| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230129120442.22858-5-paul@crapouillou.net>
Date: Sun, 29 Jan 2023 12:04:42 +0000
From: Paul Cercueil <paul@...pouillou.net>
To: Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-rtc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mips@...r.kernel.org,
list@...ndingux.net, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH v3 4/4] rtc: jz4740: Register clock provider for the CLK32K pin
On JZ4770 and JZ4780, the CLK32K pin is configurable. By default, it is
configured as a GPIO in input mode, and its value can be read through
GPIO PD14.
With this change, clients can now request the 32 kHz clock on the CLK32K
pin, through Device Tree. This clock is simply a pass-through of the
input oscillator's clock with enable/disable operations.
This will permit the WiFi/Bluetooth chip to work on the MIPS CI20 board,
which does source one of its clocks from the CLK32K pin.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
v3: - Use dev_err_probe()
- Use __clk_hw_get() to get a pointer to the parent clock, instead
of doing it by name.
- Add Kconfig dependency on CONFIG_COMMON_CLK
- Register CLK32K clock if the #clock-cells device property is
present, instead of doing it based on the compatible string
---
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-jz4740.c | 56 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 1 deletion(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 677d2601d305..d2b6d20a6745 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1690,7 +1690,7 @@ config RTC_DRV_MPC5121
config RTC_DRV_JZ4740
tristate "Ingenic JZ4740 SoC"
depends on MIPS || COMPILE_TEST
- depends on OF
+ depends on OF && COMMON_CLK
help
If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
controllers.
diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c
index 9ffa764aa71e..59d279e3e6f5 100644
--- a/drivers/rtc/rtc-jz4740.c
+++ b/drivers/rtc/rtc-jz4740.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
@@ -13,6 +14,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_wakeirq.h>
+#include <linux/property.h>
#include <linux/reboot.h>
#include <linux/rtc.h>
#include <linux/slab.h>
@@ -26,6 +28,7 @@
#define JZ_REG_RTC_WAKEUP_FILTER 0x24
#define JZ_REG_RTC_RESET_COUNTER 0x28
#define JZ_REG_RTC_SCRATCHPAD 0x34
+#define JZ_REG_RTC_CKPCR 0x40
/* The following are present on the jz4780 */
#define JZ_REG_RTC_WENR 0x3C
@@ -45,6 +48,9 @@
#define JZ_RTC_WAKEUP_FILTER_MASK 0x0000FFE0
#define JZ_RTC_RESET_COUNTER_MASK 0x00000FE0
+#define JZ_RTC_CKPCR_CK32PULL_DIS BIT(4)
+#define JZ_RTC_CKPCR_CK32CTL_EN (BIT(2) | BIT(1))
+
enum jz4740_rtc_type {
ID_JZ4740,
ID_JZ4760,
@@ -57,6 +63,8 @@ struct jz4740_rtc {
struct rtc_device *rtc;
+ struct clk_hw clk32k;
+
spinlock_t lock;
};
@@ -254,6 +262,7 @@ static void jz4740_rtc_power_off(void)
static const struct of_device_id jz4740_rtc_of_match[] = {
{ .compatible = "ingenic,jz4740-rtc", .data = (void *)ID_JZ4740 },
{ .compatible = "ingenic,jz4760-rtc", .data = (void *)ID_JZ4760 },
+ { .compatible = "ingenic,jz4770-rtc", .data = (void *)ID_JZ4780 },
{ .compatible = "ingenic,jz4780-rtc", .data = (void *)ID_JZ4780 },
{},
};
@@ -295,6 +304,38 @@ static void jz4740_rtc_set_wakeup_params(struct jz4740_rtc *rtc,
jz4740_rtc_reg_write(rtc, JZ_REG_RTC_RESET_COUNTER, reset_ticks);
}
+static int jz4740_rtc_clk32k_enable(struct clk_hw *hw)
+{
+ struct jz4740_rtc *rtc = container_of(hw, struct jz4740_rtc, clk32k);
+
+ return jz4740_rtc_reg_write(rtc, JZ_REG_RTC_CKPCR,
+ JZ_RTC_CKPCR_CK32PULL_DIS |
+ JZ_RTC_CKPCR_CK32CTL_EN);
+}
+
+static void jz4740_rtc_clk32k_disable(struct clk_hw *hw)
+{
+ struct jz4740_rtc *rtc = container_of(hw, struct jz4740_rtc, clk32k);
+
+ jz4740_rtc_reg_write(rtc, JZ_REG_RTC_CKPCR, 0);
+}
+
+static int jz4740_rtc_clk32k_is_enabled(struct clk_hw *hw)
+{
+ struct jz4740_rtc *rtc = container_of(hw, struct jz4740_rtc, clk32k);
+ u32 ckpcr;
+
+ ckpcr = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CKPCR);
+
+ return !!(ckpcr & JZ_RTC_CKPCR_CK32CTL_EN);
+}
+
+static const struct clk_ops jz4740_rtc_clk32k_ops = {
+ .enable = jz4740_rtc_clk32k_enable,
+ .disable = jz4740_rtc_clk32k_disable,
+ .is_enabled = jz4740_rtc_clk32k_is_enabled,
+};
+
static int jz4740_rtc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -364,6 +405,21 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
dev_warn(dev, "Poweroff handler already present!\n");
}
+ if (device_property_present(dev, "#clock-cells")) {
+ rtc->clk32k.init = CLK_HW_INIT_HW("clk32k", __clk_get_hw(clk),
+ &jz4740_rtc_clk32k_ops, 0);
+
+ ret = devm_clk_hw_register(dev, &rtc->clk32k);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Unable to register clk32k clock\n");
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &rtc->clk32k);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Unable to register clk32k clock provider\n");
+ }
+
return 0;
}
--
2.39.0
Powered by blists - more mailing lists