| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 5 Feb 2023 20:24:29 +0000
From: Qais Yousef <qyousef@...alina.io>
To: Vincent Guittot <vincent.guittot@...aro.org>
Cc: mingo@...nel.org, peterz@...radead.org, dietmar.eggemann@....com,
rafael@...nel.org, viresh.kumar@...aro.org, vschneid@...hat.com,
linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
kajetan.puchalski@....com, lukasz.luba@....com, wvw@...gle.com,
xuewen.yan94@...il.com, han.lin@...iatek.com,
Jonathan.JMChen@...iatek.com
Subject: Re: [PATCH 2/2 v5] sched/fair: Remove capacity inversion detection
On 02/05/23 18:29, Vincent Guittot wrote:
> On Sat, 4 Feb 2023 at 19:42, Qais Yousef <qyousef@...alina.io> wrote:
> >
> > On 02/01/23 15:36, Vincent Guittot wrote:
> > > Remove the capacity inversion detection which is now handled by
> > > util_fits_cpu() returning -1 when we need to continue to look for a
> > > potential CPU with better performance.
> > >
> > > This ends up almost reverting patches below except for some comments:
> >
> > nit: I think this comment must be removed/reworeded though
>
> This comment has already been removed. That's why I said almost revert
> except for some comments in the commit message
Oh, my diff cmd had the wrong order then, sorry.
>
> >
> > diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> > index 691a2f9c4efa..c6c8e7f52935 100644
> > --- a/kernel/sched/fair.c
> > +++ b/kernel/sched/fair.c
> > @@ -4476,10 +4476,6 @@ static inline int util_fits_cpu(unsigned long util,
> > *
> > * For uclamp_max, we can tolerate a drop in performance level as the
> > * goal is to cap the task. So it's okay if it's getting less.
> > - *
> > - * In case of capacity inversion, which is not handled yet, we should
> > - * honour the inverted capacity for both uclamp_min and uclamp_max all
> > - * the time.
> > */
> > capacity_orig = capacity_orig_of(cpu);
> > capacity_orig_thermal = capacity_orig - arch_scale_thermal_pressure(cpu);
> >
> > > commit da07d2f9c153 ("sched/fair: Fixes for capacity inversion detection")
> > > commit aa69c36f31aa ("sched/fair: Consider capacity inversion in util_fits_cpu()")
> > > commit 44c7b80bffc3 ("sched/fair: Detect capacity inversion")
> > >
> > > Signed-off-by: Vincent Guittot <vincent.guittot@...aro.org>
> >
> > Apart from that, LGTM.
> >
> > Reviewed-by: Qais Yousef <qyousef@...alina.io>
>
> Thanks
>
> >
> >
> > Thanks!
> >
> > --
> > Qais Yousef
> >
> > > ---
> > > kernel/sched/fair.c | 84 +++-----------------------------------------
> > > kernel/sched/sched.h | 19 ----------
> > > 2 files changed, 5 insertions(+), 98 deletions(-)
> > >
> > > diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> > > index 074742f107c0..c6c8e7f52935 100644
> > > --- a/kernel/sched/fair.c
> > > +++ b/kernel/sched/fair.c
> > > @@ -4476,17 +4476,9 @@ static inline int util_fits_cpu(unsigned long util,
> > > *
> > > * For uclamp_max, we can tolerate a drop in performance level as the
> > > * goal is to cap the task. So it's okay if it's getting less.
> > > - *
> > > - * In case of capacity inversion we should honour the inverted capacity
> > > - * for both uclamp_min and uclamp_max all the time.
> > > */
> > > - capacity_orig = cpu_in_capacity_inversion(cpu);
> > > - if (capacity_orig) {
> > > - capacity_orig_thermal = capacity_orig;
> > > - } else {
> > > - capacity_orig = capacity_orig_of(cpu);
> > > - capacity_orig_thermal = capacity_orig - arch_scale_thermal_pressure(cpu);
> > > - }
> > > + capacity_orig = capacity_orig_of(cpu);
> > > + capacity_orig_thermal = capacity_orig - arch_scale_thermal_pressure(cpu);
> > >
> > > /*
> > > * We want to force a task to fit a cpu as implied by uclamp_max.
> > > @@ -9027,82 +9019,16 @@ static unsigned long scale_rt_capacity(int cpu)
> > >
> > > static void update_cpu_capacity(struct sched_domain *sd, int cpu)
> > > {
> > > - unsigned long capacity_orig = arch_scale_cpu_capacity(cpu);
> > > unsigned long capacity = scale_rt_capacity(cpu);
> > > struct sched_group *sdg = sd->groups;
> > > - struct rq *rq = cpu_rq(cpu);
> > >
> > > - rq->cpu_capacity_orig = capacity_orig;
> > > + cpu_rq(cpu)->cpu_capacity_orig = arch_scale_cpu_capacity(cpu);
> > >
> > > if (!capacity)
> > > capacity = 1;
> > >
> > > - rq->cpu_capacity = capacity;
> > > -
> > > - /*
> > > - * Detect if the performance domain is in capacity inversion state.
> > > - *
> > > - * Capacity inversion happens when another perf domain with equal or
> > > - * lower capacity_orig_of() ends up having higher capacity than this
> > > - * domain after subtracting thermal pressure.
> > > - *
> > > - * We only take into account thermal pressure in this detection as it's
> > > - * the only metric that actually results in *real* reduction of
> > > - * capacity due to performance points (OPPs) being dropped/become
> > > - * unreachable due to thermal throttling.
> > > - *
> > > - * We assume:
> > > - * * That all cpus in a perf domain have the same capacity_orig
> > > - * (same uArch).
> > > - * * Thermal pressure will impact all cpus in this perf domain
> > > - * equally.
> > > - */
> > > - if (sched_energy_enabled()) {
> > > - unsigned long inv_cap = capacity_orig - thermal_load_avg(rq);
> > > - struct perf_domain *pd;
> > > -
> > > - rcu_read_lock();
> > > -
> > > - pd = rcu_dereference(rq->rd->pd);
> > > - rq->cpu_capacity_inverted = 0;
> > > -
> > > - for (; pd; pd = pd->next) {
> > > - struct cpumask *pd_span = perf_domain_span(pd);
> > > - unsigned long pd_cap_orig, pd_cap;
> > > -
> > > - /* We can't be inverted against our own pd */
> > > - if (cpumask_test_cpu(cpu_of(rq), pd_span))
> > > - continue;
> > > -
> > > - cpu = cpumask_any(pd_span);
> > > - pd_cap_orig = arch_scale_cpu_capacity(cpu);
> > > -
> > > - if (capacity_orig < pd_cap_orig)
> > > - continue;
> > > -
> > > - /*
> > > - * handle the case of multiple perf domains have the
> > > - * same capacity_orig but one of them is under higher
> > > - * thermal pressure. We record it as capacity
> > > - * inversion.
> > > - */
> > > - if (capacity_orig == pd_cap_orig) {
> > > - pd_cap = pd_cap_orig - thermal_load_avg(cpu_rq(cpu));
> > > -
> > > - if (pd_cap > inv_cap) {
> > > - rq->cpu_capacity_inverted = inv_cap;
> > > - break;
> > > - }
> > > - } else if (pd_cap_orig > inv_cap) {
> > > - rq->cpu_capacity_inverted = inv_cap;
> > > - break;
> > > - }
> > > - }
> > > -
> > > - rcu_read_unlock();
> > > - }
> > > -
> > > - trace_sched_cpu_capacity_tp(rq);
> > > + cpu_rq(cpu)->cpu_capacity = capacity;
> > > + trace_sched_cpu_capacity_tp(cpu_rq(cpu));
> > >
> > > sdg->sgc->capacity = capacity;
> > > sdg->sgc->min_capacity = capacity;
> > > diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
> > > index 1072502976df..3e8df6d31c1e 100644
> > > --- a/kernel/sched/sched.h
> > > +++ b/kernel/sched/sched.h
> > > @@ -1044,7 +1044,6 @@ struct rq {
> > >
> > > unsigned long cpu_capacity;
> > > unsigned long cpu_capacity_orig;
> > > - unsigned long cpu_capacity_inverted;
> > >
> > > struct balance_callback *balance_callback;
> > >
> > > @@ -2899,24 +2898,6 @@ static inline unsigned long capacity_orig_of(int cpu)
> > > return cpu_rq(cpu)->cpu_capacity_orig;
> > > }
> > >
> > > -/*
> > > - * Returns inverted capacity if the CPU is in capacity inversion state.
> > > - * 0 otherwise.
> > > - *
> > > - * Capacity inversion detection only considers thermal impact where actual
> > > - * performance points (OPPs) gets dropped.
> > > - *
> > > - * Capacity inversion state happens when another performance domain that has
> > > - * equal or lower capacity_orig_of() becomes effectively larger than the perf
> > > - * domain this CPU belongs to due to thermal pressure throttling it hard.
> > > - *
> > > - * See comment in update_cpu_capacity().
> > > - */
> > > -static inline unsigned long cpu_in_capacity_inversion(int cpu)
> > > -{
> > > - return cpu_rq(cpu)->cpu_capacity_inverted;
> > > -}
> > > -
> > > /**
> > > * enum cpu_util_type - CPU utilization type
> > > * @FREQUENCY_UTIL: Utilization used to select frequency
> > > --
> > > 2.34.1
> > >
Powered by blists - more mailing lists