linux-kernel - [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230209133507.150571-3-clement.leger@bootlin.com>
Date:   Thu,  9 Feb 2023 14:35:07 +0100
From:   Clément Léger <clement.leger@...tlin.com>
To:     Geert Uytterhoeven <geert+renesas@...der.be>,
        Magnus Damm <magnus.damm@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     Clément Léger <clement.leger@...tlin.com>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Herve Codina <herve.codina@...tlin.com>,
        Miquèl Raynal <miquel.raynal@...tlin.com>,
        Milan Stevanovic <milan.stevanovic@...com>,
        Jimmy Lalande <jimmy.lalande@...com>,
        Pascal Eberhard <pascal.eberhard@...com>,
        linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree

The EB board (Expansion board) supports both RZ/N1D and RZ-N1S. Since this
configuration targets only the RZ/N1D, it is named r9a06g032-rzn1d400-eb.
It adds support for the 2 additional switch ports (port C and D) that are
available on that board.

Signed-off-by: Clément Léger <clement.leger@...tlin.com>
---
 arch/arm/boot/dts/Makefile                  |  1 +
 arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts | 94 +++++++++++++++++++++
 2 files changed, 95 insertions(+)
 create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d08a3c450ce7..8938db01e939 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1123,6 +1123,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
 	r9a06g032-rzn1d400-db.dtb \
+	r9a06g032-rzn1d400-eb.dtb \
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1108-elgin-r1.dtb \
diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts
new file mode 100644
index 000000000000..c9de18d49fde
--- /dev/null
+++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZN1D-EB Board
+ *
+ * Copyright (C) 2023 Schneider-Electric
+ *
+ */
+
+#include "r9a06g032-rzn1d400-db.dts"
+
+/ {
+	model = "RZN1D-EB Board";
+	compatible = "renesas,rzn1d400-eb", "renesas,rzn1d400-db",
+		     "renesas,r9a06g032";
+};
+
+&mii_conv2 {
+	renesas,miic-input = <MIIC_SWITCH_PORTD>;
+	status = "okay";
+};
+
+&mii_conv3 {
+	renesas,miic-input = <MIIC_SWITCH_PORTC>;
+	status = "okay";
+};
+
+&pinctrl{
+	pins_eth1: pins-eth1 {
+		pinmux = <RZN1_PINMUX(12, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(13, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(14, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(15, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(16, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(17, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(18, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(19, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(20, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(21, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(22, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(23, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth2: pins-eth2 {
+		pinmux = <RZN1_PINMUX(24, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(25, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(26, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(27, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(28, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(29, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(30, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(31, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(32, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(33, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(34, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(35, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+};
+
+&switch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_eth1>, <&pins_eth2>, <&pins_eth3>, <&pins_eth4>,
+		    <&pins_mdio1>;
+
+	mdio {
+		/* CN15 and CN16 switches must be configured in MDIO2 mode */
+		switch0phy1: ethernet-phy@1 {
+			reg = <1>;
+			marvell,reg-init = <3 16 0 0x1010>;
+		};
+
+		switch0phy10: ethernet-phy@10 {
+			reg = <10>;
+			marvell,reg-init = <3 16 0 0x1010>;
+		};
+	};
+};
+
+&switch_port2 {
+	label = "lan2";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy10>;
+	status = "okay";
+};
+
+&switch_port3 {
+	label = "lan3";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy1>;
+	status = "okay";
+};
-- 
2.39.0