lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKdAkRQT_Jk5yBeMZqh=M1JscVLFieZTQjLGOGxy8nHh8SnD3A@mail.gmail.com>
Date:   Tue, 31 Jan 2023 15:52:55 -0800
From:   Dmitry Torokhov <dmitry.torokhov@...il.com>
To:     Arnd Bergmann <arnd@...nel.org>
Cc:     Alexander Aring <alex.aring@...il.com>,
        Stefan Schmidt <stefan@...enfreihafen.org>,
        Arnd Bergmann <arnd@...db.de>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org,
        linux-wpan@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [PATCH] [v2] at86rf230: convert to gpio descriptors

Hi Arnd,

On Thu, Jan 26, 2023 at 8:32 AM Arnd Bergmann <arnd@...nel.org> wrote:
>
>         /* Reset */
> -       if (gpio_is_valid(rstn)) {
> +       if (rstn) {
>                 udelay(1);
> -               gpio_set_value_cansleep(rstn, 0);
> +               gpiod_set_value_cansleep(rstn, 0);
>                 udelay(1);
> -               gpio_set_value_cansleep(rstn, 1);
> +               gpiod_set_value_cansleep(rstn, 1);

For gpiod conversions, if we are not willing to chase whether existing
DTSes specify polarities
properly and create workarounds in case they are wrong, we should use
gpiod_set_raw_value*()
(my preference would be to do the work and not use "raw" variants).

In this particular case, arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
defines reset line as active low,
so you are leaving the device in reset state.

Please review your other conversion patches.

-- 
Dmitry

Powered by blists - more mailing lists