[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230203081807.2248625-11-abel.vesa@linaro.org>
Date: Fri, 3 Feb 2023 10:18:05 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
"vkoul@...nel.org" <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Johan Hovold <johan+linaro@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: [PATCH v7 10/12] PCI: qcom: Add SM8550 PCIe support
Add compatible for both PCIe found on SM8550.
Also add the cnoc_pcie_sf_axi clock needed by the SM8550.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Reviewed-by: Manivannan Sadhasivam <mani@...nel.org>
---
The v6 of this patchset is:
https://lore.kernel.org/all/20230202123902.3831491-11-abel.vesa@linaro.org/
Changes since v6:
* none
Changes since v5:
* none
Changes since v4:
* added Mani's R-b tag
Changes since v3:
* renamed cnoc_pcie_sf_axi to cnoc_sf_axi
Changes since v2:
* none
Changes since v1:
* changed the subject line prefix for the patch to match the history,
like Bjorn Helgaas suggested.
* added Konrad's R-b tag
drivers/pci/controller/dwc/pcie-qcom.c | 25 ++++++++++++++-----------
1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index a232b04af048..6a70c9c6f98d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -182,10 +182,10 @@ struct qcom_pcie_resources_2_3_3 {
/* 6 clocks typically, 7 for sm8250 */
struct qcom_pcie_resources_2_7_0 {
- struct clk_bulk_data clks[12];
+ struct clk_bulk_data clks[14];
int num_clks;
struct regulator_bulk_data supplies[2];
- struct reset_control *pci_reset;
+ struct reset_control *rst;
};
struct qcom_pcie_resources_2_9_0 {
@@ -1177,9 +1177,9 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
unsigned int idx;
int ret;
- res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
- if (IS_ERR(res->pci_reset))
- return PTR_ERR(res->pci_reset);
+ res->rst = devm_reset_control_array_get_exclusive(dev);
+ if (IS_ERR(res->rst))
+ return PTR_ERR(res->rst);
res->supplies[0].supply = "vdda";
res->supplies[1].supply = "vddpe-3v3";
@@ -1205,9 +1205,11 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
res->clks[idx++].id = "ddrss_sf_tbu";
res->clks[idx++].id = "aggre0";
res->clks[idx++].id = "aggre1";
+ res->clks[idx++].id = "noc_aggr";
res->clks[idx++].id = "noc_aggr_4";
res->clks[idx++].id = "noc_aggr_south_sf";
res->clks[idx++].id = "cnoc_qx";
+ res->clks[idx++].id = "cnoc_sf_axi";
num_opt_clks = idx - num_clks;
res->num_clks = idx;
@@ -1237,17 +1239,17 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
if (ret < 0)
goto err_disable_regulators;
- ret = reset_control_assert(res->pci_reset);
- if (ret < 0) {
- dev_err(dev, "cannot assert pci reset\n");
+ ret = reset_control_assert(res->rst);
+ if (ret) {
+ dev_err(dev, "reset assert failed (%d)\n", ret);
goto err_disable_clocks;
}
usleep_range(1000, 1500);
- ret = reset_control_deassert(res->pci_reset);
- if (ret < 0) {
- dev_err(dev, "cannot deassert pci reset\n");
+ ret = reset_control_deassert(res->rst);
+ if (ret) {
+ dev_err(dev, "reset deassert failed (%d)\n", ret);
goto err_disable_clocks;
}
@@ -1841,6 +1843,7 @@ static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-sm8350", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
+ { .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
{ }
};
--
2.34.1
Powered by blists - more mailing lists