[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230203034833.451461-1-durai.manickamkr@microchip.com>
Date: Fri, 3 Feb 2023 09:18:25 +0530
From: Durai Manickam KR <durai.manickamkr@...rochip.com>
To: <Hari.PrasathGE@...rochip.com>,
<balamanikandan.gunasundar@...rochip.com>,
<manikandan.m@...rochip.com>, <varshini.rajendran@...rochip.com>,
<dharma.b@...rochip.com>, <nayabbasha.sayed@...rochip.com>,
<balakrishnan.s@...rochip.com>, <claudiu.beznea@...rochip.com>,
<cristian.birsan@...rochip.com>, <nicolas.ferre@...rochip.com>,
<krzysztof.kozlowski@...aro.org>, <alexandre.belloni@...tlin.com>,
<davem@...emloft.net>, <arnd@...db.de>, <olof@...om.net>,
<soc@...nel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <Kavyasree.Kotagiri@...rochip.com>,
<Horatiu.Vultur@...rochip.com>, <robh+dt@...nel.org>,
<andrew@...n.ch>, <michael@...le.cc>, <jerry.ray@...rochip.com>
CC: Durai Manickam KR <durai.manickamkr@...rochip.com>
Subject: [PATCH v5 0/8] Add support for sam9x60 curiosity board
This series of patches is meant to address the following:
- Moving of flexcom definitions from board file to SoC file and
some minor changes to its properties.
- Add support for the new sam9x60 curiosity board based on the
existing sam9x60 SoC.
Changes in v5:
--------------
All the patches are accepted except the below patches which are
updated based on the comments receied on PATCH v4,
- [PATCH v4 2/8] Updated from field and first SOB as same author.
- [PATCH v4 2/8] Added the missing compatibles for the UART.
- [PATCH v4 8/8] Fixed the dtb warnings.
Changes in v4:
--------------
- Added the missed property atmel,usart-mode in uart5
- Renamed the led label.
Changes in v3:
--------------
- Updated commit logs mentioning each author's contribution.
- Author name is updated based on the linux mainline guidelines.
- updated the description file such that sam9x60 curiosity is
added together with sam9x60ek as an enum.
- Updated the entries in the regulator container alphabetically
sorted.
- Added label name and node name following the guidelines.
Changes in v2:
--------------
- Added generic names for regulator node.
- Removed the #addredd-cells and #size-cells property which shows
compilation warning.
- Removed the property "status=okay" as this is default.
- No underscores used for the pinctrl definitions and node names.
- Organised the patches in the logical way.
- Bindings are made separate patch.
Durai Manickam KR (3):
ARM: dts: at91: sam9x60: fix spi4 node
dt-bindings: arm: at91: Add info on sam9x60 curiosity
ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60
curiosity board
Manikandan Muralidharan (5):
ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom
functions
ARM: dts: at91: sam9x60: move flexcom definitions
ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes
ARM: dts: at91: sam9x60: Add missing flexcom definitions
.../devicetree/bindings/arm/atmel-at91.yaml | 6 +-
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sam9x60_curiosity.dts | 501 ++++++++++++++
arch/arm/boot/dts/at91-sam9x60ek.dts | 50 +-
arch/arm/boot/dts/sam9x60.dtsi | 622 ++++++++++++++++++
5 files changed, 1138 insertions(+), 42 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts
--
2.25.1
Powered by blists - more mailing lists