Date:   Mon, 30 Jan 2023 19:11:52 +0000
From:   Fabrizio Castro <fabrizio.castro.jz@...esas.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>
Cc:     Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
        Magnus Damm <magnus.damm@...il.com>,
        linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Chris Paterson <Chris.Paterson2@...esas.com>,
        Biju Das <biju.das@...renesas.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Jacopo Mondi <jacopo@...ndi.org>
Subject: [PATCH v2] arm64: dts: renesas: v2mevk2: Add uSD card and eMMC support

The RZ/V2M EVK comes with a slot for a uSD card, and an eMMC.
Add support for the both of them.

Please note that the pinctrl driver for RZ/V2M doesn't support
interrupts yet, therefore the card detect pin has been connected
to the SDHI IP directly in this patch.
We'll connect the card detect pin to its corresponding GPIO when
we'll have driver support for interrupts in the RZ/V2M pinctrl
driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
v1->v2: Add properties no-sd; and no-sdio; to emmc node
	Moved emmc_pins to respect sort order
	Added Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>

 .../boot/dts/renesas/r9a09g011-v2mevk2.dts    | 124 ++++++++++++++++++
 1 file changed, 124 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
index d6737395df67..36a2afeb6c74 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "r9a09g011.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
 
 / {
@@ -35,6 +36,36 @@ memory@...000000 {
 		device_type = "memory";
 		reg = <0x1 0x80000000 0x0 0x80000000>;
 	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&pwc 0 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 0>, <1800000 1>;
+	};
 };
 
 &avb {
@@ -50,6 +81,24 @@ phy0: ethernet-phy@0 {
 	};
 };
 
+&emmc {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	max-frequency = <200000000>;
+	status = "okay";
+};
+
+
 &extal_clk {
 	clock-frequency = <48000000>;
 };
@@ -69,6 +118,26 @@ &i2c2 {
 };
 
 &pinctrl {
+	emmc_pins: emmc {
+		emmc_pins_data {
+			pinmux = <RZV2M_PORT_PINMUX(0, 0, 2)>, /* MMDAT0 */
+				 <RZV2M_PORT_PINMUX(0, 1, 2)>, /* MMDAT1 */
+				 <RZV2M_PORT_PINMUX(0, 2, 2)>, /* MMDAT2 */
+				 <RZV2M_PORT_PINMUX(0, 3, 2)>, /* MMDAT3 */
+				 <RZV2M_PORT_PINMUX(0, 4, 2)>, /* MMDAT4 */
+				 <RZV2M_PORT_PINMUX(0, 5, 2)>, /* MMDAT5 */
+				 <RZV2M_PORT_PINMUX(0, 6, 2)>, /* MMDAT6 */
+				 <RZV2M_PORT_PINMUX(0, 7, 2)>; /* MMDAT7 */
+			power-source = <1800>;
+		};
+
+		emmc_pins_ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(0, 10, 2)>, /* MMCMD */
+				 <RZV2M_PORT_PINMUX(0, 11, 2)>; /* MMCLK */
+			power-source = <1800>;
+		};
+	};
+
 	i2c0_pins: i2c0 {
 		pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */
 			 <RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */
@@ -78,6 +147,48 @@ i2c2_pins: i2c2 {
 		pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
 			 <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
 	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <3300>;
+		};
+
+		sd0_cd {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <3300>;
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <1800>;
+		};
+
+		sd0_cd_uhs {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <1800>;
+		};
+	};
 };
 
 &pwc {
@@ -85,6 +196,19 @@ &pwc {
 	status = "okay";
 };
 
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
-- 
2.34.1

Powered by blists - more mailing lists