| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230209074510.4153294-2-abel.vesa@linaro.org>
Date: Thu, 9 Feb 2023 09:45:10 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-gpio@...r.kernel.org
Subject: [PATCH v4 2/2] arm64: dts: qcom: sm8550: Add bias pull up value to tlmm i2c data clk states
The default bias pull up value for the tlmm i2c data clk states is
2.2kOhms. Add this value to make sure the driver factors in the i2c pull
up bit when writing the config register.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
The v3 of this specific patch is here:
https://lore.kernel.org/all/20230208081836.984673-2-abel.vesa@linaro.org/
Changes since v3:
* none
arch/arm64/boot/dts/qcom/sm8550.dtsi | 30 ++++++++++++++--------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 1dea055a6815..6e60afc748cf 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2695,7 +2695,7 @@ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
pins = "gpio28", "gpio29";
function = "qup1_se0";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c1_data_clk: qup-i2c1-data-clk-state {
@@ -2703,7 +2703,7 @@ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
pins = "gpio32", "gpio33";
function = "qup1_se1";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c2_data_clk: qup-i2c2-data-clk-state {
@@ -2711,7 +2711,7 @@ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
pins = "gpio36", "gpio37";
function = "qup1_se2";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c3_data_clk: qup-i2c3-data-clk-state {
@@ -2719,7 +2719,7 @@ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
pins = "gpio40", "gpio41";
function = "qup1_se3";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c4_data_clk: qup-i2c4-data-clk-state {
@@ -2727,7 +2727,7 @@ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
pins = "gpio44", "gpio45";
function = "qup1_se4";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c5_data_clk: qup-i2c5-data-clk-state {
@@ -2735,7 +2735,7 @@ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
pins = "gpio52", "gpio53";
function = "qup1_se5";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c6_data_clk: qup-i2c6-data-clk-state {
@@ -2743,7 +2743,7 @@ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
pins = "gpio48", "gpio49";
function = "qup1_se6";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c8_data_clk: qup-i2c8-data-clk-state {
@@ -2751,14 +2751,14 @@ scl-pins {
pins = "gpio57";
function = "qup2_se0_l1_mira";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
sda-pins {
pins = "gpio56";
function = "qup2_se0_l0_mira";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
};
@@ -2767,7 +2767,7 @@ qup_i2c9_data_clk: qup-i2c9-data-clk-state {
pins = "gpio60", "gpio61";
function = "qup2_se1";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c10_data_clk: qup-i2c10-data-clk-state {
@@ -2775,7 +2775,7 @@ qup_i2c10_data_clk: qup-i2c10-data-clk-state {
pins = "gpio64", "gpio65";
function = "qup2_se2";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c11_data_clk: qup-i2c11-data-clk-state {
@@ -2783,7 +2783,7 @@ qup_i2c11_data_clk: qup-i2c11-data-clk-state {
pins = "gpio68", "gpio69";
function = "qup2_se3";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c12_data_clk: qup-i2c12-data-clk-state {
@@ -2791,7 +2791,7 @@ qup_i2c12_data_clk: qup-i2c12-data-clk-state {
pins = "gpio2", "gpio3";
function = "qup2_se4";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c13_data_clk: qup-i2c13-data-clk-state {
@@ -2799,7 +2799,7 @@ qup_i2c13_data_clk: qup-i2c13-data-clk-state {
pins = "gpio80", "gpio81";
function = "qup2_se5";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_i2c15_data_clk: qup-i2c15-data-clk-state {
@@ -2807,7 +2807,7 @@ qup_i2c15_data_clk: qup-i2c15-data-clk-state {
pins = "gpio72", "gpio106";
function = "qup2_se7";
drive-strength = <2>;
- bias-pull-up;
+ bias-pull-up = <2200>;
};
qup_spi0_cs: qup-spi0-cs-state {
--
2.34.1
Powered by blists - more mailing lists