| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230127101149.3475929-3-arnd@kernel.org>
Date: Fri, 27 Jan 2023 11:11:44 +0100
From: Arnd Bergmann <arnd@...nel.org>
To: linux-gpio@...r.kernel.org
Cc: Arnd Bergmann <arnd@...db.de>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Bartosz Golaszewski <brgl@...ev.pl>,
Christophe Leroy <christophe.leroy@...roup.eu>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH v2 2/7] gpiolib: coldfire: remove custom asm/gpio.h
From: Arnd Bergmann <arnd@...db.de>
Now that coldfire is the only user of a custom asm/gpio.h, it seems
better to remove this as well, and have the same interface everywhere.
For the gpio_get_value()/gpio_set_value()/gpio_to_irq(), gpio_cansleep()
functions, the custom version is only a micro-optimization to inline the
function for constant GPIO numbers. However, in the coldfire defconfigs,
I was unable to find a single instance where this micro-optimization
was even used, and according to Geert the only user appears to be the
QSPI chip that is disabled everywhere.
The custom gpio_request_one() function is even less useful, as it is
guarded by an #ifdef that is never true.
Reviewed-by: Geert Uytterhoeven <geert@...ux-m68k.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
arch/m68k/Kconfig.cpu | 1 -
arch/m68k/include/asm/gpio.h | 95 ------------------------------------
drivers/gpio/Kconfig | 8 ---
include/linux/gpio.h | 7 ---
4 files changed, 111 deletions(-)
delete mode 100644 arch/m68k/include/asm/gpio.h
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 9380f6e3bb66..96a0fb4f1af5 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -24,7 +24,6 @@ config M68KCLASSIC
config COLDFIRE
bool "Coldfire CPU family support"
- select ARCH_HAVE_CUSTOM_GPIO_H
select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_CAS
select CPU_HAS_NO_MULDIV64
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
deleted file mode 100644
index 5cfc0996ba94..000000000000
--- a/arch/m68k/include/asm/gpio.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@...dc.com>
-*/
-
-#ifndef coldfire_gpio_h
-#define coldfire_gpio_h
-
-#include <linux/io.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-/*
- * The Generic GPIO functions
- *
- * If the gpio is a compile time constant and is one of the Coldfire gpios,
- * use the inline version, otherwise dispatch thru gpiolib.
- */
-
-static inline int gpio_get_value(unsigned gpio)
-{
- if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
- return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
- else
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) {
- if (gpio < MCFGPIO_SCR_START) {
- unsigned long flags;
- MCFGPIO_PORTTYPE data;
-
- local_irq_save(flags);
- data = mcfgpio_read(__mcfgpio_podr(gpio));
- if (value)
- data |= mcfgpio_bit(gpio);
- else
- data &= ~mcfgpio_bit(gpio);
- mcfgpio_write(data, __mcfgpio_podr(gpio));
- local_irq_restore(flags);
- } else {
- if (value)
- mcfgpio_write(mcfgpio_bit(gpio),
- MCFGPIO_SETR_PORT(gpio));
- else
- mcfgpio_write(~mcfgpio_bit(gpio),
- MCFGPIO_CLRR_PORT(gpio));
- }
- } else
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-#if defined(MCFGPIO_IRQ_MIN)
- if ((gpio >= MCFGPIO_IRQ_MIN) && (gpio < MCFGPIO_IRQ_MAX))
-#else
- if (gpio < MCFGPIO_IRQ_MAX)
-#endif
- return gpio + MCFGPIO_IRQ_VECBASE;
- else
- return __gpio_to_irq(gpio);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
-}
-
-#ifndef CONFIG_GPIOLIB
-static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
-{
- int err;
-
- err = gpio_request(gpio, label);
- if (err)
- return err;
-
- if (flags & GPIOF_DIR_IN)
- err = gpio_direction_input(gpio);
- else
- err = gpio_direction_output(gpio,
- (flags & GPIOF_INIT_HIGH) ? 1 : 0);
-
- if (err)
- gpio_free(gpio);
-
- return err;
-}
-#endif /* !CONFIG_GPIOLIB */
-#endif
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 218d7e4c27ff..06a268d56800 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -3,14 +3,6 @@
# GPIO infrastructure and drivers
#
-config ARCH_HAVE_CUSTOM_GPIO_H
- bool
- help
- Selecting this config option from the architecture Kconfig allows
- the architecture to provide a custom asm/gpio.h implementation
- overriding the default implementations. New uses of this are
- strongly discouraged.
-
menuconfig GPIOLIB
bool "GPIO Support"
help
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 85beb236c925..2b75017b3aad 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -54,11 +54,6 @@ struct gpio {
};
#ifdef CONFIG_GPIOLIB
-
-#ifdef CONFIG_ARCH_HAVE_CUSTOM_GPIO_H
-#include <asm/gpio.h>
-#else
-
#include <asm-generic/gpio.h>
static inline int gpio_get_value(unsigned int gpio)
@@ -81,8 +76,6 @@ static inline int gpio_to_irq(unsigned int gpio)
return __gpio_to_irq(gpio);
}
-#endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */
-
/* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */
struct device;
--
2.39.0
Powered by blists - more mailing lists