| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230201153019.269718-7-krzysztof.kozlowski@linaro.org>
Date: Wed, 1 Feb 2023 16:30:19 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Stephan Gerhold <stephan@...hold.net>,
Richard Acayan <mailingradian@...il.com>,
Vinod Koul <vkoul@...nel.org>,
krishna Lanka <quic_vamslank@...cinc.com>,
Iskren Chernev <me@...ren.info>,
Martin Botka <martin.botka@...ainline.org>,
Abel Vesa <abel.vesa@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 7/7] dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
Correct the number of GPIOs in gpio-ranges to match reality.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml | 2 +-
.../devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml | 2 +-
Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml | 2 +-
.../devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml | 2 +-
Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml | 2 +-
Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml | 2 +-
Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml | 2 +-
Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml | 2 +-
.../devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml | 2 +-
Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml | 2 +-
Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
index f33792a1af6c..77a5aaefddbe 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
@@ -138,7 +138,7 @@ examples:
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 120>;
+ gpio-ranges = <&tlmm 0 0 119>;
wakeup-parent = <&pdc>;
dp_hot_plug_det: dp-hot-plug-det-state {
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index 97b27d6835e9..854bbb5b6f5d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -128,7 +128,7 @@ examples:
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 230>;
+ gpio-ranges = <&tlmm 0 0 228>;
gpio-wo-subnode-state {
pins = "gpio1";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
index f586b3aa138e..03c7b5c97599 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
@@ -119,7 +119,7 @@ examples:
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 151>;
+ gpio-ranges = <&tlmm 0 0 150>;
qup-i2c9-state {
pins = "gpio6", "gpio7";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
index 23d7c030fec0..a08e4557d8b7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
@@ -134,7 +134,7 @@ examples:
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 151>;
+ gpio-ranges = <&tlmm 0 0 150>;
wakeup-parent = <&pdc_intc>;
ap-suspend-l-hog {
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
index 89c5562583d1..96375f58fa22 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -140,7 +140,7 @@ examples:
reg = <0x03000000 0xdc2000>;
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 109>;
+ gpio-ranges = <&tlmm 0 0 108>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
index 29325483cd2b..d35db4f4581b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
@@ -121,7 +121,7 @@ examples:
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 114>;
+ gpio-ranges = <&tlmm 0 0 113>;
sdc2_on_state: sdc2-on-state {
clk-pins {
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
index c9bc4893e8e8..83848950cc3b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -125,7 +125,7 @@ examples:
reg-names = "west", "south", "east";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
- gpio-ranges = <&tlmm 0 0 134>;
+ gpio-ranges = <&tlmm 0 0 133>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
index d95935fcc8b5..3fe1f1668fbc 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
@@ -142,7 +142,7 @@ examples:
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 157>;
+ gpio-ranges = <&tlmm 0 0 156>;
gpio-wo-subnode-state {
pins = "gpio1";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
index 4376a9bd4d70..4c9ad9079e69 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
@@ -136,7 +136,7 @@ examples:
<0x03d00000 0x300000>;
reg-names = "west", "east", "north", "south";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-ranges = <&tlmm 0 0 176>;
+ gpio-ranges = <&tlmm 0 0 175>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
index 56c8046f1be0..c4cec40cbb92 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
@@ -124,7 +124,7 @@ examples:
reg = <0x0f100000 0x300000>;
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 211>;
+ gpio-ranges = <&tlmm 0 0 210>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
index a457425ba112..6ecc1ad6ccd4 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
@@ -136,7 +136,7 @@ examples:
reg = <0x0f100000 0x300000>;
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 211>;
+ gpio-ranges = <&tlmm 0 0 210>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
--
2.34.1
Powered by blists - more mailing lists