[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230204133040.1236799-6-treapking@chromium.org>
Date: Sat, 4 Feb 2023 21:30:36 +0800
From: Pin-yen Lin <treapking@...omium.org>
To: Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <robert.foss@...aro.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Daniel Scally <djrscally@...il.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J . Wysocki" <rafael@...nel.org>,
Prashant Malani <pmalani@...omium.org>,
Benson Leung <bleung@...omium.org>,
Guenter Roeck <groeck@...omium.org>
Cc: linux-kernel@...r.kernel.org,
Nícolas F . R . A . Prado
<nfraprado@...labora.com>, Hsin-Yi Wang <hsinyi@...omium.org>,
devicetree@...r.kernel.org, Pin-yen Lin <treapking@...omium.org>,
Allen Chen <allen.chen@....com.tw>,
Lyude Paul <lyude@...hat.com>, linux-acpi@...r.kernel.org,
dri-devel@...ts.freedesktop.org, Marek Vasut <marex@...x.de>,
Xin Ji <xji@...logixsemi.com>,
Stephen Boyd <swboyd@...omium.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Thomas Zimmermann <tzimmermann@...e.de>,
Javier Martinez Canillas <javierm@...hat.com>,
chrome-platform@...ts.linux.dev, Chen-Yu Tsai <wenst@...omium.org>,
José Expósito <jose.exposito89@...il.com>
Subject: [PATCH v11 5/9] drm/bridge: anx7625: Check for Type-C during panel registration
The output port endpoints can be connected to USB-C connectors.
Running drm_of_find_panel_or_bridge() with such endpoints leads to
a continuous return value of -EPROBE_DEFER, even though there is
no panel present.
To avoid this, check for the existence of a "mode-switch" property in
the port endpoint, and skip panel registration completely if so.
Signed-off-by: Pin-yen Lin <treapking@...omium.org>
Reviewed-by: Chen-Yu Tsai <wenst@...omium.org>
Tested-by: Chen-Yu Tsai <wenst@...omium.org>
---
(no changes since v10)
Changes in v10:
- Collected Reviewed-by and Tested-by tags
Changes in v6:
- New in v6
drivers/gpu/drm/bridge/analogix/anx7625.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index b375887e655d..1cf242130b91 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -1649,7 +1649,7 @@ static int anx7625_get_swing_setting(struct device *dev,
static int anx7625_parse_dt(struct device *dev,
struct anx7625_platform_data *pdata)
{
- struct device_node *np = dev->of_node, *ep0;
+ struct device_node *np = dev->of_node, *ep0, *sw;
int bus_type, mipi_lanes;
anx7625_get_swing_setting(dev, pdata);
@@ -1688,6 +1688,17 @@ static int anx7625_parse_dt(struct device *dev,
if (of_property_read_bool(np, "analogix,audio-enable"))
pdata->audio_en = 1;
+ /*
+ * Don't bother finding a panel if a Type-C `mode-switch` property is
+ * present in one of the endpoints.
+ */
+ for_each_endpoint_of_node(np, sw) {
+ if (of_property_read_bool(sw, "mode-switch")) {
+ of_node_put(sw);
+ return 0;
+ }
+ }
+
pdata->panel_bridge = devm_drm_of_get_bridge(dev, np, 1, 0);
if (IS_ERR(pdata->panel_bridge)) {
if (PTR_ERR(pdata->panel_bridge) == -ENODEV) {
--
2.39.1.519.gcb327c4b5f-goog
Powered by blists - more mailing lists