| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230207023514.29783-6-hayashi.kunihiko@socionext.com>
Date: Tue, 7 Feb 2023 11:35:11 +0900
From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To: soc@...nel.org, Arnd Bergmann <arnd@...db.de>,
Olof Johansson <olof@...om.net>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Masami Hiramatsu <mhiramat@...nel.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH 5/8] arm64: dts: uniphier: Align node names for SoC-dependent controller and PHYs with bindings
The node names for SoC-dependent controllers and PHYs should be
generic ones according to the DT schemas.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
---
.../boot/dts/socionext/uniphier-ld11.dtsi | 32 +++++++--------
.../boot/dts/socionext/uniphier-ld20.dtsi | 40 +++++++++----------
.../boot/dts/socionext/uniphier-pxs3.dtsi | 40 +++++++++----------
3 files changed, 56 insertions(+), 56 deletions(-)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 1c76b4375b2e..148d9092572a 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -313,12 +313,12 @@ evea_hp: endpoint {
};
};
- adamv@...20000 {
+ syscon@...20000 {
compatible = "socionext,uniphier-ld11-adamv",
"simple-mfd", "syscon";
reg = <0x57920000 0x1000>;
- adamv_rst: reset {
+ adamv_rst: reset-controller {
compatible = "socionext,uniphier-ld11-adamv-reset";
#reset-cells = <1>;
};
@@ -417,28 +417,28 @@ smpctrl@...01000 {
reg = <0x59801000 0x400>;
};
- sdctrl@...10000 {
+ syscon@...10000 {
compatible = "socionext,uniphier-ld11-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x400>;
- sd_rst: reset {
+ sd_rst: reset-controller {
compatible = "socionext,uniphier-ld11-sd-reset";
#reset-cells = <1>;
};
};
- perictrl@...20000 {
+ syscon@...20000 {
compatible = "socionext,uniphier-ld11-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-ld11-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-ld11-peri-reset";
#reset-cells = <1>;
};
@@ -511,24 +511,24 @@ usb2: usb@...20100 {
has-transaction-translator;
};
- mioctrl@...e0000 {
+ syscon@...e0000 {
compatible = "socionext,uniphier-ld11-mioctrl",
"simple-mfd", "syscon";
reg = <0x5b3e0000 0x800>;
- mio_clk: clock {
+ mio_clk: clock-controller {
compatible = "socionext,uniphier-ld11-mio-clock";
#clock-cells = <1>;
};
- mio_rst: reset {
+ mio_rst: reset-controller {
compatible = "socionext,uniphier-ld11-mio-reset";
#reset-cells = <1>;
resets = <&sys_rst 7>;
};
};
- soc_glue: soc-glue@...00000 {
+ soc_glue: syscon@...00000 {
compatible = "socionext,uniphier-ld11-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -537,7 +537,7 @@ pinctrl: pinctrl {
compatible = "socionext,uniphier-ld11-pinctrl";
};
- usb-controller {
+ usb-hub {
compatible = "socionext,uniphier-ld11-usb2-phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -559,7 +559,7 @@ usb_phy2: phy@2 {
};
};
- soc-glue@...00000 {
+ syscon@...00000 {
compatible = "socionext,uniphier-ld11-soc-glue-debug",
"simple-mfd";
#address-cells = <1>;
@@ -601,17 +601,17 @@ gic: interrupt-controller@...00000 {
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
- sysctrl@...40000 {
+ syscon@...40000 {
compatible = "socionext,uniphier-ld11-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-ld11-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-ld11-reset";
#reset-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 9308458f9611..c83265c9b520 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -444,12 +444,12 @@ evea_hp: endpoint {
};
};
- adamv@...20000 {
+ syscon@...20000 {
compatible = "socionext,uniphier-ld20-adamv",
"simple-mfd", "syscon";
reg = <0x57920000 0x1000>;
- adamv_rst: reset {
+ adamv_rst: reset-controller {
compatible = "socionext,uniphier-ld20-adamv-reset";
#reset-cells = <1>;
};
@@ -548,33 +548,33 @@ smpctrl@...01000 {
reg = <0x59801000 0x400>;
};
- sdctrl@...10000 {
+ syscon@...10000 {
compatible = "socionext,uniphier-ld20-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x400>;
- sd_clk: clock {
+ sd_clk: clock-controller {
compatible = "socionext,uniphier-ld20-sd-clock";
#clock-cells = <1>;
};
- sd_rst: reset {
+ sd_rst: reset-controller {
compatible = "socionext,uniphier-ld20-sd-reset";
#reset-cells = <1>;
};
};
- perictrl@...20000 {
+ syscon@...20000 {
compatible = "socionext,uniphier-ld20-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-ld20-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-ld20-peri-reset";
#reset-cells = <1>;
};
@@ -613,7 +613,7 @@ sd: mmc@...00000 {
cap-sd-highspeed;
};
- soc_glue: soc-glue@...00000 {
+ soc_glue: syscon@...00000 {
compatible = "socionext,uniphier-ld20-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -623,7 +623,7 @@ pinctrl: pinctrl {
};
};
- soc-glue@...00000 {
+ syscon@...00000 {
compatible = "socionext,uniphier-ld20-soc-glue-debug",
"simple-mfd";
#address-cells = <1>;
@@ -709,17 +709,17 @@ gic: interrupt-controller@...00000 {
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
- sysctrl@...40000 {
+ syscon@...40000 {
compatible = "socionext,uniphier-ld20-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-ld20-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-ld20-reset";
#reset-cells = <1>;
};
@@ -782,7 +782,7 @@ usb-controller@...00000 {
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
- usb_rst: reset@0 {
+ usb_rst: reset-controller@0 {
compatible = "socionext,uniphier-ld20-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -828,7 +828,7 @@ usb_vbus3: regulator@130 {
resets = <&sys_rst 14>;
};
- usb_hsphy0: hs-phy@200 {
+ usb_hsphy0: phy@200 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
@@ -842,7 +842,7 @@ usb_hsphy0: hs-phy@200 {
<&usb_hs_i0>;
};
- usb_hsphy1: hs-phy@210 {
+ usb_hsphy1: phy@210 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
@@ -856,7 +856,7 @@ usb_hsphy1: hs-phy@210 {
<&usb_hs_i0>;
};
- usb_hsphy2: hs-phy@220 {
+ usb_hsphy2: phy@220 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x220 0x10>;
#phy-cells = <0>;
@@ -870,7 +870,7 @@ usb_hsphy2: hs-phy@220 {
<&usb_hs_i2>;
};
- usb_hsphy3: hs-phy@230 {
+ usb_hsphy3: phy@230 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x230 0x10>;
#phy-cells = <0>;
@@ -884,7 +884,7 @@ usb_hsphy3: hs-phy@230 {
<&usb_hs_i2>;
};
- usb_ssphy0: ss-phy@300 {
+ usb_ssphy0: phy@300 {
compatible = "socionext,uniphier-ld20-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
@@ -895,7 +895,7 @@ usb_ssphy0: ss-phy@300 {
vbus-supply = <&usb_vbus0>;
};
- usb_ssphy1: ss-phy@310 {
+ usb_ssphy1: phy@310 {
compatible = "socionext,uniphier-ld20-usb3-ssphy";
reg = <0x310 0x10>;
#phy-cells = <0>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index b0c29510a7da..dd60cc04d6fb 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -370,33 +370,33 @@ smpctrl@...01000 {
reg = <0x59801000 0x400>;
};
- sdctrl@...10000 {
+ syscon@...10000 {
compatible = "socionext,uniphier-pxs3-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x400>;
- sd_clk: clock {
+ sd_clk: clock-controller {
compatible = "socionext,uniphier-pxs3-sd-clock";
#clock-cells = <1>;
};
- sd_rst: reset {
+ sd_rst: reset-controller {
compatible = "socionext,uniphier-pxs3-sd-reset";
#reset-cells = <1>;
};
};
- perictrl@...20000 {
+ syscon@...20000 {
compatible = "socionext,uniphier-pxs3-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-pxs3-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-pxs3-peri-reset";
#reset-cells = <1>;
};
@@ -439,7 +439,7 @@ sd: mmc@...00000 {
sd-uhs-sdr50;
};
- soc_glue: soc-glue@...00000 {
+ soc_glue: syscon@...00000 {
compatible = "socionext,uniphier-pxs3-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -449,7 +449,7 @@ pinctrl: pinctrl {
};
};
- soc-glue@...00000 {
+ syscon@...00000 {
compatible = "socionext,uniphier-pxs3-soc-glue-debug",
"simple-mfd";
#address-cells = <1>;
@@ -535,17 +535,17 @@ gic: interrupt-controller@...00000 {
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
- sysctrl@...40000 {
+ syscon@...40000 {
compatible = "socionext,uniphier-pxs3-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-pxs3-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-pxs3-reset";
#reset-cells = <1>;
};
@@ -707,7 +707,7 @@ usb-controller@...00000 {
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
- usb0_rst: reset@0 {
+ usb0_rst: reset-controller@0 {
compatible = "socionext,uniphier-pxs3-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -735,7 +735,7 @@ usb0_vbus1: regulator@110 {
resets = <&sys_rst 12>;
};
- usb0_hsphy0: hs-phy@200 {
+ usb0_hsphy0: phy@200 {
compatible = "socionext,uniphier-pxs3-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
@@ -749,7 +749,7 @@ usb0_hsphy0: hs-phy@200 {
<&usb_hs_i0>;
};
- usb0_hsphy1: hs-phy@210 {
+ usb0_hsphy1: phy@210 {
compatible = "socionext,uniphier-pxs3-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
@@ -763,7 +763,7 @@ usb0_hsphy1: hs-phy@210 {
<&usb_hs_i0>;
};
- usb0_ssphy0: ss-phy@300 {
+ usb0_ssphy0: phy@300 {
compatible = "socionext,uniphier-pxs3-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
@@ -774,7 +774,7 @@ usb0_ssphy0: ss-phy@300 {
vbus-supply = <&usb0_vbus0>;
};
- usb0_ssphy1: ss-phy@310 {
+ usb0_ssphy1: phy@310 {
compatible = "socionext,uniphier-pxs3-usb3-ssphy";
reg = <0x310 0x10>;
#phy-cells = <0>;
@@ -809,7 +809,7 @@ usb-controller@...00000 {
#size-cells = <1>;
ranges = <0 0x65d00000 0x400>;
- usb1_rst: reset@0 {
+ usb1_rst: reset-controller@0 {
compatible = "socionext,uniphier-pxs3-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -837,7 +837,7 @@ usb1_vbus1: regulator@110 {
resets = <&sys_rst 13>;
};
- usb1_hsphy0: hs-phy@200 {
+ usb1_hsphy0: phy@200 {
compatible = "socionext,uniphier-pxs3-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
@@ -852,7 +852,7 @@ usb1_hsphy0: hs-phy@200 {
<&usb_hs_i2>;
};
- usb1_hsphy1: hs-phy@210 {
+ usb1_hsphy1: phy@210 {
compatible = "socionext,uniphier-pxs3-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
@@ -867,7 +867,7 @@ usb1_hsphy1: hs-phy@210 {
<&usb_hs_i2>;
};
- usb1_ssphy0: ss-phy@300 {
+ usb1_ssphy0: phy@300 {
compatible = "socionext,uniphier-pxs3-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
--
2.25.1
Powered by blists - more mailing lists