| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+icZUXinB=QCSEkhsaL2Ry1F7mKYKWmd0-jvuQseFohZ7UhpA@mail.gmail.com>
Date: Tue, 31 Jan 2023 07:20:42 +0100
From: Sedat Dilek <sedat.dilek@...il.com>
To: Ian Rogers <irogers@...gle.com>
Cc: "Liang, Kan" <kan.liang@...ux.intel.com>,
"Xing, Zhengjun" <zhengjun.xing@...el.com>,
Arnaldo Carvalho de Melo <acme@...hat.com>,
Peter Zijlstra <peterz@...radead.org>,
Ingo Molnar <mingo@...hat.com>,
Mark Rutland <mark.rutland@....com>,
Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
Jiri Olsa <jolsa@...nel.org>,
Namhyung Kim <namhyung@...nel.org>,
linux-perf-users@...r.kernel.org, linux-kernel@...r.kernel.org,
Nick Desaulniers <ndesaulniers@...gle.com>,
Nathan Chancellor <natechancellor@...il.com>,
llvm@...ts.linux.dev, Ben Hutchings <benh@...ian.org>,
James Clark <james.clark@....com>,
Stephane Eranian <eranian@...gle.com>
Subject: Re: [6.1.7][6.2-rc5] perf all metrics test: FAILED!
On Tue, Jan 31, 2023 at 7:14 AM Sedat Dilek <sedat.dilek@...il.com> wrote:
>
> On Tue, Jan 31, 2023 at 4:55 AM Ian Rogers <irogers@...gle.com> wrote:
> >
> > On Mon, Jan 30, 2023 at 7:45 PM Sedat Dilek <sedat.dilek@...il.com> wrote:
> > >
> > > On Tue, Jan 31, 2023 at 1:20 AM Ian Rogers <irogers@...gle.com> wrote:
> > > >
> > > > On Mon, Jan 30, 2023 at 2:04 AM James Clark <james.clark@....com> wrote:
> > > > >
> > > > >
> > > > >
> > > > > On 30/01/2023 02:24, Sedat Dilek wrote:
> > > > > > ?
> > > > > >
> > > > > > On Mon, Jan 30, 2023 at 12:21 AM Ian Rogers <irogers@...gle.com> wrote:
> > > > > >>
> > > > > >> On Sun, Jan 29, 2023 at 1:59 AM Sedat Dilek <sedat.dilek@...il.com> wrote:
> > > > > >>>
> > > > > >>> [ CC LLVM linux folks + Ben from Debian kernel team ]
> > > > > >>>
> > > > > >>> Hi,
> > > > > >>>
> > > > > >>> I am playing with LLVM version 16.0.0-rc1 which was released yesterday and PERF.
> > > > > >>>
> > > > > >>> After building my selfmade LLVM toolchain, I built perf and run some
> > > > > >>> perf tests here on my Intel SandyBridge CPU (details see below).
> > > > > >>>
> > > > > >>> perf all metrics test: FAILED!
> > > > > >>>
> > > > > >>> ...with both Debian's perf version 6.1.7 and my selfmade version 6.2-rc5.
> > > > > >>>
> > > > > >>> Just noticed:
> > > > > >>>
> > > > > >>> Couldn't bump rlimit(MEMLOCK), failures may take place when creating
> > > > > >>> BPF maps, etc
> > > > > >>>
> > > > > >>> Run the below tests with `sudo` - made this go away - still FAILED.
> > > > > >>>
> > > > > >>> But maybe I am missing to activate some sysfs/debug or whatever other stuff?
> > > > > >>
> > > > > >> Hi Sedat,
> > > > > >>
> > > > > >> things have been improving wrt metrics and so this failure may have
> > > > > >> just been because of the addition of a previously missing metric. The
> > > > > >> rlimit thing shouldn't affect things but maybe file descriptors?
> > > > > >> Looking at the test output the issue is:
> > > > > >>
> > > > > >> ```
> > > > > >> Metric 'tma_dram_bound' not printed in:
> > > > > >> # Running 'internals/synthesize' benchmark:
> > > > > >> Computing performance of single threaded perf event synthesis by
> > > > > >> synthesizing events on the perf process itself:
> > > > > >> Average synthesis took: 207.680 usec (+- 0.176 usec)
> > > > > >> Average num. events: 30.000 (+- 0.000)
> > > > > >> Average time per event 6.923 usec
> > > > > >> Average data synthesis took: 217.833 usec (+- 0.202 usec)
> > > > > >> Average num. events: 161.000 (+- 0.000)
> > > > > >> Average time per event 1.353 usec
> > > > > >>
> > > > > >> Performance counter stats for 'perf bench internals synthesize':
> > > > > >>
> > > > > >> <not counted> MEM_LOAD_UOPS_RETIRED.LLC_HIT
> > > > > >> (0,00%)
> > > > > >> <not counted> CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > > > >> (0,00%)
> > > > > >> <not counted> CPU_CLK_UNHALTED.THREAD
> > > > > >> (0,00%)
> > > > > >> <not counted> MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
> > > > > >> (0,00%)
> > > > > >> ```
> > > > > >>
> > > > > >> So the test was checking to see whether the tma_dram_bound metric
> > > > > >> could be computed on your Sandybridge and it failed. The event counts
> > > > > >> below show that every event came back "<not counted>" which is usually
> > > > > >> indicative of a permissions problem - it is also not surprising given
> > > > > >> this that the metric wasn't computed. You could try repeating the
> > > > > >> command the test is trying with something like "perf stat -M
> > > > > >> tma_dram_bound -a sleep 1", but running as root should have resolved
> > > > > >> that issue. Does that give you enough to keep exploring?
> > > > > >>
> > > > > >
> > > > > > Hi Ian,
> > > > > >
> > > > > > Thanks for your feedback!
> > > > > >
> > > > > > I booted into my Debian kernel - just to see what happens.
> > > > > >
> > > > > > # cat /proc/version
> > > > > > Linux version 6.1.0-2-amd64 (debian-kernel@...ts.debian.org) (gcc-12
> > > > > > (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1
> > > > > > SMP PREEMPT_DYNAMIC Debian 6.1.7-1 (2023-01-18)
> > > > > >
> > > > > > All things run as root...
> > > > > >
> > > > > > # echo 0 | tee /proc/sys/kernel/kptr_restrict
> > > > > > /proc/sys/kernel/perf_event_paranoid
> > > > > > 0
> > > > > >
> > > > > > # /usr/bin/perf test 10 92 98 99 100 101
> > > > > > 10: PMU events :
> > > > > > 10.1: PMU event table sanity : Ok
> > > > > > 10.2: PMU event map aliases : Ok
> > > > > > 10.3: Parsing of PMU event table metrics : Ok
> > > > > > 10.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > > > > > 92: perf record tests : Ok
> > > > > > 98: perf stat tests : Ok
> > > > > > 99: perf all metricgroups test : Ok
> > > > > > 100: perf all metrics test : FAILED!
> > > > > > 101: perf all PMU test : Ok
> > > > > >
> > > > > > # perf stat -M tma_dram_bound -a sleep 1
> > > > > >
> > > > > > Performance counter stats for 'system wide':
> > > > > >
> > > > > > <not counted> MEM_LOAD_UOPS_RETIRED.LLC_HIT
> > > > > > (0,00%)
> > > > > > <not counted> CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > > > > (0,00%)
> > > > > > <not counted> CPU_CLK_UNHALTED.THREAD
> > > > > > (0,00%)
> > > > > > <not counted> MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
> > > > > > (0,00%)
> > > > > >
> > > > >
> > > > > Hi Sedat,
> > > > >
> > > > > I also had this failure and did a git bisect, but it led me to the
> > > > > conclusion that it is a stale build issue rather than a regression.
> > > > >
> > > > > There was a recent commit that renamed/removed some json PMU files which
> > > > > the build system can't cope with. I think the tests end up iterating
> > > > > over a different set of event names than were generated by the build system.
> > > > >
> > > > > If you do a clean build the issue should go away. I don't know if there
> > > > > is anything more we can do to stop this from happening.
> > > > >
> > > > > James
> > > >
> > > > So I think this is a kernel bug triggering a perf tool bug. The kernel
> > > > bug can be worked around in the perf tool. I only had an Ivybridge to
> > > > test with (hence slightly different events) but what I see is both
> > > > tma_dram_bound and tma_l3_bound using the same 4 events. I could work
> > > > around the "<not counted>" by adding the --metric-no-group flag:
> > > >
> > > > ```
> > > > $ perf stat -M tma_l3_bound --metric-no-group -a sleep 1
> > > >
> > > > Performance counter stats for 'system wide':
> > > >
> > > > 400,404 MEM_LOAD_UOPS_RETIRED.LLC_HIT # 4.3 %
> > > > tma_l3_bound (74.99%)
> > > > 128,937,891 CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > > (87.46%)
> > > > 167,459 MEM_LOAD_UOPS_RETIRED.LLC_MISS
> > > > (74.99%)
> > > > 759,574,967 CPU_CLK_UNHALTED.THREAD
> > > > (87.47%)
> > > >
> > > > 1.001526438 seconds time elapsed
> > > >
> > > > $ perf stat -M tma_dram_bound -a --metric-no-group sleep 1
> > > >
> > > > Performance counter stats for 'system wide':
> > > >
> > > > 259,954 MEM_LOAD_UOPS_RETIRED.LLC_HIT # 15.2 %
> > > > tma_dram_bound (74.99%)
> > > > 118,807,043 CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > > (87.46%)
> > > > 111,699 MEM_LOAD_UOPS_RETIRED.LLC_MISS
> > > > (74.95%)
> > > > 587,571,060 CPU_CLK_UNHALTED.THREAD
> > > > (87.45%)
> > > >
> > > > 1.001518093 seconds time elapsed
> > > > ```
> > > >
> > > > The issue is that perf metrics use weak groups of events. A weak group
> > > > is the same as a group of events initially. We want to use groups of
> > > > events with metrics so that all the counters are scheduled in and out
> > > > at the same time, and not multiplexed independently. Imagine measuring
> > > > IPC but the counts for instructions and cycles are measured at
> > > > different periods, the resultant IPC value would be unlikely to be
> > > > accurate. If perf_event_open fails then the perf tool retries the
> > > > events without the group. If I try just 3 of the events in a weak
> > > > group then the failure can be seen:
> > > >
> > > > ```
> > > > $ perf stat -e "{MEM_LOAD_UOPS_RETIRED.LLC_HIT,MEM_LOAD_UOPS_RETIRED.LLC_MISS,CYCLE_ACTIVITY.STALLS_L2_PENDING}:W"
> > > > -a sleep 1
> > > >
> > > > Performance counter stats for 'system wide':
> > > >
> > > > <not counted> MEM_LOAD_UOPS_RETIRED.LLC_HIT
> > > > (0.00%)
> > > > <not counted> MEM_LOAD_UOPS_RETIRED.LLC_MISS
> > > > (0.00%)
> > > > <not counted> CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > > (0.00%)
> > > >
> > > > 1.001458485 seconds time elapsed
> > > > ```
> > > >
> > > > The kernel should have failed the perf_event_open on opening the third
> > > > event and then measured without the group, which it can do with
> > > > multiplexing as in the following:
> > > >
> > > > ```
> > > > $ perf stat -e "MEM_LOAD_UOPS_RETIRED.LLC_HIT,MEM_LOAD_UOPS_RETIRED.LLC_MISS,CYCLE_ACTIVITY.STALLS_L2_PENDING"
> > > > -a sleep 1
> > > >
> > > > Performance counter stats for 'system wide':
> > > >
> > > > 1,239,397 MEM_LOAD_UOPS_RETIRED.LLC_HIT
> > > > (79.06%)
> > > > 174,826 MEM_LOAD_UOPS_RETIRED.LLC_MISS
> > > > (64.60%)
> > > > 124,026,024 CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > > (81.16%)
> > > >
> > > > 1.001483434 seconds time elapsed
> > > > ```
> > > >
> > > > When the --metric-no-group flag is given to perf then it doesn't
> > > > produce the initial weak group, which works around the bug of the
> > > > kernel not failing on the 3rd perf_event_open. I've added Kan and
> > > > Zhengjun to the e-mail as they work on the Intel kernel PMU code.
> > > >
> > > > There's a question about what we should do in the perf test about
> > > > this? I have a few solutions:
> > > >
> > > > 1) try metric tests again with the --metric-no-group flag and don't
> > > > fail the test if this succeeds. This allows kernel bugs to hide, so
> > > > I'm not a huge fan.
> > > >
> > > > 2) add a new metric flag/constraint to say not to group, this way the
> > > > metric will automatically apply the "--metric-no-group" flag. It is a
> > > > bit of work to wire this up but this kind of failure is common enough
> > > > in PMUs that it is probably worthwhile. We also need to add the flag
> > > > to metrics and I'm not sure how to get a good list of the metrics that
> > > > currently fail and require it. This is okay but error prone.
> > > >
> > > > 3) fix the kernel bug and let the perf test fail until an adequate
> > > > kernel is installed. Probably the best option.
> > > >
> > >
> > > Hi Ian,
> > >
> > > I can confirm:
> > >
> > > $ echo 0 | sudo tee /proc/sys/kernel/kptr_restrict
> > > /proc/sys/kernel/perf_event_paranoid
> > > 0
> > >
> > > $ ~/bin/perf stat -M tma_l3_bound --metric-no-group -a sleep 1
> > >
> > > Performance counter stats for 'system wide':
> > >
> > > 2.058.892 MEM_LOAD_UOPS_RETIRED.LLC_HIT # 1,5 %
> > > tma_l3_bound (99,30%)
> > > 173.254.697 CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > (99,10%)
> > > 2.396.130.501 CPU_CLK_UNHALTED.THREAD
> > > (99,60%)
> > > 1.110.486 MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
> > > (99,53%)
> > >
> > > 1,001989022 seconds time elapsed
> > >
> > > $ ~/bin/perf stat -M tma_dram_bound --metric-no-group -a sleep 1
> > >
> > > Performance counter stats for 'system wide':
> > >
> > > 1.729.208 MEM_LOAD_UOPS_RETIRED.LLC_HIT # 1,2 %
> > > tma_dram_bound (99,50%)
> > > 50.346.734 CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > (99,50%)
> > > 2.354.963.862 CPU_CLK_UNHALTED.THREAD
> > > (99,80%)
> > > 306.500 MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
> > > (99,61%)
> > >
> > > 1,001981392 seconds time elapsed
> > >
> > > Thanks!
> >
> > Thanks, apparently it is an issue with SandyBridge/IvyBridge that some
> > counters on one hyperthread will limit what can be on the other. I
> > believe that's the comment related to EXCL access here:
> > https://github.com/torvalds/linux/blob/master/arch/x86/events/intel/core.c#L124
> > So you may have more success with the metric if you disable
> > hyperthreading, but I imagine that's not a popular option.
> >
>
> Hi Ian,
>
> LOL.
>
> Yesterday, I played a bit with perf... and did some research.
>
> I was thinking more of the "formula" in the metrics calculation is
> somehow BROKEN (not executed properly).
>
> The first thing to fix the issue was to recompile perf with throwing
> out the blocks in snb-metrics JSON file containing the two tests.
>
> AFFAICS, stackoverflow or wherever I found something about haswell vs.
> sandy bridge and topic "SMT / HT (hyper-threading)".
> That's why my initial LOL...
>
> I am not in front of my Linux machine, I guess it was...
>
> Link: https://stackoverflow.com/questions/33677367/understanding-cycle-activity-haswell-performance-monitoring-events
>
To quote from the above Link:
> There are three important differences:
>
> Some of the Haswell events can only valid when HT is disabled. All SNB events are valid even when HT is enabled.
>
> CYCLE_ACTIVITY.STALLS_L2_PENDING on HSW counts the number of load misses at L2, but on SNB, it counts the number of cycles during which there was at least one demand load miss at L2.
>
> The HSW events include all accesses, not just demand loads. In contrast, the SNB events only occur for demand loads.
-Sedat-
> Hope I have not to disable HT in my BIOS before running these tests.
> Can I do this in runtime (proc / sysfs / etc.)?
>
> Furthermore, I passed * mitigations=off * as kernel-boot-parameter for
> testing purposes.
> ( I wanted to test it for a long time - independent of this issue. )
>
> Of course, I played with perf -e
> MEM_LOAD_UOPS_RETIRED.LLC_HIT,MEM_LOAD_UOPS_RETIRED.LLC_MISS,CYCLE_ACTIVITY.STALLS_L2_PENDING
> ... (comma-separated, no "...", no {...}), passing -C 1 (number of
> CPUs), etc.
> Had to check my bash-history...
>
> Again as noone explained:
>
> Control descriptor is not initialized
>
> In some tests I have seen this (all with passing -v or -vv for more
> verbosity) - in some not.
>
> Worth reading: Brendan Gregg's Homepage!
>
> https://www.brendangregg.com/linuxperf.html
>
> https://www.brendangregg.com/perf.html
>
> Thanks Ian for digging into this!
>
> If you have any news or anything for testing, please let me know.
>
> BR,
> -Sedat-
>
> >
> > > BR,
> > > -Sedat-
> > >
> > > > Thanks,
> > > > Ian
> > > >
> > > > > > 1,002148600 seconds time elapsed
> > > > > >
> > > > > > Hmm... looking at... Metric 'tma_l3_bound' ...
> > > > > >
> > > > > > Running...
> > > > > >
> > > > > > # perf stat --verbose -M tma_l3_bound -a sleep 1
> > > > > > Using CPUID GenuineIntel-6-2A-7
> > > > > > metric expr (MEM_LOAD_UOPS_RETIRED.LLC_HIT /
> > > > > > (MEM_LOAD_UOPS_RETIRED.LLC_HIT + 7 *
> > > > > > MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS)) *
> > > > > > CYCLE_ACTIVITY.STALLS_L2_PENDING / CLKS for tma_l3_bound
> > > > > > metric expr CPU_CLK_UNHALTED.THREAD for CLKS
> > > > > >
> > > > > > found event MEM_LOAD_UOPS_RETIRED.LLC_HIT
> > > > > > found event CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > > > > found event CPU_CLK_UNHALTED.THREAD
> > > > > > found event MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
> > > > > >
> > > > > > Parsing metric events
> > > > > > '{MEM_LOAD_UOPS_RETIRED.LLC_HIT/metric-id=MEM_LOAD_UOPS_RETIRED.LLC_HIT/,CYCLE_ACTIVITY.STALLS_L2_PENDING/metric-id=CYCLE_ACTIVITY.STALLS_L2_PEND
> > > > > > ING/,CPU_CLK_UNHALTED.THREAD/metric-id=CPU_CLK_UNHALTED.THREAD/,MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS/metric-id=MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS/}:W'
> > > > > > MEM_LOAD_UOPS_RETIRED.LLC_HIT -> cpu/event=0xd1,period=0xc365,umask=0x4/
> > > > > > CYCLE_ACTIVITY.STALLS_L2_PENDING ->
> > > > > > cpu/event=0xa3,cmask=0x5,period=0x1e8483,umask=0x5/
> > > > > > CPU_CLK_UNHALTED.THREAD -> cpu/event=0x3c,period=0x1e8483/
> > > > > > MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS -> cpu/event=0xd4,period=0x186a7,umask=0x2/
> > > > > >
> > > > > > Control descriptor is not initialized
> > > > > >
> > > > > > MEM_LOAD_UOPS_RETIRED.LLC_HIT: 0 4007421228 0
> > > > > > CYCLE_ACTIVITY.STALLS_L2_PENDING: 0 4007421228 0
> > > > > > CPU_CLK_UNHALTED.THREAD: 0 4007421228 0
> > > > > > MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS: 0 4007421228 0
> > > > > >
> > > > > > Performance counter stats for 'system wide':
> > > > > >
> > > > > > <not counted> MEM_LOAD_UOPS_RETIRED.LLC_HIT
> > > > > > (0,00%)
> > > > > > <not counted> CYCLE_ACTIVITY.STALLS_L2_PENDING
> > > > > > (0,00%)
> > > > > > <not counted> CPU_CLK_UNHALTED.THREAD
> > > > > > (0,00%)
> > > > > > <not counted> MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
> > > > > > (0,00%)
> > > > > >
> > > > > > 1,002310013 seconds time elapsed
> > > > > >
> > > > > > So those events/metric-ids resulting in "<not counted>" are all found.
> > > > > >
> > > > > > What means "Control descriptor is not initialized"?
> > > > > >
> > > > > > To summarize:
> > > > > >
> > > > > > Those two tests in "100: perf all metrics test" FAILED:
> > > > > >
> > > > > > 1. tma_dram_bound
> > > > > > 2. tma_l3_bound
> > > > > >
> > > > > > Best regards,
> > > > > > -Sedat-
> > > > > >
> > > > > >> Thanks,
> > > > > >> Ian
> > > > > >>
> > > > > >>> Last perf version which was OK:
> > > > > >>>
> > > > > >>> ~/bin/perf -v
> > > > > >>> perf version 6.0.0
> > > > > >>>
> > > > > >>> echo "linux-perf: Adjust limited access to performance monitoring and
> > > > > >>> observability operations"
> > > > > >>> echo 0 | sudo tee /proc/sys/kernel/kptr_restrict
> > > > > >>> /proc/sys/kernel/perf_event_paranoid
> > > > > >>> 0
> > > > > >>>
> > > > > >>> ~/bin/perf test 10 86 92 93 94 95
> > > > > >>> 10: PMU events :
> > > > > >>> 10.1: PMU event table sanity : Ok
> > > > > >>> 10.2: PMU event map aliases : Ok
> > > > > >>> 10.3: Parsing of PMU event table metrics : Ok
> > > > > >>> 10.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > > > > >>> 86: perf record tests : Ok
> > > > > >>> 92: perf stat tests : Ok
> > > > > >>> 93: perf all metricgroups test : Ok
> > > > > >>> 94: perf all metrics test : Ok
> > > > > >>> 95: perf all PMU test : Ok
> > > > > >>>
> > > > > >>> echo 1 | sudo tee /proc/sys/kernel/kptr_restrict
> > > > > >>> /proc/sys/kernel/perf_event_paranoid
> > > > > >>> echo "linux-perf: Reset limited access to performance monitoring and
> > > > > >>> observability operations"
> > > > > >>>
> > > > > >>> If you need further information, please let me know.
> > > > > >>>
> > > > > >>> Thanks.
> > > > > >>>
> > > > > >>> Regards,
> > > > > >>> -Sedat-
> > > > > >>>
> > > > > >>> P.S. Instructions
> > > > > >>>
> > > > > >>> [ REPRODUCER ]
> > > > > >>>
> > > > > >>> LLVM_MVER="16"
> > > > > >>>
> > > > > >>> # Debian LLVM
> > > > > >>> ##LLVM_TOOLCHAIN_PATH="/usr/lib/llvm-${LLVM_MVER}/bin"
> > > > > >>> # Selfmade LLVM
> > > > > >>> LLVM_TOOLCHAIN_PATH="/opt/llvm/bin"
> > > > > >>> if [ -d ${LLVM_TOOLCHAIN_PATH} ]; then
> > > > > >>> export PATH="${LLVM_TOOLCHAIN_PATH}:${PATH}"
> > > > > >>> fi
> > > > > >>>
> > > > > >>> PYTHON_VER="3.11"
> > > > > >>> MAKE="make"
> > > > > >>> MAKE_OPTS="V=1 -j1 HOSTCC=clang-$LLVM_MVER HOSTLD=ld.lld
> > > > > >>> HOSTAR=llvm-ar CC=clang-$LLVM_MVER LD=ld.lld AR=llvm-ar
> > > > > >>> STRIP=llvm-strip"
> > > > > >>>
> > > > > >>> echo "LLVM MVER ........ $LLVM_MVER"
> > > > > >>> echo "Path settings .... $PATH"
> > > > > >>> echo "Python version ... $PYTHON_VER"
> > > > > >>> echo "make line ........ $MAKE $MAKE_OPTS"
> > > > > >>>
> > > > > >>> LANG=C LC_ALL=C make -C tools/perf clean 2>&1 | tee ../make-log_perf-clean.txt
> > > > > >>>
> > > > > >>> LANG=C LC_ALL=C $MAKE $MAKE_OPTS -C tools/perf
> > > > > >>> PYTHON=python${PYTHON_VER} install-bin 2>&1 | tee
> > > > > >>> ../make-log_perf-install_bin_python${PYTHON_VER}_llvm${LLVM_MVER}.txt
> > > > > >>>
> > > > > >>>
> > > > > >>> [ TESTS ]
> > > > > >>>
> > > > > >>> [ TESTS - START ]
> > > > > >>>
> > > > > >>> echo 0 | sudo tee /proc/sys/kernel/kptr_restrict
> > > > > >>> /proc/sys/kernel/perf_event_paranoid
> > > > > >>>
> > > > > >>> [ TESTS - DEBIAN ]
> > > > > >>>
> > > > > >>> /usr/bin/perf -v
> > > > > >>> perf version 6.1.7
> > > > > >>>
> > > > > >>> /usr/bin/perf test 10 92 98 99 100 101
> > > > > >>>
> > > > > >>> 10: PMU events :
> > > > > >>> 10.1: PMU event table sanity : Ok
> > > > > >>> 10.2: PMU event map aliases : Ok
> > > > > >>> 10.3: Parsing of PMU event table metrics : Ok
> > > > > >>> 10.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > > > > >>> 92: perf record tests : Ok
> > > > > >>> 98: perf stat tests : Ok
> > > > > >>> 99: perf all metricgroups test : Ok
> > > > > >>> 100: perf all metrics test : FAILED!
> > > > > >>> 101: perf all PMU test : Ok
> > > > > >>>
> > > > > >>> [ TESTS - DILEKS ]
> > > > > >>>
> > > > > >>> ~/bin/perf -v
> > > > > >>> perf version 6.2.0-rc5
> > > > > >>>
> > > > > >>> ~/bin/perf test 7 87 93 94 95 96
> > > > > >>>
> > > > > >>> 7: PMU events :
> > > > > >>> 7.1: PMU event table sanity : Ok
> > > > > >>> 7.2: PMU event map aliases : Ok
> > > > > >>> 7.3: Parsing of PMU event table metrics : Ok
> > > > > >>> 7.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > > > > >>> 87: perf record tests : Ok
> > > > > >>> 93: perf stat tests : Ok
> > > > > >>> 94: perf all metricgroups test : Ok
> > > > > >>> 95: perf all metrics test : FAILED!
> > > > > >>> 96: perf all PMU test : Ok
> > > > > >>>
> > > > > >>> [ TESTS - FAILED ]
> > > > > >>>
> > > > > >>> /usr/bin/perf test --verbose 100 2>&1 | tee
> > > > > >>> perf-test-verbose-100-perf-all-metrics-test_debian-perf-6-1-7.txt
> > > > > >>>
> > > > > >>> ~/bin/perf test --verbose 95 2>&1 | tee
> > > > > >>> perf-test-verbose-95-perf-all-metrics-test_dileks-perf-6-2-rc5.txt
> > > > > >>>
> > > > > >>> [ TESTS - STOP ]
> > > > > >>>
> > > > > >>> echo 1 | sudo tee /proc/sys/kernel/kptr_restrict
> > > > > >>> /proc/sys/kernel/perf_event_paranoid
> > > > > >>>
> > > > > >>> - EOT -
Powered by blists - more mailing lists