lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230126162323.2986682-1-arnd@kernel.org> Date: Thu, 26 Jan 2023 17:22:59 +0100 From: Arnd Bergmann <arnd@...nel.org> To: Alexander Aring <alex.aring@...il.com>, Stefan Schmidt <stefan@...enfreihafen.org> Cc: Arnd Bergmann <arnd@...db.de>, Miquel Raynal <miquel.raynal@...tlin.com>, Andy Shevchenko <andriy.shevchenko@...ux.intel.com>, "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org, linux-wpan@...r.kernel.org, netdev@...r.kernel.org Subject: [PATCH] [v2] at86rf230: convert to gpio descriptors From: Arnd Bergmann <arnd@...db.de> There are no remaining in-tree users of the platform_data, so this driver can be converted to using the simpler gpiod interfaces. Any out-of-tree users that rely on the platform data can provide the data using the device_property and gpio_lookup interfaces instead. Reviewed-by: Miquel Raynal <miquel.raynal@...tlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com> Signed-off-by: Arnd Bergmann <arnd@...db.de> --- drivers/net/ieee802154/at86rf230.c | 82 +++++++++--------------------- include/linux/spi/at86rf230.h | 20 -------- 2 files changed, 25 insertions(+), 77 deletions(-) delete mode 100644 include/linux/spi/at86rf230.h diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 15f283b26721..a4a6b7490fdc 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -15,13 +15,12 @@ #include <linux/jiffies.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/spi/spi.h> -#include <linux/spi/at86rf230.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/skbuff.h> -#include <linux/of_gpio.h> #include <linux/ieee802154.h> #include <net/mac802154.h> @@ -82,7 +81,7 @@ struct at86rf230_local { struct ieee802154_hw *hw; struct at86rf2xx_chip_data *data; struct regmap *regmap; - int slp_tr; + struct gpio_desc *slp_tr; bool sleep; struct completion state_complete; @@ -107,8 +106,8 @@ at86rf230_async_state_change(struct at86rf230_local *lp, static inline void at86rf230_sleep(struct at86rf230_local *lp) { - if (gpio_is_valid(lp->slp_tr)) { - gpio_set_value(lp->slp_tr, 1); + if (lp->slp_tr) { + gpiod_set_value(lp->slp_tr, 1); usleep_range(lp->data->t_off_to_sleep, lp->data->t_off_to_sleep + 10); lp->sleep = true; @@ -118,8 +117,8 @@ at86rf230_sleep(struct at86rf230_local *lp) static inline void at86rf230_awake(struct at86rf230_local *lp) { - if (gpio_is_valid(lp->slp_tr)) { - gpio_set_value(lp->slp_tr, 0); + if (lp->slp_tr) { + gpiod_set_value(lp->slp_tr, 0); usleep_range(lp->data->t_sleep_to_off, lp->data->t_sleep_to_off + 100); lp->sleep = false; @@ -204,9 +203,9 @@ at86rf230_write_subreg(struct at86rf230_local *lp, static inline void at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp) { - gpio_set_value(lp->slp_tr, 1); + gpiod_set_value(lp->slp_tr, 1); udelay(1); - gpio_set_value(lp->slp_tr, 0); + gpiod_set_value(lp->slp_tr, 0); } static bool @@ -819,7 +818,7 @@ at86rf230_write_frame_complete(void *context) ctx->trx.len = 2; - if (gpio_is_valid(lp->slp_tr)) + if (lp->slp_tr) at86rf230_slp_tr_rising_edge(lp); else at86rf230_async_write_reg(lp, RG_TRX_STATE, STATE_BUSY_TX, ctx, @@ -1415,32 +1414,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim) return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0); } -static int -at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr, - u8 *xtal_trim) -{ - struct at86rf230_platform_data *pdata = spi->dev.platform_data; - int ret; - - if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) { - if (!pdata) - return -ENOENT; - - *rstn = pdata->rstn; - *slp_tr = pdata->slp_tr; - *xtal_trim = pdata->xtal_trim; - return 0; - } - - *rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0); - *slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0); - ret = of_property_read_u8(spi->dev.of_node, "xtal-trim", xtal_trim); - if (ret < 0 && ret != -EINVAL) - return ret; - - return 0; -} - static int at86rf230_detect_device(struct at86rf230_local *lp) { @@ -1547,7 +1520,8 @@ static int at86rf230_probe(struct spi_device *spi) struct ieee802154_hw *hw; struct at86rf230_local *lp; unsigned int status; - int rc, irq_type, rstn, slp_tr; + int rc, irq_type; + struct gpio_desc *rstn, *slp_tr; u8 xtal_trim = 0; if (!spi->irq) { @@ -1555,32 +1529,26 @@ static int at86rf230_probe(struct spi_device *spi) return -EINVAL; } - rc = at86rf230_get_pdata(spi, &rstn, &slp_tr, &xtal_trim); - if (rc < 0) { - dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc); + rc = device_property_read_u8(&spi->dev, "xtal-trim", &xtal_trim); + if (rc < 0 && rc != -EINVAL) { + dev_err(&spi->dev, "failed to parse xtal-trim: %d\n", rc); return rc; } - if (gpio_is_valid(rstn)) { - rc = devm_gpio_request_one(&spi->dev, rstn, - GPIOF_OUT_INIT_HIGH, "rstn"); - if (rc) - return rc; - } + rstn = devm_gpiod_get_optional(&spi->dev, "rstn", GPIOD_OUT_HIGH); + if (IS_ERR(rstn)) + return PTR_ERR(rstn); - if (gpio_is_valid(slp_tr)) { - rc = devm_gpio_request_one(&spi->dev, slp_tr, - GPIOF_OUT_INIT_LOW, "slp_tr"); - if (rc) - return rc; - } + slp_tr = devm_gpiod_get_optional(&spi->dev, "slp_tr", GPIOD_OUT_LOW); + if (IS_ERR(slp_tr)) + return PTR_ERR(slp_tr); /* Reset */ - if (gpio_is_valid(rstn)) { + if (rstn) { udelay(1); - gpio_set_value_cansleep(rstn, 0); + gpiod_set_value_cansleep(rstn, 0); udelay(1); - gpio_set_value_cansleep(rstn, 1); + gpiod_set_value_cansleep(rstn, 1); usleep_range(120, 240); } @@ -1682,7 +1650,7 @@ MODULE_DEVICE_TABLE(spi, at86rf230_device_id); static struct spi_driver at86rf230_driver = { .id_table = at86rf230_device_id, .driver = { - .of_match_table = of_match_ptr(at86rf230_of_match), + .of_match_table = at86rf230_of_match, .name = "at86rf230", }, .probe = at86rf230_probe, diff --git a/include/linux/spi/at86rf230.h b/include/linux/spi/at86rf230.h deleted file mode 100644 index d278576ab692..000000000000 --- a/include/linux/spi/at86rf230.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * AT86RF230/RF231 driver - * - * Copyright (C) 2009-2012 Siemens AG - * - * Written by: - * Dmitry Eremin-Solenikov <dmitry.baryshkov@...mens.com> - */ -#ifndef AT86RF230_H -#define AT86RF230_H - -struct at86rf230_platform_data { - int rstn; - int slp_tr; - int dig2; - u8 xtal_trim; -}; - -#endif -- 2.39.0
Powered by blists - more mailing lists