| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230130211050.16753-2-linux@zary.sk>
Date: Mon, 30 Jan 2023 22:10:50 +0100
From: Ondrej Zary <linux@...y.sk>
To: Damien Le Moal <damien.lemoal@...nsource.wdc.com>
Cc: Christoph Hellwig <hch@....de>,
Sergey Shtylyov <s.shtylyov@....ru>,
Jens Axboe <axboe@...nel.dk>, Tim Waugh <tim@...erelk.net>,
linux-block@...r.kernel.org, linux-parport@...ts.infradead.org,
linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport
Move PARIDE protocol modules out of drivers/block and update CONFIG_
symbol names to PATA_PARPORT.
Signed-off-by: Ondrej Zary <linux@...y.sk>
---
drivers/Makefile | 2 +-
drivers/ata/Kconfig | 2 +-
drivers/ata/pata_parport/Kconfig | 141 ++++++++++++
drivers/ata/pata_parport/Makefile | 17 ++
.../{block/paride => ata/pata_parport}/aten.c | 0
.../{block/paride => ata/pata_parport}/bpck.c | 0
.../paride => ata/pata_parport}/bpck6.c | 0
.../{block/paride => ata/pata_parport}/comm.c | 0
.../{block/paride => ata/pata_parport}/dstr.c | 0
.../{block/paride => ata/pata_parport}/epat.c | 0
.../{block/paride => ata/pata_parport}/epia.c | 0
.../{block/paride => ata/pata_parport}/fit2.c | 0
.../{block/paride => ata/pata_parport}/fit3.c | 0
.../{block/paride => ata/pata_parport}/friq.c | 0
.../{block/paride => ata/pata_parport}/frpw.c | 0
.../{block/paride => ata/pata_parport}/kbic.c | 0
.../{block/paride => ata/pata_parport}/ktti.c | 0
.../{block/paride => ata/pata_parport}/on20.c | 0
.../{block/paride => ata/pata_parport}/on26.c | 0
.../paride => ata/pata_parport}/ppc6lnx.c | 0
drivers/block/Kconfig | 2 -
drivers/block/paride/Kconfig | 213 ------------------
drivers/block/paride/Makefile | 23 --
23 files changed, 160 insertions(+), 240 deletions(-)
create mode 100644 drivers/ata/pata_parport/Kconfig
create mode 100644 drivers/ata/pata_parport/Makefile
rename drivers/{block/paride => ata/pata_parport}/aten.c (100%)
rename drivers/{block/paride => ata/pata_parport}/bpck.c (100%)
rename drivers/{block/paride => ata/pata_parport}/bpck6.c (100%)
rename drivers/{block/paride => ata/pata_parport}/comm.c (100%)
rename drivers/{block/paride => ata/pata_parport}/dstr.c (100%)
rename drivers/{block/paride => ata/pata_parport}/epat.c (100%)
rename drivers/{block/paride => ata/pata_parport}/epia.c (100%)
rename drivers/{block/paride => ata/pata_parport}/fit2.c (100%)
rename drivers/{block/paride => ata/pata_parport}/fit3.c (100%)
rename drivers/{block/paride => ata/pata_parport}/friq.c (100%)
rename drivers/{block/paride => ata/pata_parport}/frpw.c (100%)
rename drivers/{block/paride => ata/pata_parport}/kbic.c (100%)
rename drivers/{block/paride => ata/pata_parport}/ktti.c (100%)
rename drivers/{block/paride => ata/pata_parport}/on20.c (100%)
rename drivers/{block/paride => ata/pata_parport}/on26.c (100%)
rename drivers/{block/paride => ata/pata_parport}/ppc6lnx.c (100%)
delete mode 100644 drivers/block/paride/Kconfig
delete mode 100644 drivers/block/paride/Makefile
diff --git a/drivers/Makefile b/drivers/Makefile
index f1365608bc8c..de8aa561c95c 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -98,7 +98,7 @@ obj-$(CONFIG_DIO) += dio/
obj-$(CONFIG_SBUS) += sbus/
obj-$(CONFIG_ZORRO) += zorro/
obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
-obj-y += block/paride/
+obj-$(CONFIG_PATA_PARPORT) += ata/pata_parport/
obj-$(CONFIG_TC) += tc/
obj-$(CONFIG_USB_PHY) += usb/
obj-$(CONFIG_USB) += usb/
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a5a31ba34bd3..2fa9e66ba824 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -1174,7 +1174,7 @@ config PATA_PARPORT
Read <file:Documentation/admin-guide/blockdev/paride.rst> for more
information.
- Use the old PARIDE protocol modules.
+source "drivers/ata/pata_parport/Kconfig"
comment "Generic fallback / legacy drivers"
diff --git a/drivers/ata/pata_parport/Kconfig b/drivers/ata/pata_parport/Kconfig
new file mode 100644
index 000000000000..0893a13e7979
--- /dev/null
+++ b/drivers/ata/pata_parport/Kconfig
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0
+
+comment "Parallel IDE protocol modules"
+ depends on PATA_PARPORT
+
+config PATA_PARPORT_ATEN
+ tristate "ATEN EH-100 protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the ATEN EH-100 parallel port IDE
+ protocol. This protocol is used in some inexpensive low performance
+ parallel port kits made in Hong Kong.
+
+config PATA_PARPORT_BPCK
+ tristate "MicroSolutions backpack (Series 5) protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the Micro Solutions BACKPACK
+ parallel port Series 5 IDE protocol. (Most BACKPACK drives made
+ before 1999 were Series 5) Series 5 drives will NOT always have the
+ Series noted on the bottom of the drive. Series 6 drivers will.
+
+ In other words, if your BACKPACK drive doesn't say "Series 6" on the
+ bottom, enable this option.
+
+config PATA_PARPORT_BPCK6
+ tristate "MicroSolutions backpack (Series 6) protocol"
+ depends on (PATA_PARPORT) && !64BIT
+ help
+ This option enables support for the Micro Solutions BACKPACK
+ parallel port Series 6 IDE protocol. (Most BACKPACK drives made
+ after 1999 were Series 6) Series 6 drives will have the Series noted
+ on the bottom of the drive. Series 5 drivers don't always have it
+ noted.
+
+ In other words, if your BACKPACK drive says "Series 6" on the
+ bottom, enable this option.
+
+config PATA_PARPORT_COMM
+ tristate "DataStor Commuter protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the Commuter parallel port IDE
+ protocol from DataStor.
+
+config PATA_PARPORT_DSTR
+ tristate "DataStor EP-2000 protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the EP-2000 parallel port IDE
+ protocol from DataStor
+
+config PATA_PARPORT_FIT2
+ tristate "FIT TD-2000 protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the TD-2000 parallel port IDE
+ protocol from Fidelity International Technology. This is a simple
+ (low speed) adapter that is used in some portable hard drives.
+
+config PATA_PARPORT_FIT3
+ tristate "FIT TD-3000 protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the TD-3000 parallel port IDE
+ protocol from Fidelity International Technology. This protocol is
+ used in newer models of their portable disk, CD-ROM and PD/CD
+ devices.
+
+config PATA_PARPORT_EPAT
+ tristate "Shuttle EPAT/EPEZ protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the EPAT parallel port IDE protocol.
+ EPAT is a parallel port IDE adapter manufactured by Shuttle
+ Technology and widely used in devices from major vendors such as
+ Hewlett-Packard, SyQuest, Imation and Avatar.
+
+config PATA_PARPORT_EPATC8
+ bool "Support c7/c8 chips"
+ depends on PATA_PARPORT_EPAT
+ help
+ This option enables support for the newer Shuttle EP1284 (aka c7 and
+ c8) chip. You need this if you are using any recent Imation SuperDisk
+ (LS-120) drive.
+
+config PATA_PARPORT_EPIA
+ tristate "Shuttle EPIA protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the (obsolete) EPIA parallel port
+ IDE protocol from Shuttle Technology. This adapter can still be
+ found in some no-name kits.
+
+config PATA_PARPORT_FRIQ
+ tristate "Freecom IQ ASIC-2 protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for version 2 of the Freecom IQ parallel
+ port IDE adapter. This adapter is used by the Maxell Superdisk
+ drive.
+
+config PATA_PARPORT_FRPW
+ tristate "FreeCom power protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the Freecom power parallel port IDE
+ protocol.
+
+config PATA_PARPORT_KBIC
+ tristate "KingByte KBIC-951A/971A protocols"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the KBIC-951A and KBIC-971A parallel
+ port IDE protocols from KingByte Information Corp. KingByte's
+ adapters appear in many no-name portable disk and CD-ROM products,
+ especially in Europe.
+
+config PATA_PARPORT_KTTI
+ tristate "KT PHd protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the "PHd" parallel port IDE protocol
+ from KT Technology. This is a simple (low speed) adapter that is
+ used in some 2.5" portable hard drives.
+
+config PATA_PARPORT_ON20
+ tristate "OnSpec 90c20 protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the (obsolete) 90c20 parallel port
+ IDE protocol from OnSpec (often marketed under the ValuStore brand
+ name).
+
+config PATA_PARPORT_ON26
+ tristate "OnSpec 90c26 protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the 90c26 parallel port IDE protocol
+ from OnSpec Electronics (often marketed under the ValuStore brand
+ name).
diff --git a/drivers/ata/pata_parport/Makefile b/drivers/ata/pata_parport/Makefile
new file mode 100644
index 000000000000..716727d4ff8b
--- /dev/null
+++ b/drivers/ata/pata_parport/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PATA_PARPORT_ATEN) += aten.o
+obj-$(CONFIG_PATA_PARPORT_BPCK) += bpck.o
+obj-$(CONFIG_PATA_PARPORT_COMM) += comm.o
+obj-$(CONFIG_PATA_PARPORT_DSTR) += dstr.o
+obj-$(CONFIG_PATA_PARPORT_KBIC) += kbic.o
+obj-$(CONFIG_PATA_PARPORT_EPAT) += epat.o
+obj-$(CONFIG_PATA_PARPORT_EPIA) += epia.o
+obj-$(CONFIG_PATA_PARPORT_FRPW) += frpw.o
+obj-$(CONFIG_PATA_PARPORT_FRIQ) += friq.o
+obj-$(CONFIG_PATA_PARPORT_FIT2) += fit2.o
+obj-$(CONFIG_PATA_PARPORT_FIT3) += fit3.o
+obj-$(CONFIG_PATA_PARPORT_ON20) += on20.o
+obj-$(CONFIG_PATA_PARPORT_ON26) += on26.o
+obj-$(CONFIG_PATA_PARPORT_KTTI) += ktti.o
+obj-$(CONFIG_PATA_PARPORT_BPCK6) += bpck6.o
diff --git a/drivers/block/paride/aten.c b/drivers/ata/pata_parport/aten.c
similarity index 100%
rename from drivers/block/paride/aten.c
rename to drivers/ata/pata_parport/aten.c
diff --git a/drivers/block/paride/bpck.c b/drivers/ata/pata_parport/bpck.c
similarity index 100%
rename from drivers/block/paride/bpck.c
rename to drivers/ata/pata_parport/bpck.c
diff --git a/drivers/block/paride/bpck6.c b/drivers/ata/pata_parport/bpck6.c
similarity index 100%
rename from drivers/block/paride/bpck6.c
rename to drivers/ata/pata_parport/bpck6.c
diff --git a/drivers/block/paride/comm.c b/drivers/ata/pata_parport/comm.c
similarity index 100%
rename from drivers/block/paride/comm.c
rename to drivers/ata/pata_parport/comm.c
diff --git a/drivers/block/paride/dstr.c b/drivers/ata/pata_parport/dstr.c
similarity index 100%
rename from drivers/block/paride/dstr.c
rename to drivers/ata/pata_parport/dstr.c
diff --git a/drivers/block/paride/epat.c b/drivers/ata/pata_parport/epat.c
similarity index 100%
rename from drivers/block/paride/epat.c
rename to drivers/ata/pata_parport/epat.c
diff --git a/drivers/block/paride/epia.c b/drivers/ata/pata_parport/epia.c
similarity index 100%
rename from drivers/block/paride/epia.c
rename to drivers/ata/pata_parport/epia.c
diff --git a/drivers/block/paride/fit2.c b/drivers/ata/pata_parport/fit2.c
similarity index 100%
rename from drivers/block/paride/fit2.c
rename to drivers/ata/pata_parport/fit2.c
diff --git a/drivers/block/paride/fit3.c b/drivers/ata/pata_parport/fit3.c
similarity index 100%
rename from drivers/block/paride/fit3.c
rename to drivers/ata/pata_parport/fit3.c
diff --git a/drivers/block/paride/friq.c b/drivers/ata/pata_parport/friq.c
similarity index 100%
rename from drivers/block/paride/friq.c
rename to drivers/ata/pata_parport/friq.c
diff --git a/drivers/block/paride/frpw.c b/drivers/ata/pata_parport/frpw.c
similarity index 100%
rename from drivers/block/paride/frpw.c
rename to drivers/ata/pata_parport/frpw.c
diff --git a/drivers/block/paride/kbic.c b/drivers/ata/pata_parport/kbic.c
similarity index 100%
rename from drivers/block/paride/kbic.c
rename to drivers/ata/pata_parport/kbic.c
diff --git a/drivers/block/paride/ktti.c b/drivers/ata/pata_parport/ktti.c
similarity index 100%
rename from drivers/block/paride/ktti.c
rename to drivers/ata/pata_parport/ktti.c
diff --git a/drivers/block/paride/on20.c b/drivers/ata/pata_parport/on20.c
similarity index 100%
rename from drivers/block/paride/on20.c
rename to drivers/ata/pata_parport/on20.c
diff --git a/drivers/block/paride/on26.c b/drivers/ata/pata_parport/on26.c
similarity index 100%
rename from drivers/block/paride/on26.c
rename to drivers/ata/pata_parport/on26.c
diff --git a/drivers/block/paride/ppc6lnx.c b/drivers/ata/pata_parport/ppc6lnx.c
similarity index 100%
rename from drivers/block/paride/ppc6lnx.c
rename to drivers/ata/pata_parport/ppc6lnx.c
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 71c9c6e3c07a..89d5cca82f00 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -103,8 +103,6 @@ config GDROM
Most users will want to say "Y" here.
You can also build this as a module which will be called gdrom.
-source "drivers/block/paride/Kconfig"
-
source "drivers/block/mtip32xx/Kconfig"
source "drivers/block/zram/Kconfig"
diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig
deleted file mode 100644
index 19310be860b2..000000000000
--- a/drivers/block/paride/Kconfig
+++ /dev/null
@@ -1,213 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# PARIDE configuration
-
-comment "Parallel IDE protocol modules"
- depends on PATA_PARPORT
-
-config PARIDE_ATEN
- tristate "ATEN EH-100 protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the ATEN EH-100 parallel port IDE
- protocol. This protocol is used in some inexpensive low performance
- parallel port kits made in Hong Kong. If you chose to build PARIDE
- support into your kernel, you may answer Y here to build in the
- protocol driver, otherwise you should answer M to build it as a
- loadable module. The module will be called aten. You must also
- have a high-level driver for the type of device that you want to
- support.
-
-config PARIDE_BPCK
- tristate "MicroSolutions backpack (Series 5) protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the Micro Solutions BACKPACK
- parallel port Series 5 IDE protocol. (Most BACKPACK drives made
- before 1999 were Series 5) Series 5 drives will NOT always have the
- Series noted on the bottom of the drive. Series 6 drivers will.
-
- In other words, if your BACKPACK drive doesn't say "Series 6" on the
- bottom, enable this option.
-
- If you chose to build PARIDE support into your kernel, you may
- answer Y here to build in the protocol driver, otherwise you should
- answer M to build it as a loadable module. The module will be
- called bpck. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_BPCK6
- tristate "MicroSolutions backpack (Series 6) protocol"
- depends on (PATA_PARPORT) && !64BIT
- help
- This option enables support for the Micro Solutions BACKPACK
- parallel port Series 6 IDE protocol. (Most BACKPACK drives made
- after 1999 were Series 6) Series 6 drives will have the Series noted
- on the bottom of the drive. Series 5 drivers don't always have it
- noted.
-
- In other words, if your BACKPACK drive says "Series 6" on the
- bottom, enable this option.
-
- If you chose to build PARIDE support into your kernel, you may
- answer Y here to build in the protocol driver, otherwise you should
- answer M to build it as a loadable module. The module will be
- called bpck6. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_COMM
- tristate "DataStor Commuter protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the Commuter parallel port IDE
- protocol from DataStor. If you chose to build PARIDE support
- into your kernel, you may answer Y here to build in the protocol
- driver, otherwise you should answer M to build it as a loadable
- module. The module will be called comm. You must also have
- a high-level driver for the type of device that you want to support.
-
-config PARIDE_DSTR
- tristate "DataStor EP-2000 protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the EP-2000 parallel port IDE
- protocol from DataStor. If you chose to build PARIDE support
- into your kernel, you may answer Y here to build in the protocol
- driver, otherwise you should answer M to build it as a loadable
- module. The module will be called dstr. You must also have
- a high-level driver for the type of device that you want to support.
-
-config PARIDE_FIT2
- tristate "FIT TD-2000 protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the TD-2000 parallel port IDE
- protocol from Fidelity International Technology. This is a simple
- (low speed) adapter that is used in some portable hard drives. If
- you chose to build PARIDE support into your kernel, you may answer Y
- here to build in the protocol driver, otherwise you should answer M
- to build it as a loadable module. The module will be called ktti.
- You must also have a high-level driver for the type of device that
- you want to support.
-
-config PARIDE_FIT3
- tristate "FIT TD-3000 protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the TD-3000 parallel port IDE
- protocol from Fidelity International Technology. This protocol is
- used in newer models of their portable disk, CD-ROM and PD/CD
- devices. If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will be
- called fit3. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_EPAT
- tristate "Shuttle EPAT/EPEZ protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the EPAT parallel port IDE protocol.
- EPAT is a parallel port IDE adapter manufactured by Shuttle
- Technology and widely used in devices from major vendors such as
- Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
- PARIDE support into your kernel, you may answer Y here to build in
- the protocol driver, otherwise you should answer M to build it as a
- loadable module. The module will be called epat. You must also
- have a high-level driver for the type of device that you want to
- support.
-
-config PARIDE_EPATC8
- bool "Support c7/c8 chips"
- depends on PARIDE_EPAT
- help
- This option enables support for the newer Shuttle EP1284 (aka c7 and
- c8) chip. You need this if you are using any recent Imation SuperDisk
- (LS-120) drive.
-
-config PARIDE_EPIA
- tristate "Shuttle EPIA protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the (obsolete) EPIA parallel port
- IDE protocol from Shuttle Technology. This adapter can still be
- found in some no-name kits. If you chose to build PARIDE support
- into your kernel, you may answer Y here to build in the protocol
- driver, otherwise you should answer M to build it as a loadable
- module. The module will be called epia. You must also have a
- high-level driver for the type of device that you want to support.
-
-config PARIDE_FRIQ
- tristate "Freecom IQ ASIC-2 protocol"
- depends on PATA_PARPORT
- help
- This option enables support for version 2 of the Freecom IQ parallel
- port IDE adapter. This adapter is used by the Maxell Superdisk
- drive. If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will be
- called friq. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_FRPW
- tristate "FreeCom power protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the Freecom power parallel port IDE
- protocol. If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will be
- called frpw. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_KBIC
- tristate "KingByte KBIC-951A/971A protocols"
- depends on PATA_PARPORT
- help
- This option enables support for the KBIC-951A and KBIC-971A parallel
- port IDE protocols from KingByte Information Corp. KingByte's
- adapters appear in many no-name portable disk and CD-ROM products,
- especially in Europe. If you chose to build PARIDE support into your
- kernel, you may answer Y here to build in the protocol driver,
- otherwise you should answer M to build it as a loadable module. The
- module will be called kbic. You must also have a high-level driver
- for the type of device that you want to support.
-
-config PARIDE_KTTI
- tristate "KT PHd protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the "PHd" parallel port IDE protocol
- from KT Technology. This is a simple (low speed) adapter that is
- used in some 2.5" portable hard drives. If you chose to build PARIDE
- support into your kernel, you may answer Y here to build in the
- protocol driver, otherwise you should answer M to build it as a
- loadable module. The module will be called ktti. You must also
- have a high-level driver for the type of device that you want to
- support.
-
-config PARIDE_ON20
- tristate "OnSpec 90c20 protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the (obsolete) 90c20 parallel port
- IDE protocol from OnSpec (often marketed under the ValuStore brand
- name). If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will
- be called on20. You must also have a high-level driver for the
- type of device that you want to support.
-
-config PARIDE_ON26
- tristate "OnSpec 90c26 protocol"
- depends on PATA_PARPORT
- help
- This option enables support for the 90c26 parallel port IDE protocol
- from OnSpec Electronics (often marketed under the ValuStore brand
- name). If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will be
- called on26. You must also have a high-level driver for the type
- of device that you want to support.
-
-#
diff --git a/drivers/block/paride/Makefile b/drivers/block/paride/Makefile
deleted file mode 100644
index cdf54a27b0e7..000000000000
--- a/drivers/block/paride/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for Parallel port IDE device drivers.
-#
-# 7 October 2000, Bartlomiej Zolnierkiewicz <bkz@...ux-ide.org>
-# Rewritten to use lists instead of if-statements.
-#
-
-obj-$(CONFIG_PARIDE_ATEN) += aten.o
-obj-$(CONFIG_PARIDE_BPCK) += bpck.o
-obj-$(CONFIG_PARIDE_COMM) += comm.o
-obj-$(CONFIG_PARIDE_DSTR) += dstr.o
-obj-$(CONFIG_PARIDE_KBIC) += kbic.o
-obj-$(CONFIG_PARIDE_EPAT) += epat.o
-obj-$(CONFIG_PARIDE_EPIA) += epia.o
-obj-$(CONFIG_PARIDE_FRPW) += frpw.o
-obj-$(CONFIG_PARIDE_FRIQ) += friq.o
-obj-$(CONFIG_PARIDE_FIT2) += fit2.o
-obj-$(CONFIG_PARIDE_FIT3) += fit3.o
-obj-$(CONFIG_PARIDE_ON20) += on20.o
-obj-$(CONFIG_PARIDE_ON26) += on26.o
-obj-$(CONFIG_PARIDE_KTTI) += ktti.o
-obj-$(CONFIG_PARIDE_BPCK6) += bpck6.o
--
Ondrej Zary
Powered by blists - more mailing lists