[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230131090016.3970625-9-perry.yuan@amd.com>
Date: Tue, 31 Jan 2023 17:00:13 +0800
From: Perry Yuan <perry.yuan@....com>
To: <rafael.j.wysocki@...el.com>, <Mario.Limonciello@....com>,
<ray.huang@....com>, <viresh.kumar@...aro.org>
CC: <Deepak.Sharma@....com>, <Nathan.Fontenot@....com>,
<Alexander.Deucher@....com>, <Shimmer.Huang@....com>,
<Xiaojian.Du@....com>, <Li.Meng@....com>, <wyes.karny@....com>,
<linux-pm@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v12 08/11] Documentation: amd-pstate: add amd pstate driver mode introduction
From: Perry Yuan <Perry.Yuan@....com>
The amd-pstate driver has two operation modes supported:
* CPPC Autonomous (active) mode
* CPPC non-autonomous (passive) mode.
active mode and passive mode can be chosen by different kernel parameters.
Acked-by: Huang Rui <ray.huang@....com>
Reviewed-by: Mario Limonciello <mario.limonciello@....com>
Reviewed-by: Wyes Karny <wyes.karny@....com>
Tested-by: Wyes Karny <wyes.karny@....com>
Signed-off-by: Perry Yuan <Perry.Yuan@....com>
---
Documentation/admin-guide/pm/amd-pstate.rst | 26 +++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
index 98a2bb44f80c..b6aee69f564f 100644
--- a/Documentation/admin-guide/pm/amd-pstate.rst
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -299,8 +299,30 @@ module which supports the new AMD P-States mechanism on most of the future AMD
platforms. The AMD P-States mechanism is the more performance and energy
efficiency frequency management method on AMD processors.
-Kernel Module Options for ``amd-pstate``
-=========================================
+
+AMD Pstate Driver Operation Modes
+=================================
+
+``amd_pstate`` CPPC has two operation modes: CPPC Autonomous(active) mode and
+CPPC non-autonomous(passive) mode.
+active mode and passive mode can be chosen by different kernel parameters.
+When in Autonomous mode, CPPC ignores requests done in the Desired Performance
+Target register and takes into account only the values set to the Minimum requested
+performance, Maximum requested performance, and Energy Performance Preference
+registers. When Autonomous is disabled, it only considers the Desired Performance Target.
+
+Active Mode
+------------
+
+``amd_pstate=active``
+
+This is the low-level firmware control mode which is implemented by ``amd_pstate_epp``
+driver with ``amd_pstate=active`` passed to the kernel in the command line.
+In this mode, ``amd_pstate_epp`` driver provides a hint to the hardware if software
+wants to bias toward performance (0x0) or energy efficiency (0xff) to the CPPC firmware.
+then CPPC power algorithm will calculate the runtime workload and adjust the realtime
+cores frequency according to the power supply and thermal, core voltage and some other
+hardware conditions.
Passive Mode
------------
--
2.34.1
Powered by blists - more mailing lists