c | 23 ++
include/linux/efi.h | 1 +
include/linux/tee_drv.h | 23 ++
8 files changed, 909 insertions(+), 1 deletion(-)
create mode 100644 drivers/tee/optee/mm_communication.h
create mode 100644 drivers/tee/optee/optee_stmm_efi.c
diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig
index f121c224e682..a0b699977e51 100644
--- a/drivers/tee/optee/Kconfig
+++ b/drivers/tee/optee/Kconfig
@@ -7,3 +7,13 @@ config OPTEE
help
This implements the OP-TEE Trusted Execution Environment (TEE)
driver.
+
+config EFI_STMM_OPTEE
+ tristate "OP-TEE based EFI runtime variable service driver"
+ depends on OPTEE
+ help
+ This driver provides support for OP-TEE based EFI runtime
+ variable service driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called optee_stmm_efi.
diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
index a6eff388d300..9acb0b2de8fe 100644
--- a/drivers/tee/optee/Makefile
+++ b/drivers/tee/optee/Makefile
@@ -8,6 +8,7 @@ optee-objs += supp.o
optee-objs += device.o
optee-objs += smc_abi.o
optee-objs += ffa_abi.o
+obj-$(CONFIG_EFI_STMM_OPTEE) += optee_stmm_efi.o
# for tracing framework to find optee_trace.h
CFLAGS_smc_abi.o := -I$(src)
diff --git a/drivers/tee/optee/mm_communication.h b/drivers/tee/optee/mm_communication.h
new file mode 100644
index 000000000000..23e6672991ef
--- /dev/null
+++ b/drivers/tee/optee/mm_communication.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Headers for EFI variable service via StandAloneMM, EDK2 application running
+ * in OP-TEE
+ *
+ * Copyright (c) 2017, Intel Corporation. All rights reserved.
+ * Copyright (C) 2020 Linaro Ltd.
+ */
+
+#ifndef _MM_COMMUNICATION_H_
+#define _MM_COMMUNICATION_H_
+
+/*
+ * Interface to the pseudo Trusted Application (TA), which provides a
+ * communication channel with the Standalone MM (Management Mode)
+ * Secure Partition running at Secure-EL0
+ */
+
+#define PTA_STMM_CMDID_COMMUNICATE 0
+
+/* OP-TEE is using big endian GUIDs while UEFI uses little endian ones */
+#define PTA_STMM_UUID \
+ UUID_INIT(0xed32d533, 0x99e6, 0x4209, \
+ 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7)
+
+#define EFI_MM_VARIABLE_GUID \
+ EFI_GUID(0xed32d533, 0x99e6, 0x4209, \
+ 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7)
+
+/* Defined in EDK2 MdePkg/Include/Protocol/MmCommunication.h */
+
+/**
+ * struct efi_mm_communicate_header - Header used for SMM variable communication
+
+ * @header_guid: header use for disambiguation of content
+ * @message_len: length of the message. Does not include the size of the
+ * header
+ * @data: payload of the message
+ *
+ * Defined in EDK2 as EFI_MM_COMMUNICATE_HEADER.
+ * To avoid confusion in interpreting frames, the communication buffer should
+ * always begin with efi_mm_communicate_header.
+ */
+struct efi_mm_communicate_header {
+ efi_guid_t header_guid;
+ size_t message_len;
+ u8 data[];
+} __packed;
+
+#define MM_COMMUNICATE_HEADER_SIZE \
+ (sizeof(struct efi_mm_communicate_header))
+
+/* Defined in EDK2 ArmPkg/Include/IndustryStandard/ArmMmSvc.h */
+
+/* SPM return error codes */
+#define ARM_SVC_SPM_RET_SUCCESS 0
+#define ARM_SVC_SPM_RET_NOT_SUPPORTED -1
+#define ARM_SVC_SPM_RET_INVALID_PARAMS -2
+#define ARM_SVC_SPM_RET_DENIED -3
+#define ARM_SVC_SPM_RET_NO_MEMORY -5
+
+/* Defined in EDK2 MdeModulePkg/Include/Guid/SmmVariableCommon.h */
+
+#define SMM_VARIABLE_FUNCTION_GET_VARIABLE 1
+/*
+ * The payload for this function is
+ * SMM_VARIABLE_COMMUNICATE_GET_NEXT_VARIABLE_NAME.
+ */
+#define SMM_VARIABLE_FUNCTION_GET_NEXT_VARIABLE_NAME 2
+/*
+ * The payload for this function is SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE.
+ */
+#define SMM_VARIABLE_FUNCTION_SET_VARIABLE 3
+/*
+ * The payload for this function is
+ * SMM_VARIABLE_COMMUNICATE_QUERY_VARIABLE_INFO.
+ */
+#define SMM_VARIABLE_FUNCTION_QUERY_VARIABLE_INFO 4
+/*
+ * It is a notify event, no extra payload for this function.
+ */
+#define SMM_VARIABLE_FUNCTION_READY_TO_BOOT 5
+/*
+ * It is a notify event, no extra payload for this function.
+ */
+#define SMM_VARIABLE_FUNCTION_EXIT_BOOT_SERVICE 6
+/*
+ * The payload for this function is VARIABLE_INFO_ENTRY.
+ * The GUID in EFI_SMM_COMMUNICATE_HEADER is gEfiSmmVariableProtocolGuid.
+ */
+#define SMM_VARIABLE_FUNCTION_GET_STATISTICS 7
+/*
+ * The payload for this function is SMM_VARIABLE_COMMUNICATE_LOCK_VARIABLE
+ */
+#define SMM_VARIABLE_FUNCTION_LOCK_VARIABLE 8
+
+#define SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_SET 9
+
+#define SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_GET 10
+
+#define SMM_VARIABLE_FUNCTION_GET_PAYLOAD_SIZE 11
+/*
+ * The payload for this function is
+ * SMM_VARIABLE_COMMUNICATE_RUNTIME_VARIABLE_CACHE_CONTEXT
+ */
+#define SMM_VARIABLE_FUNCTION_INIT_RUNTIME_VARIABLE_CACHE_CONTEXT 12
+
+#define SMM_VARIABLE_FUNCTION_SYNC_RUNTIME_CACHE 13
+/*
+ * The payload for this function is
+ * SMM_VARIABLE_COMMUNICATE_GET_RUNTIME_CACHE_INFO
+ */
+#define SMM_VARIABLE_FUNCTION_GET_RUNTIME_CACHE_INFO 14
+
+/**
+ * struct smm_variable_communicate_header - Used for SMM variable communication
+
+ * @function: function to call in Smm.
+ * @ret_status: return status
+ * @data: payload
+ *
+ * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_HEADER.
+ */
+struct smm_variable_communicate_header {
+ size_t function;
+ efi_status_t ret_status;
+ u8 data[];
+};
+
+#define MM_VARIABLE_COMMUNICATE_SIZE \
+ (sizeof(struct smm_variable_communicate_header))
+
+/**
+ * struct smm_variable_access - Used to communicate with StMM by
+ * SetVariable and GetVariable.
+
+ * @guid: vendor GUID
+ * @data_size: size of EFI variable data
+ * @name_size: size of EFI name
+ * @attr: attributes
+ * @name: variable name
+ *
+ * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE.
+ *
+ */
+struct smm_variable_access {
+ efi_guid_t guid;
+ size_t data_size;
+ size_t name_size;
+ u32 attr;
+ u16 name[];
+};
+
+#define MM_VARIABLE_ACCESS_HEADER_SIZE \
+ (sizeof(struct smm_variable_access))
+/**
+ * struct smm_variable_payload_size - Used to get the max allowed
+ * payload used in StMM.
+ *
+ * @size: size to fill in
+ *
+ * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_GET_PAYLOAD_SIZE.
+ *
+ */
+struct smm_variable_payload_size {
+ size_t size;
+};
+
+/**
+ * struct smm_variable_getnext - Used to communicate with StMM for
+ * GetNextVariableName.
+ *
+ * @guid: vendor GUID
+ * @name_size: size of the name of the variable
+ * @name: variable name
+ *
+ * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_GET_NEXT_VARIABLE_NAME.
+ */
+struct smm_variable_getnext {
+ efi_guid_t guid;
+ size_t name_size;
+ u16 name[];
+};
+
+#define MM_VARIABLE_GET_NEXT_HEADER_SIZE \
+ (sizeof(struct smm_variable_getnext))
+
+/**
+ * struct smm_variable_query_info - Used to communicate with StMM for
+ * QueryVariableInfo.
+ *
+ * @max_variable_storage: max available storage
+ * @remaining_variable_storage: remaining available storage
+ * @max_variable_size: max variable supported size
+ * @attr: attributes to query storage for
+ *
+ * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_QUERY_VARIABLE_INFO.
+ */
+struct smm_variable_query_info {
+ u64 max_variable_storage;
+ u64 remaining_variable_storage;
+ u64 max_variable_size;
+ u32 attr;
+};
+
+#define VAR_CHECK_VARIABLE_PROPERTY_REVISION 0x0001
+#define VAR_CHECK_VARIABLE_PROPERTY_READ_ONLY BIT(0)
+/**
+ * struct var_check_property - Used to store variable properties in StMM
+ *
+ * @revision: magic revision number for variable property checking
+ * @property: properties mask for the variable used in StMM.
+ * Currently RO flag is supported
+ * @attributes: variable attributes used in StMM checking when properties
+ * for a variable are enabled
+ * @minsize: minimum allowed size for variable payload checked against
+ * smm_variable_access->datasize in StMM
+ * @maxsize: maximum allowed size for variable payload checked against
+ * smm_variable_access->datasize in StMM
+ *
+ * Defined in EDK2 as VAR_CHECK_VARIABLE_PROPERTY.
+ */
+struct var_check_property {
+ u16 revision;
+ u16 property;
+ u32 attributes;
+ size_t minsize;
+ size_t maxsize;
+};
+
+/**
+ * struct smm_variable_var_check_property - Used to communicate variable
+ * properties with StMM
+ *
+ * @guid: vendor GUID
+ * @name_size: size of EFI name
+ * @property: variable properties struct
+ * @name: variable name
+ *
+ * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_VAR_CHECK_VARIABLE_PROPERTY.
+ */
+struct smm_variable_var_check_property {
+ efi_guid_t guid;
+ size_t name_size;
+ struct var_check_property property;
+ u16 name[];
+};
+
+#endif /* _MM_COMMUNICATION_H_ */
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index 04ae58892608..10af910e0dce 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -12,6 +12,7 @@
#include <linux/tee_drv.h>
#include <linux/types.h>
#include "optee_msg.h"
+#include "optee_private.h"
#define DRIVER_NAME "optee"
@@ -19,6 +20,7 @@
/* Some Global Platform error codes used in this driver */
#define TEEC_SUCCESS 0x00000000
+#define TEEC_ERROR_EXCESS_DATA 0xFFFF0004
#define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
#define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A
#define TEEC_ERROR_COMMUNICATION 0xFFFF000E
@@ -250,7 +252,6 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm,
int (*shm_unregister)(struct tee_context *ctx,
struct tee_shm *shm));
-
void optee_remove_common(struct optee *optee);
int optee_open(struct tee_context *ctx, bool cap_memref_null);
void optee_release(struct tee_context *ctx);
@@ -322,4 +323,6 @@ void optee_smc_abi_unregister(void);
int optee_ffa_abi_register(void);
void optee_ffa_abi_unregister(void);
+int optee_efivar_ops_init(struct tee_context *ctx);
+
#endif /*OPTEE_PRIVATE_H*/
diff --git a/drivers/tee/optee/optee_stmm_efi.c b/drivers/tee/optee/optee_stmm_efi.c
new file mode 100644
index 000000000000..6dcf1eb4b96c
--- /dev/null
+++ b/drivers/tee/optee/optee_stmm_efi.c
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * EFI variable service via OP-TEE
+ *
+ * Copyright (C) 2022 Linaro
+ */
+
+#include <linux/efi.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/tee.h>
+#include <linux/tee_drv.h>
+#include <linux/ucs2_string.h>
+#include "mm_communication.h"
+#include "optee_private.h"
+
+static struct efivars optee_efivars;
+static struct efivar_operations optee_ops;
+
+static size_t max_buffer_size; /* comm + var + func + data */
+static size_t max_payload_size; /* func + data */
+
+struct mm_connection {
+ struct tee_context *ctx;
+ u32 session;
+};
+
+/* UUID of the stmm PTA */
+static const struct tee_client_device_id optee_stmm_efi_id_table[] = {
+ {PTA_STMM_UUID},
+ {}
+};
+
+static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+ if (ver->impl_id == TEE_IMPL_ID_OPTEE)
+ return 1;
+ else
+ return 0;
+}
+
+/**
+ * get_connection() - Retrieve OP-TEE session for a specific UUID.
+ *
+ * @conn: session buffer to fill
+ * Return: status code
+ */
+static int get_connection(struct mm_connection *conn)
+{
+ struct tee_context *ctx = NULL;
+ struct tee_ioctl_open_session_arg arg;
+ int rc;
+
+ memset(&arg, 0, sizeof(arg));
+
+ /* Open context with OP-TEE driver */
+ ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
+ if (IS_ERR(ctx))
+ return -ENODEV;
+
+ export_uuid(arg.uuid, &optee_stmm_efi_id_table[0].uuid);
+ rc = tee_client_open_session(ctx, &arg, NULL);
+ if (!rc) {
+ conn->ctx = ctx;
+ conn->session = arg.session;
+ }
+
+ return rc;
+}
+
+/**
+ * optee_mm_communicate() - Pass a buffer to StandaloneMM running in OP-TEE
+ *
+ * @comm_buf: locally allocated communcation buffer
+ * @dsize: buffer size
+ * Return: status code
+ */
+static efi_status_t optee_mm_communicate(void *comm_buf, size_t dsize)
+{
+ size_t buf_size;
+ efi_status_t ret;
+ struct efi_mm_communicate_header *mm_hdr;
+ struct mm_connection conn = { NULL, 0 };
+ struct tee_ioctl_invoke_arg arg;
+ struct tee_param param[4];
+ struct tee_shm *shm = NULL;
+ int rc;
+
+ if (!comm_buf)
+ return EFI_INVALID_PARAMETER;
+
+ mm_hdr = (struct efi_mm_communicate_header *)comm_buf;
+ buf_size = mm_hdr->message_len + sizeof(efi_guid_t) + sizeof(size_t);
+
+ if (dsize != buf_size)
+ return EFI_INVALID_PARAMETER;
+
+ rc = get_connection(&conn);
+ if (rc) {
+ pr_err("Unable to open OP-TEE session (err=%d)\n", rc);
+ return EFI_UNSUPPORTED;
+ }
+
+ shm = tee_shm_register_kernel_buf(conn.ctx, comm_buf, buf_size);
+ if (IS_ERR(shm)) {
+ pr_err("Unable to register shared memory\n");
+ tee_client_close_session(conn.ctx, conn.session);
+ return EFI_UNSUPPORTED;
+ }
+
+ memset(&arg, 0, sizeof(arg));
+ arg.func = PTA_STMM_CMDID_COMMUNICATE;
+ arg.session = conn.session;
+ arg.num_params = 4;
+
+ memset(param, 0, sizeof(param));
+ param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
+ param[0].u.memref.size = buf_size;
+ param[0].u.memref.shm = shm;
+ param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
+ param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_NONE;
+ param[3].attr = TEE_IOCTL_PARAM_ATTR_TYPE_NONE;
+
+ rc = tee_client_invoke_func(conn.ctx, &arg, param);
+ tee_shm_free(shm);
+ /* even if close session fails the session will be invalidaded */
+ tee_client_close_session(conn.ctx, conn.session);
+ if (rc)
+ return EFI_DEVICE_ERROR;
+ if (arg.ret == TEEC_ERROR_EXCESS_DATA)
+ pr_err("Variable payload too large\n");
+ if (arg.ret != TEEC_SUCCESS)
+ return EFI_DEVICE_ERROR;
+
+ switch (param[1].u.value.a) {
+ case ARM_SVC_SPM_RET_SUCCESS:
+ ret = EFI_SUCCESS;
+ break;
+
+ case ARM_SVC_SPM_RET_INVALID_PARAMS:
+ ret = EFI_INVALID_PARAMETER;
+ break;
+
+ case ARM_SVC_SPM_RET_DENIED:
+ ret = EFI_ACCESS_DENIED;
+ break;
+
+ case ARM_SVC_SPM_RET_NO_MEMORY:
+ ret = EFI_OUT_OF_RESOURCES;
+ break;
+
+ default:
+ ret = EFI_ACCESS_DENIED;
+ }
+
+ return ret;
+}
+
+/**
+ * mm_communicate() - Adjust the cmonnucation buffer to StandAlonneMM and send
+ * it to OP-TEE
+ *
+ * @comm_buf: locally allocated communcation buffer
+ * @dsize: buffer size
+ * Return: status code
+ */
+static efi_status_t mm_communicate(u8 *comm_buf, size_t dsize)
+{
+ efi_status_t ret;
+ struct efi_mm_communicate_header *mm_hdr;
+ struct smm_variable_communicate_header *var_hdr;
+
+ dsize += MM_COMMUNICATE_HEADER_SIZE + MM_VARIABLE_COMMUNICATE_SIZE;
+ mm_hdr = (struct efi_mm_communicate_header *)comm_buf;
+ var_hdr = (struct smm_variable_communicate_header *)mm_hdr->data;
+
+ ret = optee_mm_communicate(comm_buf, dsize);
+ if (ret != EFI_SUCCESS) {
+ pr_err("%s failed!\n", __func__);
+ return ret;
+ }
+
+ return var_hdr->ret_status;
+}
+
+/**
+ * setup_mm_hdr() - Allocate a buffer for StandAloneMM and initialize the
+ * header data.
+ *
+ * @dptr: pointer address of the corresponding StandAloneMM
+ * function
+ * @payload_size: buffer size
+ * @func: standAloneMM function number
+ * @ret: EFI return code
+ * Return: buffer or NULL
+ */
+static u8 *setup_mm_hdr(void **dptr, size_t payload_size, size_t func,
+ efi_status_t *ret)
+{
+ const efi_guid_t mm_var_guid = EFI_MM_VARIABLE_GUID;
+ struct efi_mm_communicate_header *mm_hdr;
+ struct smm_variable_communicate_header *var_hdr;
+ u8 *comm_buf;
+
+ /* In the init function we initialize max_buffer_size with
+ * get_max_payload(). So skip the test if max_buffer_size is initialized
+ * StandAloneMM will perform similar checks and drop the buffer if it's
+ * too long
+ */
+ if (max_buffer_size &&
+ max_buffer_size < (MM_COMMUNICATE_HEADER_SIZE +
+ MM_VARIABLE_COMMUNICATE_SIZE + payload_size)) {
+ *ret = EFI_INVALID_PARAMETER;
+ return NULL;
+ }
+
+ comm_buf = kzalloc(MM_COMMUNICATE_HEADER_SIZE +
+ MM_VARIABLE_COMMUNICATE_SIZE + payload_size,
+ GFP_KERNEL);
+ if (!comm_buf) {
+ *ret = EFI_OUT_OF_RESOURCES;
+ return NULL;
+ }
+
+ mm_hdr = (struct efi_mm_communicate_header *)comm_buf;
+ memcpy(&mm_hdr->header_guid, &mm_var_guid, sizeof(mm_hdr->header_guid));
+ mm_hdr->message_len = MM_VARIABLE_COMMUNICATE_SIZE + payload_size;
+
+ var_hdr = (struct smm_variable_communicate_header *)mm_hdr->data;
+ var_hdr->function = func;
+ if (dptr)
+ *dptr = var_hdr->data;
+ *ret = EFI_SUCCESS;
+
+ return comm_buf;
+}
+
+/**
+ * get_max_payload() - Get variable payload size from StandAloneMM.
+ *
+ * @size: size of the variable in storage
+ * Return: status code
+ */
+static efi_status_t get_max_payload(size_t *size)
+{
+ struct smm_variable_payload_size *var_payload = NULL;
+ size_t payload_size;
+ u8 *comm_buf = NULL;
+ efi_status_t ret;
+
+ if (!size) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ payload_size = sizeof(*var_payload);
+ comm_buf = setup_mm_hdr((void **)&var_payload, payload_size,
+ SMM_VARIABLE_FUNCTION_GET_PAYLOAD_SIZE, &ret);
+ if (!comm_buf)
+ goto out;
+
+ ret = mm_communicate(comm_buf, payload_size);
+ if (ret != EFI_SUCCESS)
+ goto out;
+
+ /* Make sure the buffer is big enough for storing variables */
+ if (var_payload->size < MM_VARIABLE_ACCESS_HEADER_SIZE + 0x20) {
+ ret = EFI_DEVICE_ERROR;
+ goto out;
+ }
+ *size = var_payload->size;
+ /*
+ * There seems to be a bug in EDK2 miscalculating the boundaries and
+ * size checks, so deduct 2 more bytes to fulfill this requirement. Fix
+ * it up here to ensure backwards compatibility with older versions
+ * (cf. StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/EventHandle.c.
+ * sizeof (EFI_MM_COMMUNICATE_HEADER) instead the size minus the
+ * flexible array member).
+ *
+ * size is guaranteed to be > 2 due to checks on the beginning.
+ */
+ *size -= 2;
+out:
+ kfree(comm_buf);
+ return ret;
+}
+
+static efi_status_t get_property_int(u16 *name, size_t name_size,
+ const efi_guid_t *vendor,
+ struct var_check_property *var_property)
+{
+ struct smm_variable_var_check_property *smm_property;
+ size_t payload_size;
+ u8 *comm_buf = NULL;
+ efi_status_t ret;
+
+ memset(var_property, 0, sizeof(*var_property));
+ payload_size = sizeof(*smm_property) + name_size;
+ if (payload_size > max_payload_size) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+ comm_buf = setup_mm_hdr(
+ (void **)&smm_property, payload_size,
+ SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_GET, &ret);
+ if (!comm_buf)
+ goto out;
+
+ memcpy(&smm_property->guid, vendor, sizeof(smm_property->guid));
+ smm_property->name_size = name_size;
+ memcpy(smm_property->name, name, name_size);
+
+ ret = mm_communicate(comm_buf, payload_size);
+ /*
+ * Currently only R/O property is supported in StMM.
+ * Variables that are not set to R/O will not set the property in StMM
+ * and the call will return EFI_NOT_FOUND. We are setting the
+ * properties to 0x0 so checking against that is enough for the
+ * EFI_NOT_FOUND case.
+ */
+ if (ret == EFI_NOT_FOUND)
+ ret = EFI_SUCCESS;
+ if (ret != EFI_SUCCESS)
+ goto out;
+ memcpy(var_property, &smm_property->property, sizeof(*var_property));
+
+out:
+ kfree(comm_buf);
+ return ret;
+}
+
+static efi_status_t optee_get_variable(u16 *name, efi_guid_t *vendor,
+ u32 *attributes,
+ unsigned long *data_size, void *data)
+{
+ struct var_check_property var_property;
+ struct smm_variable_access *var_acc;
+ size_t payload_size;
+ size_t name_size;
+ size_t tmp_dsize;
+ u8 *comm_buf = NULL;
+ efi_status_t ret;
+
+ if (!name || !vendor || !data_size) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ name_size = (ucs2_strnlen(name, EFI_VAR_NAME_LEN) + 1) * sizeof(u16);
+ if (name_size > max_payload_size - MM_VARIABLE_ACCESS_HEADER_SIZE) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ /* Trim output buffer size */
+ tmp_dsize = *data_size;
+ if (name_size + tmp_dsize >
+ max_payload_size - MM_VARIABLE_ACCESS_HEADER_SIZE) {
+ tmp_dsize = max_payload_size - MM_VARIABLE_ACCESS_HEADER_SIZE -
+ name_size;
+ }
+
+ /* Get communication buffer and initialize header */
+ payload_size = MM_VARIABLE_ACCESS_HEADER_SIZE + name_size + tmp_dsize;
+ comm_buf = setup_mm_hdr((void **)&var_acc, payload_size,
+ SMM_VARIABLE_FUNCTION_GET_VARIABLE, &ret);
+ if (!comm_buf)
+ goto out;
+
+ /* Fill in contents */
+ memcpy(&var_acc->guid, vendor, sizeof(var_acc->guid));
+ var_acc->data_size = tmp_dsize;
+ var_acc->name_size = name_size;
+ var_acc->attr = attributes ? *attributes : 0;
+ memcpy(var_acc->name, name, name_size);
+
+ /* Communicate */
+ ret = mm_communicate(comm_buf, payload_size);
+ if (ret == EFI_SUCCESS || ret == EFI_BUFFER_TOO_SMALL)
+ /* Update with reported data size for trimmed case */
+ *data_size = var_acc->data_size;
+ if (ret != EFI_SUCCESS)
+ goto out;
+
+ ret = get_property_int(name, name_size, vendor, &var_property);
+ if (ret != EFI_SUCCESS)
+ goto out;
+
+ if (attributes)
+ *attributes = var_acc->attr;
+
+ if (data)
+ memcpy(data, (u8 *)var_acc->name + var_acc->name_size,
+ var_acc->data_size);
+ else
+ ret = EFI_INVALID_PARAMETER;
+
+out:
+ kfree(comm_buf);
+ return ret;
+}
+
+static efi_status_t optee_get_next_variable(unsigned long *name_size,
+ efi_char16_t *name,
+ efi_guid_t *guid)
+{
+ struct smm_variable_getnext *var_getnext;
+ size_t payload_size;
+ size_t out_name_size;
+ size_t in_name_size;
+ u8 *comm_buf = NULL;
+ efi_status_t ret;
+
+ if (!name_size || !name || !guid) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ out_name_size = *name_size;
+ in_name_size = (ucs2_strnlen(name, EFI_VAR_NAME_LEN) + 1) * sizeof(u16);
+
+ if (out_name_size < in_name_size) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ if (in_name_size >
+ max_payload_size - MM_VARIABLE_GET_NEXT_HEADER_SIZE) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ /* Trim output buffer size */
+ if (out_name_size > max_payload_size - MM_VARIABLE_GET_NEXT_HEADER_SIZE)
+ out_name_size =
+ max_payload_size - MM_VARIABLE_GET_NEXT_HEADER_SIZE;
+
+ payload_size = MM_VARIABLE_GET_NEXT_HEADER_SIZE + out_name_size;
+ comm_buf = setup_mm_hdr((void **)&var_getnext, payload_size,
+ SMM_VARIABLE_FUNCTION_GET_NEXT_VARIABLE_NAME,
+ &ret);
+ if (!comm_buf)
+ goto out;
+
+ /* Fill in contents */
+ memcpy(&var_getnext->guid, guid, sizeof(var_getnext->guid));
+ var_getnext->name_size = out_name_size;
+ memcpy(var_getnext->name, name, in_name_size);
+ memset((u8 *)var_getnext->name + in_name_size, 0x0,
+ out_name_size - in_name_size);
+
+ /* Communicate */
+ ret = mm_communicate(comm_buf, payload_size);
+ if (ret == EFI_SUCCESS || ret == EFI_BUFFER_TOO_SMALL) {
+ /* Update with reported data size for trimmed case */
+ *name_size = var_getnext->name_size;
+ }
+ if (ret != EFI_SUCCESS)
+ goto out;
+
+ memcpy(guid, &var_getnext->guid, sizeof(*guid));
+ memcpy(name, var_getnext->name, var_getnext->name_size);
+
+out:
+ kfree(comm_buf);
+ return ret;
+}
+
+static efi_status_t optee_set_variable(efi_char16_t *name, efi_guid_t *vendor,
+ u32 attributes, unsigned long data_size,
+ void *data)
+{
+ efi_status_t ret;
+ struct var_check_property var_property;
+ struct smm_variable_access *var_acc;
+ size_t payload_size;
+ size_t name_size;
+ u8 *comm_buf = NULL;
+
+ if (!name || name[0] == 0 || !vendor) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+ if (data_size > 0 && !data) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+ /* Check payload size */
+ name_size = (ucs2_strnlen(name, EFI_VAR_NAME_LEN) + 1) * sizeof(u16);
+ payload_size = MM_VARIABLE_ACCESS_HEADER_SIZE + name_size + data_size;
+ if (payload_size > max_payload_size) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ /*
+ * Allocate the buffer early, before switching to RW (if needed)
+ * so we won't need to account for any failures in reading/setting
+ * the properties, if the allocation fails
+ */
+ comm_buf = setup_mm_hdr((void **)&var_acc, payload_size,
+ SMM_VARIABLE_FUNCTION_SET_VARIABLE, &ret);
+ if (!comm_buf)
+ goto out;
+
+ /*
+ * The API has the ability to override RO flags. If no RO check was
+ * requested switch the variable to RW for the duration of this call
+ */
+ ret = get_property_int(name, name_size, vendor, &var_property);
+ if (ret != EFI_SUCCESS) {
+ pr_err("Getting variable property failed\n");
+ goto out;
+ }
+
+ if (var_property.property & VAR_CHECK_VARIABLE_PROPERTY_READ_ONLY) {
+ ret = EFI_WRITE_PROTECTED;
+ goto out;
+ }
+
+ /* Fill in contents */
+ memcpy(&var_acc->guid, vendor, sizeof(var_acc->guid));
+ var_acc->data_size = data_size;
+ var_acc->name_size = name_size;
+ var_acc->attr = attributes;
+ memcpy(var_acc->name, name, name_size);
+ memcpy((u8 *)var_acc->name + name_size, data, data_size);
+
+
+ /* Communicate */
+ ret = mm_communicate(comm_buf, payload_size);
+ pr_info("Set Variable %s %d %lx\n", __FILE__, __LINE__, ret);
+out:
+ kfree(comm_buf);
+ return ret;
+}
+
+static int optee_stmm_efi_probe(struct device *dev)
+{
+ efi_status_t ret;
+
+ ret = get_max_payload(&max_payload_size);
+ if (ret != EFI_SUCCESS)
+ return ret;
+
+ max_buffer_size = MM_COMMUNICATE_HEADER_SIZE +
+ MM_VARIABLE_COMMUNICATE_SIZE +
+ max_payload_size;
+
+ optee_ops.get_variable = optee_get_variable;
+ optee_ops.get_next_variable = optee_get_next_variable;
+ optee_ops.set_variable = optee_set_variable;
+ /* TODO: support nonblocking variant */
+ optee_ops.set_variable_nonblocking = NULL;
+ /* set NULL, always return EFI_SUCCESS by efi_query_variable_store() */
+ optee_ops.query_variable_store = NULL;
+
+ tee_register_efivar_ops(&optee_efivars, &optee_ops);
+
+ return 0;
+}
+
+static int optee_stmm_efi_remove(struct device *dev)
+{
+ tee_unregister_efivar_ops(&optee_efivars);
+
+ return 0;
+}
+
+MODULE_DEVICE_TABLE(tee, optee_stmm_efi_id_table);
+
+static struct tee_client_driver optee_stmm_efi_driver = {
+ .id_table = optee_stmm_efi_id_table,
+ .driver = {
+ .name = "optee-stmm-efi",
+ .bus = &tee_bus_type,
+ .probe = optee_stmm_efi_probe,
+ .remove = optee_stmm_efi_remove,
+ },
+};
+
+static int __init optee_stmm_efi_mod_init(void)
+{
+ return driver_register(&optee_stmm_efi_driver.driver);
+}
+
+static void __exit optee_stmm_efi_mod_exit(void)
+{
+ driver_unregister(&optee_stmm_efi_driver.driver);
+}
+
+module_init(optee_stmm_efi_mod_init);
+module_exit(optee_stmm_efi_mod_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ilias Apalodimas <ilias.apalodimas@...aro.org>");
+MODULE_AUTHOR("Masahisa Kojima <masahisa.kojima@...aro.org>");
+MODULE_DESCRIPTION("OP-TEE based EFI runtime variable service driver");
diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
index 98da206cd761..ac46274844a3 100644
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -7,6 +7,7 @@
#include <linux/cdev.h>
#include <linux/cred.h>
+#include <linux/efi.h>
#include <linux/fs.h>
#include <linux/idr.h>
#include <linux/module.h>
@@ -1263,6 +1264,28 @@ static void __exit tee_exit(void)
tee_class = NULL;
}
+void tee_register_efivar_ops(struct efivars *tee_efivars,
+ struct efivar_operations *ops)
+{
+ /*
+ * If the firmware EFI runtime services support SetVariable(),
+ * tee-based EFI variable services are not used.
+ */
+ if (!efivar_supports_writes()) {
+ pr_info("Use tee-based EFI runtime variable services\n");
+ efivars_generic_ops_unregister();
+ efivars_register(tee_efivars, ops);
+ }
+}
+EXPORT_SYMBOL_GPL(tee_register_efivar_ops);
+
+void tee_unregister_efivar_ops(struct efivars *tee_efivars)
+{
+ efivars_unregister(tee_efivars);
+ efivars_generic_ops_register();
+}
+EXPORT_SYMBOL_GPL(tee_unregister_efivar_ops);
+
subsys_initcall(tee_init);
module_exit(tee_exit);
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 5e301c00e9b0..14d4aa83ce60 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -39,6 +39,7 @@
#define EFI_WRITE_PROTECTED ( 8 | (1UL << (BITS_PER_LONG-1)))
#define EFI_OUT_OF_RESOURCES ( 9 | (1UL << (BITS_PER_LONG-1)))
#define EFI_NOT_FOUND (14 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_ACCESS_DENIED (15 | (1UL << (BITS_PER_LONG-1)))
#define EFI_TIMEOUT (18 | (1UL << (BITS_PER_LONG-1)))
#define EFI_ABORTED (21 | (1UL << (BITS_PER_LONG-1)))
#define EFI_SECURITY_VIOLATION (26 | (1UL << (BITS_PER_LONG-1)))
diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h
index 17eb1c5205d3..def4ea6212ee 100644
--- a/include/linux/tee_drv.h
+++ b/include/linux/tee_drv.h
@@ -7,6 +7,7 @@
#define __TEE_DRV_H
#include <linux/device.h>
+#include <linux/efi.h>
#include <linux/idr.h>
#include <linux/kref.h>
#include <linux/list.h>
@@ -507,4 +508,26 @@ struct tee_context *teedev_open(struct tee_device *teedev);
*/
void teedev_close_context(struct tee_context *ctx);
+/**
+ * tee_register_efivar_ops() - register the efivar ops
+ * @tee_efivars: pointer to efivars structure
+ * @ops: pointer to contain the efivar operation
+ *
+ * This function registers the tee-based efivar operation as an
+ * EFI Runtime Service.
+ *
+ */
+void tee_register_efivar_ops(struct efivars *tee_efivars,
+ struct efivar_operations *ops);
+
+/**
+ * tee_unregister_efivar_ops() - unregister the efivar ops
+ * @tee_efivars: pointer to efivars structure
+ *
+ * This function unregisters the tee-based efivar operation
+ * and reverts to the generic operation.
+ *
+ */
+void tee_unregister_efivar_ops(struct efivars *tee_efivars);
+
#endif /*__TEE_DRV_H*/
--
2.30.2
Powered by blists - more mailing lists