[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230129112927.jyx3c2hxkhwvqmyq@uno.localdomain>
Date: Sun, 29 Jan 2023 12:29:27 +0100
From: Jacopo Mondi <jacopo.mondi@...asonboard.com>
To: Luca Weiss <luca@...tu.xyz>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Shunqian Zheng <zhengsq@...k-chips.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Jacopo Mondi <jacopo.mondi@...asonboard.com>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/4] media: i2c: ov2685: Add .get_selection() support
Hi Luca
On Sun, Jan 29, 2023 at 10:42:38AM +0100, Luca Weiss wrote:
> Add support for the .get_selection() pad operation to the ov2685 sensor
> driver.
>
> Report the native sensor size (pixel array), the crop bounds (readable
> pixel array area) and the current and default analog crop rectangles.
>
> Signed-off-by: Luca Weiss <luca@...tu.xyz>
As the driver supports a single mode you could have hard-coded
the rectangle sizes in get_selection(), but this way is much better as
it prepares for adding more modes to the driver eventually.
Thanks
Reviewed-by: Jacopo Mondi <jacopo.mondi@...asonboard.com>
> ---
> drivers/media/i2c/ov2685.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 61 insertions(+)
>
> diff --git a/drivers/media/i2c/ov2685.c b/drivers/media/i2c/ov2685.c
> index bfced11b178b..7ebf36d1a8cc 100644
> --- a/drivers/media/i2c/ov2685.c
> +++ b/drivers/media/i2c/ov2685.c
> @@ -56,6 +56,9 @@
> #define OV2685_REG_VALUE_16BIT 2
> #define OV2685_REG_VALUE_24BIT 3
>
> +#define OV2685_NATIVE_WIDTH 1616
> +#define OV2685_NATIVE_HEIGHT 1216
> +
> #define OV2685_LANES 1
> #define OV2685_BITS_PER_SAMPLE 10
>
> @@ -78,6 +81,7 @@ struct ov2685_mode {
> u32 exp_def;
> u32 hts_def;
> u32 vts_def;
> + const struct v4l2_rect *analog_crop;
> const struct regval *reg_list;
> };
>
> @@ -231,6 +235,13 @@ static const int ov2685_test_pattern_val[] = {
> OV2685_TEST_PATTERN_COLOR_SQUARE,
> };
>
> +static const struct v4l2_rect ov2685_analog_crop = {
> + .left = 8,
> + .top = 8,
> + .width = 1600,
> + .height = 1200,
> +};
> +
> static const struct ov2685_mode supported_modes[] = {
> {
> .width = 1600,
> @@ -238,6 +249,7 @@ static const struct ov2685_mode supported_modes[] = {
> .exp_def = 0x04ee,
> .hts_def = 0x06a4,
> .vts_def = 0x050e,
> + .analog_crop = &ov2685_analog_crop,
> .reg_list = ov2685_1600x1200_regs,
> },
> };
> @@ -384,6 +396,53 @@ static int ov2685_enum_frame_sizes(struct v4l2_subdev *sd,
> return 0;
> }
>
> +static const struct v4l2_rect *
> +__ov2685_get_pad_crop(struct ov2685 *ov2685,
> + struct v4l2_subdev_state *state, unsigned int pad,
> + enum v4l2_subdev_format_whence which)
> +{
> + const struct ov2685_mode *mode = ov2685->cur_mode;
> +
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> + return v4l2_subdev_get_try_crop(&ov2685->subdev, state, pad);
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return mode->analog_crop;
> + }
> +
> + return NULL;
> +}
> +
> +static int ov2685_get_selection(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_selection *sel)
> +{
> + struct ov2685 *ov2685 = to_ov2685(sd);
> +
> + switch (sel->target) {
> + case V4L2_SEL_TGT_CROP:
> + mutex_lock(&ov2685->mutex);
> + sel->r = *__ov2685_get_pad_crop(ov2685, sd_state, sel->pad,
> + sel->which);
> + mutex_unlock(&ov2685->mutex);
> + break;
> + case V4L2_SEL_TGT_NATIVE_SIZE:
> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + sel->r.top = 0;
> + sel->r.left = 0;
> + sel->r.width = OV2685_NATIVE_WIDTH;
> + sel->r.height = OV2685_NATIVE_HEIGHT;
> + break;
> + case V4L2_SEL_TGT_CROP_DEFAULT:
> + sel->r = ov2685_analog_crop;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> /* Calculate the delay in us by clock rate and clock cycles */
> static inline u32 ov2685_cal_delay(u32 cycles)
> {
> @@ -592,6 +651,8 @@ static const struct v4l2_subdev_pad_ops ov2685_pad_ops = {
> .enum_frame_size = ov2685_enum_frame_sizes,
> .get_fmt = ov2685_get_fmt,
> .set_fmt = ov2685_set_fmt,
> + .get_selection = ov2685_get_selection,
> + .set_selection = ov2685_get_selection,
> };
>
> static const struct v4l2_subdev_ops ov2685_subdev_ops = {
>
> --
> 2.39.1
>
Powered by blists - more mailing lists