lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230128031314.19752-4-Frank.Sae@motor-comm.com> Date: Sat, 28 Jan 2023 11:13:12 +0800 From: Frank Sae <Frank.Sae@...or-comm.com> To: Peter Geis <pgwipeout@...il.com>, Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>, Russell King <linux@...linux.org.uk>, "David S . Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com> Cc: xiaogang.fan@...or-comm.com, fei.zhang@...or-comm.com, hua.sun@...or-comm.com, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, Frank <Frank.Sae@...or-comm.com> Subject: [PATCH net-next v2 3/5] net: phy: Add dts support for Motorcomm yt8521 gigabit ethernet phy Add dts support for Motorcomm yt8521 gigabit ethernet phy. Add ytphy_rgmii_clk_delay_config function to support dst config for the delay of rgmii clk. This funciont is common for yt8521, yt8531s and yt8531. This patch has been verified on AM335x platform. Signed-off-by: Frank Sae <Frank.Sae@...or-comm.com> --- drivers/net/phy/motorcomm.c | 255 ++++++++++++++++++++++++++++-------- 1 file changed, 201 insertions(+), 54 deletions(-) diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index 5442eab54094..b05109f31bd7 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/phy.h> +#include <linux/of.h> #define PHY_ID_YT8511 0x0000010a #define PHY_ID_YT8521 0x0000011A @@ -187,21 +188,9 @@ * 1b1 use inverted tx_clk_rgmii. */ #define YT8521_RC1R_TX_CLK_SEL_INVERTED BIT(14) -/* TX Gig-E Delay is bits 3:0, default 0x1 - * TX Fast-E Delay is bits 7:4, default 0xf - * RX Delay is bits 13:10, default 0x0 - * Delay = 150ps * N - * On = 2250ps, off = 0ps - */ #define YT8521_RC1R_RX_DELAY_MASK GENMASK(13, 10) -#define YT8521_RC1R_RX_DELAY_EN (0xF << 10) -#define YT8521_RC1R_RX_DELAY_DIS (0x0 << 10) #define YT8521_RC1R_FE_TX_DELAY_MASK GENMASK(7, 4) -#define YT8521_RC1R_FE_TX_DELAY_EN (0xF << 4) -#define YT8521_RC1R_FE_TX_DELAY_DIS (0x0 << 4) #define YT8521_RC1R_GE_TX_DELAY_MASK GENMASK(3, 0) -#define YT8521_RC1R_GE_TX_DELAY_EN (0xF << 0) -#define YT8521_RC1R_GE_TX_DELAY_DIS (0x0 << 0) #define YT8521_RC1R_RGMII_0_000_NS 0 #define YT8521_RC1R_RGMII_0_150_NS 1 #define YT8521_RC1R_RGMII_0_300_NS 2 @@ -274,6 +263,10 @@ /* Extended Register end */ +#define YTPHY_DTS_OUTPUT_CLK_DIS 0 +#define YTPHY_DTS_OUTPUT_CLK_25M 25000000 +#define YTPHY_DTS_OUTPUT_CLK_125M 125000000 + struct yt8521_priv { /* combo_advertising is used for case of YT8521 in combo mode, * this means that yt8521 may work in utp or fiber mode which depends @@ -640,6 +633,144 @@ static int yt8521_write_page(struct phy_device *phydev, int page) return ytphy_modify_ext(phydev, YT8521_REG_SPACE_SELECT_REG, mask, set); }; +/** + * struct ytphy_cfg_reg_map - map a config value to a register value + * @cfg: value in device configuration + * @reg: value in the register + */ +struct ytphy_cfg_reg_map { + u32 cfg; + u32 reg; +}; + +static const struct ytphy_cfg_reg_map ytphy_rgmii_delays[] = { + /* for tx delay / rx delay with YT8521_CCR_RXC_DLY_EN is not set. */ + { 0, YT8521_RC1R_RGMII_0_000_NS }, + { 150, YT8521_RC1R_RGMII_0_150_NS }, + { 300, YT8521_RC1R_RGMII_0_300_NS }, + { 450, YT8521_RC1R_RGMII_0_450_NS }, + { 600, YT8521_RC1R_RGMII_0_600_NS }, + { 750, YT8521_RC1R_RGMII_0_750_NS }, + { 900, YT8521_RC1R_RGMII_0_900_NS }, + { 1050, YT8521_RC1R_RGMII_1_050_NS }, + { 1200, YT8521_RC1R_RGMII_1_200_NS }, + { 1350, YT8521_RC1R_RGMII_1_350_NS }, + { 1500, YT8521_RC1R_RGMII_1_500_NS }, + { 1650, YT8521_RC1R_RGMII_1_650_NS }, + { 1800, YT8521_RC1R_RGMII_1_800_NS }, + { 1950, YT8521_RC1R_RGMII_1_950_NS }, + { 2100, YT8521_RC1R_RGMII_2_100_NS }, + { 2250, YT8521_RC1R_RGMII_2_250_NS }, + + /* only for rx delay with YT8521_CCR_RXC_DLY_EN is set. */ + { 0 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_000_NS }, + { 150 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_150_NS }, + { 300 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_300_NS }, + { 450 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_450_NS }, + { 600 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_600_NS }, + { 750 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_750_NS }, + { 900 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_900_NS }, + { 1050 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_050_NS }, + { 1200 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_200_NS }, + { 1350 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_350_NS }, + { 1500 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_500_NS }, + { 1650 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_650_NS }, + { 1800 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_800_NS }, + { 1950 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_950_NS }, + { 2100 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_100_NS }, + { 2250 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_250_NS } +}; + +static u32 ytphy_get_delay_reg_value(struct phy_device *phydev, + const char *prop_name, + const struct ytphy_cfg_reg_map *tbl, + int tb_size, + u16 *rxc_dly_en, + u32 dflt) +{ + struct device_node *node = phydev->mdio.dev.of_node; + int tb_size_half = tb_size / 2; + u32 val; + int i; + + if (of_property_read_u32(node, prop_name, &val)) + return dflt; + + /* when rxc_dly_en is NULL, it is get the delay for tx, only half of + * tb_size is valid. + */ + if (!rxc_dly_en) + tb_size = tb_size_half; + + for (i = 0; i < tb_size; i++) { + if (tbl[i].cfg == val) { + if (rxc_dly_en && i < tb_size_half) + *rxc_dly_en = 0; + return tbl[i].reg; + } + } + + phydev_warn(phydev, "Unsupported value %d for %s using default (%u)\n", + val, prop_name, dflt); + return dflt; +} + +static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev) +{ + int tb_size = ARRAY_SIZE(ytphy_rgmii_delays); + u16 rxc_dly_en = YT8521_CCR_RXC_DLY_EN; + u32 rx_reg, tx_reg; + u16 mask, val = 0; + int ret; + + rx_reg = ytphy_get_delay_reg_value(phydev, "rx-internal-delay-ps", + ytphy_rgmii_delays, tb_size, + &rxc_dly_en, + YT8521_RC1R_RGMII_0_000_NS); + tx_reg = ytphy_get_delay_reg_value(phydev, "tx-internal-delay-ps", + ytphy_rgmii_delays, tb_size, NULL, + YT8521_RC1R_RGMII_0_150_NS); + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + rxc_dly_en = 0; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg); + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + rxc_dly_en = 0; + val |= FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg); + break; + case PHY_INTERFACE_MODE_RGMII_ID: + val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg) | + FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg); + break; + default: /* do not support other modes */ + return -EOPNOTSUPP; + } + + ret = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, + YT8521_CCR_RXC_DLY_EN, rxc_dly_en); + if (ret < 0) + return ret; + + /* Generally, it is not necessary to adjust YT8521_RC1R_FE_TX_DELAY */ + mask = YT8521_RC1R_RX_DELAY_MASK | YT8521_RC1R_GE_TX_DELAY_MASK; + return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val); +} + +static int ytphy_rgmii_clk_delay_config_with_lock(struct phy_device *phydev) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = ytphy_rgmii_clk_delay_config(phydev); + phy_unlock_mdio_bus(phydev); + + return ret; +} + /** * yt8521_probe() - read chip config then set suitable polling_mode * @phydev: a pointer to a &struct phy_device @@ -648,9 +779,12 @@ static int yt8521_write_page(struct phy_device *phydev, int page) */ static int yt8521_probe(struct phy_device *phydev) { + struct device_node *node = phydev->mdio.dev.of_node; struct device *dev = &phydev->mdio.dev; struct yt8521_priv *priv; int chip_config; + u16 mask, val; + u32 freq; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); @@ -695,7 +829,45 @@ static int yt8521_probe(struct phy_device *phydev) return ret; } - return 0; + if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq)) + freq = YTPHY_DTS_OUTPUT_CLK_DIS; + + if (phydev->drv->phy_id == PHY_ID_YT8521) { + switch (freq) { + case YTPHY_DTS_OUTPUT_CLK_DIS: + mask = YT8521_SCR_SYNCE_ENABLE; + val = 0; + break; + case YTPHY_DTS_OUTPUT_CLK_25M: + mask = YT8521_SCR_SYNCE_ENABLE | + YT8521_SCR_CLK_SRC_MASK | + YT8521_SCR_CLK_FRE_SEL_125M; + val = YT8521_SCR_SYNCE_ENABLE | + FIELD_PREP(YT8521_SCR_CLK_SRC_MASK, + YT8521_SCR_CLK_SRC_REF_25M); + break; + case YTPHY_DTS_OUTPUT_CLK_125M: + mask = YT8521_SCR_SYNCE_ENABLE | + YT8521_SCR_CLK_SRC_MASK | + YT8521_SCR_CLK_FRE_SEL_125M; + val = YT8521_SCR_SYNCE_ENABLE | + YT8521_SCR_CLK_FRE_SEL_125M | + FIELD_PREP(YT8521_SCR_CLK_SRC_MASK, + YT8521_SCR_CLK_SRC_PLL_125M); + break; + default: + phydev_warn(phydev, "Freq err:%u\n", freq); + return -EINVAL; + } + } else if (phydev->drv->phy_id == PHY_ID_YT8531S) { + return 0; + } else { + phydev_warn(phydev, "PHY id err\n"); + return -EINVAL; + } + + return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask, + val); } /** @@ -1180,61 +1352,36 @@ static int yt8521_resume(struct phy_device *phydev) */ static int yt8521_config_init(struct phy_device *phydev) { + struct device_node *node = phydev->mdio.dev.of_node; int old_page; int ret = 0; - u16 val; old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); if (old_page < 0) goto err_restore_page; - switch (phydev->interface) { - case PHY_INTERFACE_MODE_RGMII: - val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS; - val |= YT8521_RC1R_RX_DELAY_DIS; - break; - case PHY_INTERFACE_MODE_RGMII_RXID: - val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS; - val |= YT8521_RC1R_RX_DELAY_EN; - break; - case PHY_INTERFACE_MODE_RGMII_TXID: - val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN; - val |= YT8521_RC1R_RX_DELAY_DIS; - break; - case PHY_INTERFACE_MODE_RGMII_ID: - val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN; - val |= YT8521_RC1R_RX_DELAY_EN; - break; - case PHY_INTERFACE_MODE_SGMII: - break; - default: /* do not support other modes */ - ret = -EOPNOTSUPP; - goto err_restore_page; - } - /* set rgmii delay mode */ if (phydev->interface != PHY_INTERFACE_MODE_SGMII) { - ret = ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, - (YT8521_RC1R_RX_DELAY_MASK | - YT8521_RC1R_FE_TX_DELAY_MASK | - YT8521_RC1R_GE_TX_DELAY_MASK), - val); + ret = ytphy_rgmii_clk_delay_config(phydev); if (ret < 0) goto err_restore_page; } - /* disable auto sleep */ - ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, - YT8521_ESC1R_SLEEP_SW, 0); - if (ret < 0) - goto err_restore_page; - - /* enable RXC clock when no wire plug */ - ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG, - YT8521_CGR_RX_CLK_EN, 0); - if (ret < 0) - goto err_restore_page; + if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) { + /* disable auto sleep */ + ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, + YT8521_ESC1R_SLEEP_SW, 0); + if (ret < 0) + goto err_restore_page; + } + if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) { + /* enable RXC clock when no wire plug */ + ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG, + YT8521_CGR_RX_CLK_EN, 0); + if (ret < 0) + goto err_restore_page; + } err_restore_page: return phy_restore_page(phydev, old_page, ret); } -- 2.34.1
Powered by blists - more mailing lists