lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230126132801.2042371-3-arnd@kernel.org>
Date:   Thu, 26 Jan 2023 14:27:55 +0100
From:   Arnd Bergmann <arnd@...nel.org>
To:     linux-gpio@...r.kernel.org
Cc:     Arnd Bergmann <arnd@...db.de>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
        Christophe Leroy <christophe.leroy@...roup.eu>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        linux-kernel@...r.kernel.org,
        Geert Uytterhoeven <geert@...ux-m68k.org>
Subject: [PATCH 2/8] gpiolib: coldfire: remove custom asm/gpio.h

From: Arnd Bergmann <arnd@...db.de>

Now that coldfire is the only user of a custom asm/gpio.h, it seems
better to remove this as well, and have the same interface everywhere.

For the gpio_get_value()/gpio_set_value()/gpio_to_irq(), gpio_cansleep()
functions, the custom version is only a micro-optimization to inline the
function for constant GPIO numbers. However, in the coldfire defconfigs,
I was unable to find a single instance where this micro-optimization
was even used, and according to Geert the only user appears to be the
QSPI chip that is disabled everywhere.

The custom gpio_request_one() function is even less useful, as it is
guarded by an #ifdef that is never true.

Reviewed-by: Geert Uytterhoeven <geert@...ux-m68k.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
 arch/m68k/Kconfig.cpu        |  1 -
 arch/m68k/include/asm/gpio.h | 95 ------------------------------------
 drivers/gpio/Kconfig         |  8 ---
 include/linux/gpio.h         |  7 ---
 4 files changed, 111 deletions(-)
 delete mode 100644 arch/m68k/include/asm/gpio.h

diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 9380f6e3bb66..96a0fb4f1af5 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -24,7 +24,6 @@ config M68KCLASSIC
 
 config COLDFIRE
 	bool "Coldfire CPU family support"
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_CAS
 	select CPU_HAS_NO_MULDIV64
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
deleted file mode 100644
index 5cfc0996ba94..000000000000
--- a/arch/m68k/include/asm/gpio.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@...dc.com>
-*/
-
-#ifndef coldfire_gpio_h
-#define coldfire_gpio_h
-
-#include <linux/io.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-/*
- * The Generic GPIO functions
- *
- * If the gpio is a compile time constant and is one of the Coldfire gpios,
- * use the inline version, otherwise dispatch thru gpiolib.
- */
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
-		return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) {
-		if (gpio < MCFGPIO_SCR_START) {
-			unsigned long flags;
-			MCFGPIO_PORTTYPE data;
-
-			local_irq_save(flags);
-			data = mcfgpio_read(__mcfgpio_podr(gpio));
-			if (value)
-				data |= mcfgpio_bit(gpio);
-			else
-				data &= ~mcfgpio_bit(gpio);
-			mcfgpio_write(data, __mcfgpio_podr(gpio));
-			local_irq_restore(flags);
-		} else {
-			if (value)
-				mcfgpio_write(mcfgpio_bit(gpio),
-						MCFGPIO_SETR_PORT(gpio));
-			else
-				mcfgpio_write(~mcfgpio_bit(gpio),
-						MCFGPIO_CLRR_PORT(gpio));
-		}
-	} else
-		__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-#if defined(MCFGPIO_IRQ_MIN)
-	if ((gpio >= MCFGPIO_IRQ_MIN) && (gpio < MCFGPIO_IRQ_MAX))
-#else
-	if (gpio < MCFGPIO_IRQ_MAX)
-#endif
-		return gpio + MCFGPIO_IRQ_VECBASE;
-	else
-		return __gpio_to_irq(gpio);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
-}
-
-#ifndef CONFIG_GPIOLIB
-static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
-{
-	int err;
-
-	err = gpio_request(gpio, label);
-	if (err)
-		return err;
-
-	if (flags & GPIOF_DIR_IN)
-		err = gpio_direction_input(gpio);
-	else
-		err = gpio_direction_output(gpio,
-			(flags & GPIOF_INIT_HIGH) ? 1 : 0);
-
-	if (err)
-		gpio_free(gpio);
-
-	return err;
-}
-#endif /* !CONFIG_GPIOLIB */
-#endif
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 218d7e4c27ff..06a268d56800 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -3,14 +3,6 @@
 # GPIO infrastructure and drivers
 #
 
-config ARCH_HAVE_CUSTOM_GPIO_H
-	bool
-	help
-	  Selecting this config option from the architecture Kconfig allows
-	  the architecture to provide a custom asm/gpio.h implementation
-	  overriding the default implementations.  New uses of this are
-	  strongly discouraged.
-
 menuconfig GPIOLIB
 	bool "GPIO Support"
 	help
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 85beb236c925..2b75017b3aad 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -54,11 +54,6 @@ struct gpio {
 };
 
 #ifdef CONFIG_GPIOLIB
-
-#ifdef CONFIG_ARCH_HAVE_CUSTOM_GPIO_H
-#include <asm/gpio.h>
-#else
-
 #include <asm-generic/gpio.h>
 
 static inline int gpio_get_value(unsigned int gpio)
@@ -81,8 +76,6 @@ static inline int gpio_to_irq(unsigned int gpio)
 	return __gpio_to_irq(gpio);
 }
 
-#endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */
-
 /* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */
 
 struct device;
-- 
2.39.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ