[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y9zhc7Yhm6egRbwQ@jade>
Date: Fri, 3 Feb 2023 11:26:59 +0100
From: Jens Wiklander <jens.wiklander@...aro.org>
To: Etienne Carriere <etienne.carriere@...aro.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, Marc Zyngier <maz@...nel.org>,
Sumit Garg <sumit.garg@...aro.org>,
Pascal Paillet <p.paillet@...s.st.com>,
Fabrice Gasnier <fabrice.gasnier@...s.st.com>
Subject: Re: [PATCH v2 2/3] optee: multiplex tee interrupt events on optee
async notif irq
Hi Etienne,
On Tue, Jan 24, 2023 at 11:56:42AM +0100, Etienne Carriere wrote:
> Implements an irqchip in optee driver to relay interrupts notified
> from OP-TEE world to the Linux OS. Optee registers up to 1 interrupt
> controller and identifies each line with a line number from 0 to
> UINT16_MAX.
>
> Existing optee async notif uses an irq for OP-TEE to signal Linux of a
> pending event. The implementation binds each event (an async notif value)
> to the awaking of a waiting thread or the processing of some TEE
> background (bottom half) tasks to be scheduled. The interrupt
> notification service added by this change allows TEE to relay interrupt
> signals to Linux on secure interrupt occurrences where the end consumer
> of the signal lives in normal world.
>
> When optee driver initializes, it negotiates with the TEE whether
> interrupt notification is supported or not. The feature is enabled
> if both Linux kernel and OP-TEE support it.
>
> OP-TEE defines 2 SMC function IDs for non-secure world to control
> interrupt events.
>
> SMC function OPTEE_SMC_GET_NOTIF_IT allows non-secure world to
> retrieve pending interrupts by grapes up to 5 lines. The function also
> reports whether there are pending async values targeting suspended
> threaded sequences execution and whether TEE has background threaded
> work to do (async notif value 0 was retrieved).
>
> SMC function OPTEE_SMC_CONFIG_NOTIF_IT configures the insterrupt line
> for masking and enabling state and wakeup source.
>
> Cc: Jens Wiklander <jens.wiklander@...aro.org>
> Cc: Marc Zyngier <maz@...nel.org>
> Cc: Sumit Garg <sumit.garg@...aro.org>
>
> Co-developed-by: Pascal Paillet <p.paillet@...s.st.com>
> Signed-off-by: Pascal Paillet <p.paillet@...s.st.com>
> Co-developed-by: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
> Signed-off-by: Etienne Carriere <etienne.carriere@...aro.org>
> ---
> Changes since v1:
> - Removed dependency on optee per-cpu irq notification.
> - Change SMC function ID API to retrieves up to 5 optee irq events,
> the optee bottom half event and returns if other async notifications
> are pending, in a single invocation.
> - Implement only mask/unmask irqchip handlers with a 2nd SMC function
> to mask/unmask a optee irq in OP-TEE world from an interrupt context.
> - Added Cc: tags.
> ---
> drivers/tee/optee/optee_private.h | 10 ++
> drivers/tee/optee/optee_smc.h | 88 ++++++++++++++++-
> drivers/tee/optee/smc_abi.c | 158 ++++++++++++++++++++++++++++--
> 3 files changed, 249 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> index 04ae58892608..f467409e02e9 100644
> --- a/drivers/tee/optee/optee_private.h
> +++ b/drivers/tee/optee/optee_private.h
> @@ -94,11 +94,21 @@ struct optee_supp {
> struct completion reqs_c;
> };
>
> +/*
> + * struct optee_smc - optee smc communication struct
> + * @invoke_fn handler function to invoke secure monitor
> + * @memremaped_shm virtual address of memory in shared memory pool
> + * @sec_caps: secure world capabilities defined by
> + * OPTEE_SMC_SEC_CAP_* in optee_smc.h
> + * @notif_irq interrupt used as async notification by OP-TEE or 0
> + * @domain interrupt domain registered by OP-TEE driver
> + */
> struct optee_smc {
> optee_invoke_fn *invoke_fn;
> void *memremaped_shm;
> u32 sec_caps;
> unsigned int notif_irq;
> + struct irq_domain *domain;
> };
>
> /**
> diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
> index 73b5e7760d10..df32ad18eddb 100644
> --- a/drivers/tee/optee/optee_smc.h
> +++ b/drivers/tee/optee/optee_smc.h
> @@ -226,7 +226,8 @@ struct optee_smc_get_shm_config_result {
> * a3 Bit[7:0]: Number of parameters needed for RPC to be supplied
> * as the second MSG arg struct for
> * OPTEE_SMC_CALL_WITH_ARG
> - * Bit[31:8]: Reserved (MBZ)
> + * Bit[23:8]: The maximum interrupt event notification number
> + * Bit[31:24]: Reserved (MBZ)
> * a4-7 Preserved
> *
> * Error return register usage:
> @@ -254,6 +255,11 @@ struct optee_smc_get_shm_config_result {
> #define OPTEE_SMC_SEC_CAP_ASYNC_NOTIF BIT(5)
> /* Secure world supports pre-allocating RPC arg struct */
> #define OPTEE_SMC_SEC_CAP_RPC_ARG BIT(6)
> +/* Secure world supports interrupt events notification to normal world */
> +#define OPTEE_SMC_SEC_CAP_IT_NOTIF BIT(7)
> +
> +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_MASK GENMASK(23, 8)
> +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_SHIFT 8
>
> #define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9
> #define OPTEE_SMC_EXCHANGE_CAPABILITIES \
> @@ -426,6 +432,86 @@ struct optee_smc_disable_shm_cache_result {
> /* See OPTEE_SMC_CALL_WITH_REGD_ARG above */
> #define OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG 19
>
> +/*
> + * Retrieve up to 5 pending interrupt event notified by OP-TEE world
> + * and whether threaded event are pending on OP-TEE async notif
> + * controller, all this since the last call of this function.
> + *
> + * OP-TEE keeps a record of all posted interrupt notification events.
> + * When the async notif interrupt is received by
> + * non-secure world, this function should be called until all pended
> + * interrupt events have been retrieved. When an interrupt event is
> + * retrieved it is cleared from the record in OP-TEE world.
> + *
> + * It is expected that this function is called from an interrupt handler
> + * in normal world.
> + *
> + * Call requests usage:
> + * a0 SMC Function ID, OPTEE_SMC_GET_NOTIF_IT
> + * a1-6 Not used
> + * a7 Hypervisor Client ID register
> + *
> + * Normal return register usage:
> + * a0 OPTEE_SMC_RETURN_OK
> + * a1 Bit[7:0]: Number of pending interrupt carried in a1..a5
> + * Bit[8]: OPTEE_SMC_NOTIF_IT_PENDING if other interrupt(s) are pending
> + * Bit[9]: OPTEE_SMC_NOTIF_ASYNC_PENDING if an threaded event is pending
> + * Bit[10]: OPTEE_SMC_NOTIF_DO_BOTTOM_HALF if retrieved bottom half notif
> + * Bit[15:11]: Reserved for furture use, MBZ
> + * Bit[31:16]: Pending interrupt line value if a1 & 0xFF >= 1
> + * a2 Bit[15:0]: Pending interrupt line value if a1 & 0xFF >= 2
> + * Bit[31:16]: Pending interrupt line value if a1 & 0xFF >= 3
> + * a3 Bit[15:0]: Pending interrupt line value if a1 & 0xFF >= 4
> + * Bit[31:16]: Pending interrupt line value if a1 & 0xFF == 5
> + * a4-7 Preserved
> + *
> + * Not supported return register usage:
> + * a0 OPTEE_SMC_RETURN_ENOTAVAIL
> + * a1-7 Preserved
> + */
> +#define OPTEE_SMC_NOTIF_IT_COUNT_MASK GENMASK(7, 0)
> +#define OPTEE_SMC_NOTIF_IT_PENDING BIT(8)
> +#define OPTEE_SMC_NOTIF_VALUE_PENDING BIT(9)
> +#define OPTEE_SMC_NOTIF_DO_BOTTOM_HALF BIT(10)
> +
> +#define OPTEE_SMC_FUNCID_GET_NOTIF_IT 20
> +#define OPTEE_SMC_GET_NOTIF_IT \
> + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_NOTIF_IT)
> +
> +/*
> + * Configure an interrupt notification event
> + *
> + * It is expected that this function is called from an interrupt handler
> + * in normal world.
> + *
> + * Call requests usage:
> + * a0 SMC Function ID, OPTEE_SMC_CONFIGURE_NOTIF_IT
> + * a1 Interrupt identifier value
> + * a2 Bit[0]: 1 to configure interrupt mask with a3[bit 0], else 0
> + * Bit[31:1] Reserved for future use, MBZ
> + * a3 Bit[0]: 1 to mask the interrupt, 0 to unmask (applies if a2[bit 0]=1)
> + * Bit[31:1] Reserved for future use, MBZ
> + * a4-6 Reserved for furture use, MBZ
> + * a7 Hypervisor Client ID register
> + *
> + * Normal return register usage:
> + * a0 OPTEE_SMC_RETURN_OK
> + * a1-7 Preserved
> + *
> + * Not supported return register usage:
> + * a0 OPTEE_SMC_RETURN_ENOTAVAIL
> + * a1-7 Preserved
> + *
> + * Invalid command with provided arguments return usage:
> + * a0 OPTEE_SMC_RETURN_EBADCMD
> + * a1-7 Preserved
> + */
> +#define OPTEE_SMC_NOTIF_CONFIG_MASK BIT(0)
> +
> +#define OPTEE_SMC_FUNCID_CONFIGURE_NOTIF_IT 21
> +#define OPTEE_SMC_CONFIGURE_NOTIF_IT \
> + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_CONFIGURE_NOTIF_IT)
> +
I assume you're going to update the changes to this file this with the
latest changes in https://github.com/OP-TEE/optee_os/pull/5793
> /*
> * Resume from RPC (for example after processing a foreign interrupt)
> *
> diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> index a1c1fa1a9c28..9f4fdd28f04a 100644
> --- a/drivers/tee/optee/smc_abi.c
> +++ b/drivers/tee/optee/smc_abi.c
> @@ -977,6 +977,71 @@ static int optee_smc_stop_async_notif(struct tee_context *ctx)
> * 5. Asynchronous notification
> */
>
> +static void config_notif_it(optee_invoke_fn *invoke_fn, u32 it_value,
> + u32 op_mask, u32 val_mask)
"it" is a bit short as an abbreviation for interrupt, I'd prefer "itr"
or such. Then there's the question is it an interrupt value, identifier,
line, or number? It would help if we could use a consistant terminology
in this file at least.
> +{
> + struct arm_smccc_res res = { };
> +
> + invoke_fn(OPTEE_SMC_CONFIGURE_NOTIF_IT, it_value, op_mask, val_mask,
> + 0, 0, 0, 0, &res);
> +}
> +
> +static void optee_it_irq_mask(struct irq_data *d)
> +{
> + struct optee *optee = d->domain->host_data;
> +
> + config_notif_it(optee->smc.invoke_fn, d->hwirq, OPTEE_SMC_NOTIF_CONFIG_MASK,
Please try to keep the lines below 80 columns. Same for the other
functions in this patch.
> + OPTEE_SMC_NOTIF_CONFIG_MASK);
> +}
> +
> +static void optee_it_irq_unmask(struct irq_data *d)
> +{
> + struct optee *optee = d->domain->host_data;
> +
> + config_notif_it(optee->smc.invoke_fn, d->hwirq, OPTEE_SMC_NOTIF_CONFIG_MASK, 0);
> +}
> +
> +static struct irq_chip optee_it_irq_chip = {
> + .name = "optee-it",
> + .irq_mask = optee_it_irq_mask,
> + .irq_unmask = optee_it_irq_unmask,
> +};
> +
> +static int optee_it_alloc(struct irq_domain *d, unsigned int virq,
> + unsigned int nr_irqs, void *data)
> +{
> + struct irq_fwspec *fwspec = data;
> + irq_hw_number_t hwirq;
> +
> + hwirq = fwspec->param[0];
> +
> + irq_domain_set_hwirq_and_chip(d, virq, hwirq, &optee_it_irq_chip, d->host_data);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops optee_it_irq_domain_ops = {
> + .alloc = optee_it_alloc,
> + .free = irq_domain_free_irqs_common,
> +};
> +
> +static int optee_irq_domain_init(struct platform_device *pdev,
> + struct optee *optee, u_int max_it)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> +
> + optee->smc.domain = irq_domain_add_linear(np, max_it,
> + &optee_it_irq_domain_ops,
> + optee);
> + if (!optee->smc.domain) {
> + dev_err(dev, "Unable to add irq domain\n");
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
> static u32 get_async_notif_value(optee_invoke_fn *invoke_fn, bool *value_valid,
> bool *value_pending)
> {
> @@ -991,6 +1056,60 @@ static u32 get_async_notif_value(optee_invoke_fn *invoke_fn, bool *value_valid,
> return res.a1;
> }
>
> +static void forward_irq(struct optee *optee, unsigned int id)
> +{
> + if (generic_handle_domain_irq(optee->smc.domain, id)) {
> + pr_err("No consumer for optee irq %u, it will be masked\n", id);
> + config_notif_it(optee->smc.invoke_fn, id,
> + OPTEE_SMC_NOTIF_CONFIG_MASK,
> + OPTEE_SMC_NOTIF_CONFIG_MASK);
> + }
> +}
> +
> +static void retrieve_pending_irqs(struct optee *optee, bool *async_value_pending,
> + bool *do_bottom_half)
> +
> +{
> + struct arm_smccc_res res;
> + bool it_pending;
> + ssize_t cnt;
> + const unsigned int lsb_mask = GENMASK(15, 0);
> + const unsigned int msb_shift = 16;
> +
> + *async_value_pending = false;
> + *do_bottom_half = false;
> +
> + do {
> + optee->smc.invoke_fn(OPTEE_SMC_GET_NOTIF_IT, 0, 0, 0, 0, 0, 0, 0, &res);
> +
> + if (res.a0)
> + return;
> +
> + if (res.a1 & OPTEE_SMC_NOTIF_DO_BOTTOM_HALF)
> + *do_bottom_half = true;
> +
> + it_pending = res.a1 & OPTEE_SMC_NOTIF_IT_PENDING;
> + cnt = res.a1 & OPTEE_SMC_NOTIF_IT_COUNT_MASK;
> + if (cnt > 5 || (!cnt && it_pending)) {
> + WARN_ONCE(0, "Unexpected interrupt notif count %zi\n", cnt);
> + break;
> + }
> +
> + if (--cnt >= 0)
> + forward_irq(optee, res.a1 >> msb_shift);
> + if (--cnt >= 0)
> + forward_irq(optee, res.a2 & lsb_mask);
> + if (--cnt >= 0)
> + forward_irq(optee, res.a2 >> msb_shift);
> + if (--cnt >= 0)
> + forward_irq(optee, res.a3 & lsb_mask);
> + if (--cnt >= 0)
> + forward_irq(optee, res.a3 >> msb_shift);
I believe this should be easier to read:
if (cnt >= 1)
forward_irq(optee, res.a1 >> msb_shift);
if (cnt >= 2)
forward_irq(optee, res.a2 & lsb_mask);
if (cnt >= 3)
forward_irq(optee, res.a2 >> msb_shift);
if (cnt >= 4)
forward_irq(optee, res.a3 & lsb_mask);
if (cnt >= 5)
forward_irq(optee, res.a3 >> msb_shift);
> + } while (it_pending);
> +
> + *async_value_pending = res.a1 & OPTEE_SMC_NOTIF_VALUE_PENDING;
> +}
> +
> static irqreturn_t notif_irq_handler(int irq, void *dev_id)
> {
> struct optee *optee = dev_id;
> @@ -999,9 +1118,14 @@ static irqreturn_t notif_irq_handler(int irq, void *dev_id)
> bool value_pending;
> u32 value;
>
> - do {
> - value = get_async_notif_value(optee->smc.invoke_fn,
> - &value_valid, &value_pending);
> + if (optee->smc.sec_caps & OPTEE_SMC_SEC_CAP_IT_NOTIF)
> + retrieve_pending_irqs(optee, &value_pending, &do_bottom_half);
> + else
> + value_pending = true;
> +
> + while (value_pending) {
> + value = get_async_notif_value(optee->smc.invoke_fn, &value_valid,
> + &value_pending);
> if (!value_valid)
> break;
>
> @@ -1009,10 +1133,11 @@ static irqreturn_t notif_irq_handler(int irq, void *dev_id)
> do_bottom_half = true;
> else
> optee_notif_send(optee, value);
> - } while (value_pending);
> + };
>
> if (do_bottom_half)
> return IRQ_WAKE_THREAD;
> +
> return IRQ_HANDLED;
> }
>
> @@ -1048,6 +1173,9 @@ static void optee_smc_notif_uninit_irq(struct optee *optee)
> free_irq(optee->smc.notif_irq, optee);
> irq_dispose_mapping(optee->smc.notif_irq);
> }
> +
> + if (optee->smc.sec_caps & OPTEE_SMC_SEC_CAP_IT_NOTIF)
> + irq_domain_remove(optee->smc.domain);
> }
> }
>
> @@ -1187,13 +1315,14 @@ static bool optee_msg_api_revision_is_compatible(optee_invoke_fn *invoke_fn)
>
> static bool optee_msg_exchange_capabilities(optee_invoke_fn *invoke_fn,
> u32 *sec_caps, u32 *max_notif_value,
> + u32 *max_notif_it,
> unsigned int *rpc_param_count)
> {
> union {
> struct arm_smccc_res smccc;
> struct optee_smc_exchange_capabilities_result result;
> } res;
> - u32 a1 = 0;
> + u32 a1 = OPTEE_SMC_SEC_CAP_IT_NOTIF;
>
> /*
> * TODO This isn't enough to tell if it's UP system (from kernel
> @@ -1219,6 +1348,12 @@ static bool optee_msg_exchange_capabilities(optee_invoke_fn *invoke_fn,
> else
> *rpc_param_count = 0;
>
> + if (*sec_caps & OPTEE_SMC_SEC_CAP_IT_NOTIF)
> + *max_notif_it = (res.result.data & OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_MASK) >>
> + OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_SHIFT;
> + else
> + *max_notif_it = 0;
> +
> return true;
> }
>
> @@ -1364,6 +1499,7 @@ static int optee_probe(struct platform_device *pdev)
> struct tee_device *teedev;
> struct tee_context *ctx;
> u32 max_notif_value;
> + u32 max_notif_it;
> u32 arg_cache_flags;
> u32 sec_caps;
> int rc;
> @@ -1385,7 +1521,7 @@ static int optee_probe(struct platform_device *pdev)
> }
>
> if (!optee_msg_exchange_capabilities(invoke_fn, &sec_caps,
> - &max_notif_value,
> + &max_notif_value, &max_notif_it,
> &rpc_param_count)) {
> pr_warn("capabilities mismatch\n");
> return -EINVAL;
> @@ -1506,6 +1642,16 @@ static int optee_probe(struct platform_device *pdev)
> irq_dispose_mapping(irq);
> goto err_notif_uninit;
> }
> +
> + if (sec_caps & OPTEE_SMC_SEC_CAP_IT_NOTIF) {
> + rc = optee_irq_domain_init(pdev, optee, max_notif_it);
It looks like there's no cleanup for this in the error path, if the call
to optee_enumerate_devices() below would fail.
Thanks,
Jens
> + if (rc) {
> + free_irq(optee->smc.notif_irq, optee);
> + irq_dispose_mapping(irq);
> + goto err_notif_uninit;
> + }
> + }
> +
> enable_async_notif(optee->smc.invoke_fn);
> pr_info("Asynchronous notifications enabled\n");
> }
> --
> 2.25.1
>
Powered by blists - more mailing lists