[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230127211527.260060-4-krzysztof.kozlowski@linaro.org>
Date: Fri, 27 Jan 2023 22:15:27 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: replicant@...osl.org, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht,
Martin Jücker <martin.juecker@...il.com>,
Henrik Grimler <henrik@...mler.se>,
Sam Protsenko <semen.protsenko@...aro.org>,
Chanho Park <chanho61.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [RFT PATCH v2 4/4] arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7
Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address. Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:
exynos7-espresso.dtb: soc@0: usb: {'compatible': ['samsung,exynos7-dwusb3'], ...
should not be valid under {'type': 'object'}
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Changes since v1:
1. New patch
---
arch/arm64/boot/dts/exynos/exynos7.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 82fee1b7caab..b1fa68835b09 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -690,7 +690,7 @@ usbdrd_phy: phy@...00000 {
#phy-cells = <1>;
};
- usbdrd: usb {
+ usbdrd: usb@...00000 {
compatible = "samsung,exynos7-dwusb3";
clocks = <&clock_fsys0 ACLK_USBDRD300>,
<&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
@@ -699,11 +699,11 @@ usbdrd: usb {
"usbdrd30_axius_clk";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x0 0x15400000 0x10000>;
- usb@...00000 {
+ usb@0 {
compatible = "snps,dwc3";
- reg = <0x15400000 0x10000>;
+ reg = <0x0 0x10000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
--
2.34.1
Powered by blists - more mailing lists