linux-kernel - Re: [PATCH 2/9] net: ethernet: mtk_eth

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 3 Feb 2023 23:48:44 +0200
From:   Vladimir Oltean <olteanv@...il.com>
To:     Daniel Golle <daniel@...rotopia.org>
Cc:     netdev@...r.kernel.org, linux-mediatek@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Russell King <linux@...linux.org.uk>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Lorenzo Bianconi <lorenzo@...nel.org>,
        Mark Lee <Mark-MC.Lee@...iatek.com>,
        John Crispin <john@...ozen.org>, Felix Fietkau <nbd@....name>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        DENG Qingfang <dqfext@...il.com>,
        Landen Chao <Landen.Chao@...iatek.com>,
        Sean Wang <sean.wang@...iatek.com>,
        Paolo Abeni <pabeni@...hat.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Eric Dumazet <edumazet@...gle.com>,
        "David S. Miller" <davem@...emloft.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Jianhui Zhao <zhaojh329@...il.com>,
        Bjørn Mork <bjorn@...k.no>
Subject: Re: [PATCH 2/9] net: ethernet: mtk_eth_soc: set MDIO bus clock
 frequency

On Fri, Feb 03, 2023 at 07:01:01AM +0000, Daniel Golle wrote:
> Set MDIO bus clock frequency and allow setting a custom maximum
> frequency from device tree.
> 
> Signed-off-by: Daniel Golle <daniel@...rotopia.org>
> ---
>  drivers/net/ethernet/mediatek/mtk_eth_soc.c | 25 +++++++++++++++++++++
>  drivers/net/ethernet/mediatek/mtk_eth_soc.h |  5 +++++
>  2 files changed, 30 insertions(+)
> 
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> index a44ffff48c7b..9050423821dc 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> @@ -790,7 +790,9 @@ static const struct phylink_mac_ops mtk_phylink_ops = {
>  static int mtk_mdio_init(struct mtk_eth *eth)
>  {
>  	struct device_node *mii_np;
> +	int clk = 25000000, max_clk = 2500000, divider = 1;

Would be good if constant values (clk) weren't put in variables.

>  	int ret;
> +	u32 val;
>  
>  	mii_np = of_get_child_by_name(eth->dev->of_node, "mdio-bus");
>  	if (!mii_np) {
> @@ -818,6 +820,29 @@ static int mtk_mdio_init(struct mtk_eth *eth)
>  	eth->mii_bus->parent = eth->dev;
>  
>  	snprintf(eth->mii_bus->id, MII_BUS_ID_SIZE, "%pOFn", mii_np);
> +
> +	if (!of_property_read_u32(mii_np, "clock-frequency", &val))
> +		max_clk = val;

Checking for valid range? There should also probably be a dt-bindings
patch for this.

> +
> +	while (clk / divider > max_clk) {
> +		if (divider >= 63)
> +			break;
> +
> +		divider++;
> +	};

uhm, "divider = min(DIV_ROUND_UP(25000000, max_clk), 63);"? I don't
think the compiler is smart enough to optimize away this loop.

> +
> +	val = mtk_r32(eth, MTK_PPSC);
> +	val |= PPSC_MDC_TURBO;
> +	mtk_w32(eth, val, MTK_PPSC);

What does "TURBO" do and why do you set it unconditionally?

> +
> +	/* Configure MDC Divider */
> +	val = mtk_r32(eth, MTK_PPSC);
> +	val &= ~PPSC_MDC_CFG;
> +	val |= FIELD_PREP(PPSC_MDC_CFG, divider);
> +	mtk_w32(eth, val, MTK_PPSC);
> +
> +	dev_dbg(eth->dev, "MDC is running on %d Hz\n", clk / divider);
> +
>  	ret = of_mdiobus_register(eth->mii_bus, mii_np);
>  
>  err_put_node:
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> index 7230dcb29315..724815ae18a0 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> @@ -363,6 +363,11 @@
>  #define RX_DMA_VTAG_V2		BIT(0)
>  #define RX_DMA_L4_VALID_V2	BIT(2)
>  
> +/* PHY Polling and SMI Master Control registers */
> +#define MTK_PPSC		0x10000
> +#define PPSC_MDC_CFG		GENMASK(29, 24)
> +#define PPSC_MDC_TURBO		BIT(20)
> +
>  /* PHY Indirect Access Control registers */
>  #define MTK_PHY_IAC		0x10004
>  #define PHY_IAC_ACCESS		BIT(31)
> -- 
> 2.39.1
>