[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e7257f9a-86c5-74e8-c538-6f6d2ba13274@collabora.com>
Date: Tue, 7 Feb 2023 15:46:06 +0000
From: Lucas Tanure <lucas.tanure@...labora.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
David Rhodes <david.rhodes@...rus.com>,
Charles Keepax <ckeepax@...nsource.cirrus.com>,
Liam Girdwood <lgirdwood@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>
Cc: alsa-devel@...a-project.org, devicetree@...r.kernel.org,
patches@...nsource.cirrus.com, linux-kernel@...r.kernel.org,
kernel@...labora.com
Subject: Re: [PATCH 2/2] Documentation: cs35l41: Shared boost properties
On 07-02-2023 10:42, Krzysztof Kozlowski wrote:
> On 07/02/2023 11:40, Lucas Tanure wrote:
>> Describe the properties used for shared boost
>> configuration.
>
> Use subject prefixes matching the subsystem (which you can get for
> example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
> your patch is touching).
ack
>
>>
>> Signed-off-by: Lucas Tanure <lucas.tanure@...labora.com>
>> ---
>> .../devicetree/bindings/sound/cirrus,cs35l41.yaml | 11 ++++++++++-
>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
>> index 18fb471aa891..6f5f01bec6f1 100644
>> --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
>> +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
>> @@ -85,11 +85,20 @@ properties:
>> boost-cap-microfarad.
>> External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to
>> enable boost voltage.
>> + Shared boost allows two amplifiers to share a single boost circuit by
>> + communicating on the MDSYNC bus. The passive amplifier does not control
>> + the boost and receives data from the active amplifier. GPIO1 should be
>> + configured for Sync when shared boost is used. Shared boost is not
>> + compatible with External boost. Active amplifier requires
>> + boost-peak-milliamp, boost-ind-nanohenry and boost-cap-microfarad.
>> 0 = Internal Boost
>> 1 = External Boost
>> + 2 = Reserved
>
> How binding can be reserved? For what and why? Drop. 2 is shared active,
> 3 is shared passive.
2 Is shared boost without VSPK switch, a mode not supported for new
system designs. But there is laptops using it, so we need to keep
supporting in the driver.
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists