| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 8 Feb 2023 09:38:04 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Clément Léger <clement.leger@...tlin.com>,
Andrew Lunn <andrew@...n.ch>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Herve Codina <herve.codina@...tlin.com>,
Miquèl Raynal <miquel.raynal@...tlin.com>,
Milan Stevanovic <milan.stevanovic@...com>,
Jimmy Lalande <jimmy.lalande@...com>,
Pascal Eberhard <pascal.eberhard@...com>,
Arun Ramadoss <Arun.Ramadoss@...rochip.com>,
linux-renesas-soc@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v3 3/3] net: dsa: rzn1-a5psw: add vlan support
On 2/8/23 08:17, Clément Léger wrote:
> Add support for vlan operation (add, del, filtering) on the RZN1
> driver. The a5psw switch supports up to 32 VLAN IDs with filtering,
> tagged/untagged VLANs and PVID for each ports.
>
> Signed-off-by: Clément Léger <clement.leger@...tlin.com>
This looks good to me, just a few nits/suggestions below.
> ---
> drivers/net/dsa/rzn1_a5psw.c | 167 +++++++++++++++++++++++++++++++++++
> drivers/net/dsa/rzn1_a5psw.h | 8 +-
> 2 files changed, 172 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
> index 0ce3948952db..de6b18ec647d 100644
> --- a/drivers/net/dsa/rzn1_a5psw.c
> +++ b/drivers/net/dsa/rzn1_a5psw.c
> @@ -583,6 +583,147 @@ static int a5psw_port_fdb_dump(struct dsa_switch *ds, int port,
> return ret;
> }
>
> +static int a5psw_port_vlan_filtering(struct dsa_switch *ds, int port,
> + bool vlan_filtering,
> + struct netlink_ext_ack *extack)
> +{
> + u32 mask = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
> + BIT(port + A5PSW_VLAN_DISC_SHIFT);
> + struct a5psw *a5psw = ds->priv;
> + u32 val = 0;
> +
> + if (vlan_filtering)
> + val = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
> + BIT(port + A5PSW_VLAN_DISC_SHIFT);
> +
> + a5psw_reg_rmw(a5psw, A5PSW_VLAN_VERIFY, mask, val);
> +
> + return 0;
> +}
> +
> +static int a5psw_find_vlan_entry(struct a5psw *a5psw, u16 vid)
> +{
> + u32 vlan_res;
> + int i;
> +
> + /* Find vlan for this port */
> + for (i = 0; i < A5PSW_VLAN_COUNT; i++) {
> + vlan_res = a5psw_reg_readl(a5psw, A5PSW_VLAN_RES(i));
> + if (FIELD_GET(A5PSW_VLAN_RES_VLANID, vlan_res) == vid)
> + return i;
> + }
> +
> + return -1;
> +}
> +
> +static int a5psw_get_vlan_res_entry(struct a5psw *a5psw, u16 newvid)
The name seems a bit misleading with respect to what it does, maybe
a5psw_new_vlan_res_entry()?
> +{
> + u32 vlan_res;
> + int i;
> +
> + /* Find a free VLAN entry */
> + for (i = 0; i < A5PSW_VLAN_COUNT; i++) {
> + vlan_res = a5psw_reg_readl(a5psw, A5PSW_VLAN_RES(i));
> + if (!(FIELD_GET(A5PSW_VLAN_RES_PORTMASK, vlan_res))) {
> + vlan_res = FIELD_PREP(A5PSW_VLAN_RES_VLANID, newvid);
> + a5psw_reg_writel(a5psw, A5PSW_VLAN_RES(i), vlan_res);
> + return i;
> + }
> + }
> +
> + return -1;
> +}
> +
> +static void a5psw_port_vlan_tagged_cfg(struct a5psw *a5psw, int vlan_res_id,
unsigned int vlan_res_id
> + int port, bool set)
> +{
> + u32 mask = A5PSW_VLAN_RES_WR_PORTMASK | A5PSW_VLAN_RES_RD_TAGMASK |
> + BIT(port);
> + u32 vlan_res_off = A5PSW_VLAN_RES(vlan_res_id);
> + u32 val = A5PSW_VLAN_RES_WR_TAGMASK, reg;
> +
> + if (set)
> + val |= BIT(port);
> +
> + /* Toggle tag mask read */
> + a5psw_reg_writel(a5psw, vlan_res_off, A5PSW_VLAN_RES_RD_TAGMASK);
> + reg = a5psw_reg_readl(a5psw, vlan_res_off);
> + a5psw_reg_writel(a5psw, vlan_res_off, A5PSW_VLAN_RES_RD_TAGMASK);
> +
> + reg &= ~mask;
> + reg |= val;
> + a5psw_reg_writel(a5psw, vlan_res_off, reg);
> +}
> +
> +static void a5psw_port_vlan_cfg(struct a5psw *a5psw, int vlan_res_id, int port,
Likewise
> + bool set)
> +{
> + u32 mask = A5PSW_VLAN_RES_WR_TAGMASK | BIT(port);
> + u32 reg = A5PSW_VLAN_RES_WR_PORTMASK;
> +
> + if (set)
> + reg |= BIT(port);
> +
> + a5psw_reg_rmw(a5psw, A5PSW_VLAN_RES(vlan_res_id), mask, reg);
> +}
> +
> +static int a5psw_port_vlan_add(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan,
> + struct netlink_ext_ack *extack)
> +{
> + bool tagged = !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
> + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
> + struct a5psw *a5psw = ds->priv;
> + u16 vid = vlan->vid;
> + int vlan_res_id;
> +
> + dev_dbg(a5psw->dev, "Add VLAN %d on port %d, %s, %s\n",
> + vid, port, tagged ? "tagged" : "untagged",
> + pvid ? "PVID" : "no PVID");
> +
> + vlan_res_id = a5psw_find_vlan_entry(a5psw, vid);
> + if (vlan_res_id < 0) {
> + vlan_res_id = a5psw_get_vlan_res_entry(a5psw, vid);
> + if (vlan_res_id < 0)
> + return -EINVAL;
return -ENOSPC?
> + }
> +
> + a5psw_port_vlan_cfg(a5psw, vlan_res_id, port, true);
> + if (tagged)
> + a5psw_port_vlan_tagged_cfg(a5psw, vlan_res_id, port, true);
> +
> + if (pvid) {
> + a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE_ENA, BIT(port),
> + BIT(port));
> + a5psw_reg_writel(a5psw, A5PSW_SYSTEM_TAGINFO(port), vid);
> + }
> +
> + return 0;
> +}
> +
> +static int a5psw_port_vlan_del(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan)
> +{
> + struct a5psw *a5psw = ds->priv;
> + u16 vid = vlan->vid;
> + int vlan_res_id;
> +
> + dev_dbg(a5psw->dev, "Removing VLAN %d on port %d\n", vid, port);
> +
> + vlan_res_id = a5psw_find_vlan_entry(a5psw, vid);
> + if (vlan_res_id < 0)
> + return -EINVAL;
-EINVAL looks legit here
> +
> + a5psw_port_vlan_cfg(a5psw, vlan_res_id, port, false);
> + a5psw_port_vlan_tagged_cfg(a5psw, vlan_res_id, port, false);
> +
> + /* Disable PVID if the vid is matching the port one */
> + if (vid == a5psw_reg_readl(a5psw, A5PSW_SYSTEM_TAGINFO(port)))
> + a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE_ENA, BIT(port), 0);
> +
> + return 0;
> +}
> +
> static u64 a5psw_read_stat(struct a5psw *a5psw, u32 offset, int port)
> {
> u32 reg_lo, reg_hi;
> @@ -700,6 +841,27 @@ static void a5psw_get_eth_ctrl_stats(struct dsa_switch *ds, int port,
> ctrl_stats->MACControlFramesReceived = stat;
> }
>
> +static void a5psw_vlan_setup(struct a5psw *a5psw, int port)
> +{
> + u32 reg;
> +
> + /* Enable TAG always mode for the port, this is actually controlled
> + * by VLAN_IN_MODE_ENA field which will be used for PVID insertion
> + */
> + reg = A5PSW_VLAN_IN_MODE_TAG_ALWAYS;
> + reg <<= A5PSW_VLAN_IN_MODE_PORT_SHIFT(port);
> + a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE, A5PSW_VLAN_IN_MODE_PORT(port),
> + reg);
If we always enable VLAN mode, which VLAN ID do switch ports not part of
a VLAN aware bridge get classified into?
> +
> + /* Set transparent mode for output frame manipulation, this will depend
> + * on the VLAN_RES configuration mode
> + */
> + reg = A5PSW_VLAN_OUT_MODE_TRANSPARENT;
> + reg <<= A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port);
> + a5psw_reg_rmw(a5psw, A5PSW_VLAN_OUT_MODE,
> + A5PSW_VLAN_OUT_MODE_PORT(port), reg);
Sort of a follow-on to the previous question, what does transparent
mean? Does that mean the frames ingressing with a certain VLAN tag will
egress with the same VLAN tag in the absence of a VLAN configuration
rewriting the tag?
> +}
> +
> static int a5psw_setup(struct dsa_switch *ds)
> {
> struct a5psw *a5psw = ds->priv;
> @@ -772,6 +934,8 @@ static int a5psw_setup(struct dsa_switch *ds)
> /* Enable management forward only for user ports */
> if (dsa_port_is_user(dp))
> a5psw_port_mgmtfwd_set(a5psw, port, true);
> +
> + a5psw_vlan_setup(a5psw, port);
> }
>
> return 0;
> @@ -801,6 +965,9 @@ static const struct dsa_switch_ops a5psw_switch_ops = {
> .port_bridge_flags = a5psw_port_bridge_flags,
> .port_stp_state_set = a5psw_port_stp_state_set,
> .port_fast_age = a5psw_port_fast_age,
> + .port_vlan_filtering = a5psw_port_vlan_filtering,
> + .port_vlan_add = a5psw_port_vlan_add,
> + .port_vlan_del = a5psw_port_vlan_del,
> .port_fdb_add = a5psw_port_fdb_add,
> .port_fdb_del = a5psw_port_fdb_del,
> .port_fdb_dump = a5psw_port_fdb_dump,
> diff --git a/drivers/net/dsa/rzn1_a5psw.h b/drivers/net/dsa/rzn1_a5psw.h
> index c67abd49c013..2bad2e3edc2a 100644
> --- a/drivers/net/dsa/rzn1_a5psw.h
> +++ b/drivers/net/dsa/rzn1_a5psw.h
> @@ -50,7 +50,9 @@
> #define A5PSW_VLAN_IN_MODE_TAG_ALWAYS 0x2
>
> #define A5PSW_VLAN_OUT_MODE 0x2C
> -#define A5PSW_VLAN_OUT_MODE_PORT(port) (GENMASK(1, 0) << ((port) * 2))
> +#define A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port) ((port) * 2)
> +#define A5PSW_VLAN_OUT_MODE_PORT(port) (GENMASK(1, 0) << \
> + A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port))
> #define A5PSW_VLAN_OUT_MODE_DIS 0x0
> #define A5PSW_VLAN_OUT_MODE_STRIP 0x1
> #define A5PSW_VLAN_OUT_MODE_TAG_THROUGH 0x2
> @@ -59,7 +61,7 @@
> #define A5PSW_VLAN_IN_MODE_ENA 0x30
> #define A5PSW_VLAN_TAG_ID 0x34
>
> -#define A5PSW_SYSTEM_TAGINFO(port) (0x200 + A5PSW_PORT_OFFSET(port))
> +#define A5PSW_SYSTEM_TAGINFO(port) (0x200 + 4 * (port))
>
> #define A5PSW_AUTH_PORT(port) (0x240 + 4 * (port))
> #define A5PSW_AUTH_PORT_AUTHORIZED BIT(0)
> @@ -68,7 +70,7 @@
> #define A5PSW_VLAN_RES_WR_PORTMASK BIT(30)
> #define A5PSW_VLAN_RES_WR_TAGMASK BIT(29)
> #define A5PSW_VLAN_RES_RD_TAGMASK BIT(28)
> -#define A5PSW_VLAN_RES_ID GENMASK(16, 5)
> +#define A5PSW_VLAN_RES_VLANID GENMASK(16, 5)
> #define A5PSW_VLAN_RES_PORTMASK GENMASK(4, 0)
>
> #define A5PSW_RXMATCH_CONFIG(port) (0x3e80 + 4 * (port))
--
Florian
Powered by blists - more mailing lists