linux-kernel - [PATCH 1/8] arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230207-b4-amlogic-bindings-fixups-v2-v1-1-93b7e50286e7@linaro.org>
Date:   Tue, 07 Feb 2023 16:07:54 +0100
From:   Neil Armstrong <neil.armstrong@...aro.org>
To:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Kevin Hilman <khilman@...libre.com>,
        Jerome Brunet <jbrunet@...libre.com>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        Christian Hewitt <christianshewitt@...il.com>,
        Yuntian Zhang <yt@...xa.com>
Cc:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Neil Armstrong <neil.armstrong@...aro.org>
Subject: [PATCH 1/8] arm64: dts: amlogic: meson-sm1-bananapi: correct
 usb-hub hog node name

Fixes the following bindings check error:
usb-hub: $nodename:0: 'usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'

Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index bb492581f1b7..e1683e0630b0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -316,7 +316,7 @@ &gpio {
 	 * be handled by a USB specific power sequence to reset the Hub
 	 * when the USB bus is powered down.
 	 */
-	usb-hub {
+	usb-hub-hog {
 		gpio-hog;
 		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
 		output-high;

-- 
2.34.1