linux-kernel - Re: [PATCH v2 2/2] pwm: sifive: change the PWM controlled LED algorithm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAHh=Yk_hFOjwY1mbmYk8yqH_AKDs1_3J+5pYQStseNsZukPSoA@mail.gmail.com>
Date:   Wed, 1 Feb 2023 16:56:42 +0800
From:   Nylon Chen <nylon.chen@...ive.com>
To:     Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>
Cc:     aou@...s.berkeley.edu, conor@...nel.org,
        emil.renner.berthing@...onical.com, geert+renesas@...der.be,
        heiko@...ech.de, krzysztof.kozlowski+dt@...aro.org,
        palmer@...belt.com, paul.walmsley@...ive.com, robh+dt@...nel.org,
        thierry.reding@...il.com, devicetree@...r.kernel.org,
        linux-pwm@...r.kernel.org, linux-riscv@...ts.infradead.org,
        linux-kernel@...r.kernel.org, nylon7717@...il.com,
        zong.li@...ive.com, greentime.hu@...ive.com,
        vincent.chen@...ive.com
Subject: Re: [PATCH v2 2/2] pwm: sifive: change the PWM controlled LED algorithm

Hi Uwe,

Thanks for your reply.

Uwe Kleine-König <u.kleine-koenig@...gutronix.de> 於 2023年1月30日 週一 下午6:17寫道：
>
> On Mon, Jan 30, 2023 at 05:32:29PM +0800, Nylon Chen wrote:
> > The `frac` variable represents the pulse inactive time, and the result of
> > this algorithm is the pulse active time. Therefore, we must reverse the
> > result.
> >
> > The reference is SiFive FU740-C000 Manual[0].
> >
> > [0]: https://sifive.cdn.prismic.io/sifive/1a82e600-1f93-4f41-b2d8-86ed8b16acba_fu740-c000-manual-v1p6.pdf
> >
> > Signed-off-by: Nylon Chen <nylon.chen@...ive.com>
> > ---
> >  drivers/pwm/pwm-sifive.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c
> > index 62b6acc6373d..a5eda165d071 100644
> > --- a/drivers/pwm/pwm-sifive.c
> > +++ b/drivers/pwm/pwm-sifive.c
> > @@ -158,6 +158,7 @@ static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> >       frac = DIV64_U64_ROUND_CLOSEST(num, state->period);
> >       /* The hardware cannot generate a 100% duty cycle */
> >       frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1);
> > +     frac = (1U << PWM_SIFIVE_CMPWIDTH) - 1 - frac;
>
> The same problem exists in pwm_sifive_get_state(), doesn't it?
>
> As fixing this is an interruptive change anyhow, this is the opportunity
> to align the driver to the rules tested by PWM_DEBUG.
>
> The problems I see in the driver (only checked quickly, so I might be
> wrong):
>
>  - state->period != ddata->approx_period isn't necessarily a problem. If
>    state->period > ddata->real_period that's fine and the driver should
>    continue
>
>  - frac = DIV64_U64_ROUND_CLOSEST(num, state->period);
>    is wrong for two reasons:
>    it should round down and use the real period.
>
I need a little time to clarify your assumptions. If possible, I will
make similar changes.

e.g.
rounddown(num, state->period);
if (state->period < ddata->approx_period)
    ...

thanks a lot.






> Best regards
> Uwe
>
> --
> Pengutronix e.K.                           | Uwe Kleine-König            |
> Industrial Linux Solutions                 | https://www.pengutronix.de/ |