| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230210201029.wwle2j66cn7sv3v3@ripper>
Date: Fri, 10 Feb 2023 12:10:29 -0800
From: Bjorn Andersson <andersson@...nel.org>
To: Neil Armstrong <neil.armstrong@...aro.org>
Cc: Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 04/11] soc: qcom: pmic_glink: register ucsi aux device
On Fri, Feb 10, 2023 at 04:02:07PM +0100, Neil Armstrong wrote:
> Only register UCSI on know working devices, like on the SM8450
> or Sm8550 which requires UCSI to get USB mode switch events.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
> drivers/soc/qcom/pmic_glink.c | 67 ++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 57 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
> index bb3fb57abcc6..c7f091f4a8c1 100644
> --- a/drivers/soc/qcom/pmic_glink.c
> +++ b/drivers/soc/qcom/pmic_glink.c
> @@ -4,6 +4,7 @@
> * Copyright (c) 2022, Linaro Ltd
> */
> #include <linux/auxiliary_bus.h>
> +#include <linux/of_device.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/rpmsg.h>
> @@ -11,12 +12,23 @@
> #include <linux/soc/qcom/pdr.h>
> #include <linux/soc/qcom/pmic_glink.h>
>
> +enum {
> + PMIC_GLINK_CLIENT_BATT = 0,
> + PMIC_GLINK_CLIENT_ALTMODE,
> + PMIC_GLINK_CLIENT_UCSI,
> +};
> +
> +#define PMIC_GLINK_CLIENT_DEFAULT (BIT(PMIC_GLINK_CLIENT_BATT) | \
> + BIT(PMIC_GLINK_CLIENT_ALTMODE))
> +
> struct pmic_glink {
> struct device *dev;
> struct pdr_handle *pdr;
>
> struct rpmsg_endpoint *ept;
>
> + unsigned int client_mask;
> +
> struct auxiliary_device altmode_aux;
> struct auxiliary_device ps_aux;
> struct auxiliary_device ucsi_aux;
> @@ -231,8 +243,19 @@ static struct rpmsg_driver pmic_glink_rpmsg_driver = {
> },
> };
>
> +/* Do not handle altmode for now on those platforms */
> +static const unsigned int pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
> + BIT(PMIC_GLINK_CLIENT_UCSI);
> +
> +static const struct of_device_id pmic_glink_of_client_mask[] = {
> + { .compatible = "qcom,sm8450-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
> + { .compatible = "qcom,sm8550-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
> + {}
> +};
> +
> static int pmic_glink_probe(struct platform_device *pdev)
> {
> + const struct of_device_id *match;
> struct pdr_service *service;
> struct pmic_glink *pg;
> int ret;
> @@ -249,12 +272,27 @@ static int pmic_glink_probe(struct platform_device *pdev)
> mutex_init(&pg->client_lock);
> mutex_init(&pg->state_lock);
>
> - ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
> - if (ret)
> - return ret;
> - ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
> - if (ret)
> - goto out_release_altmode_aux;
> + match = of_match_device(pmic_glink_of_client_mask, &pdev->dev);
> + if (match)
> + pg->client_mask = *(const unsigned int *)match->data;
Make pmic_glink_sm8450_client_mask unsigned long instead, then it will
have the same size as void * and you don't need to dereference it
here...
> + else
> + pg->client_mask = PMIC_GLINK_CLIENT_DEFAULT;
Let's move these bits to pmic_glink_of_match[] to avoid having two
different of_device_id to keep in sync.
And hopefully we could have "qcom,pmic_glink" represent the case of
having all 3 bits set soon, and special case what you have as
"default" here...
Regards,
Bjorn
> +
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->ucsi_aux, "ucsi");
> + if (ret)
> + return ret;
> + }
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
> + if (ret)
> + goto out_release_ucsi_aux;
> + }
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
> + if (ret)
> + goto out_release_altmode_aux;
> + }
>
> pg->pdr = pdr_handle_alloc(pmic_glink_pdr_callback, pg);
> if (IS_ERR(pg->pdr)) {
> @@ -278,9 +316,14 @@ static int pmic_glink_probe(struct platform_device *pdev)
> out_release_pdr_handle:
> pdr_handle_release(pg->pdr);
> out_release_aux_devices:
> - pmic_glink_del_aux_device(pg, &pg->ps_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
> + pmic_glink_del_aux_device(pg, &pg->ps_aux);
> out_release_altmode_aux:
> - pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
> + pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> +out_release_ucsi_aux:
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
> + pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
>
> return ret;
> }
> @@ -291,8 +334,12 @@ static int pmic_glink_remove(struct platform_device *pdev)
>
> pdr_handle_release(pg->pdr);
>
> - pmic_glink_del_aux_device(pg, &pg->ps_aux);
> - pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
> + pmic_glink_del_aux_device(pg, &pg->ps_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
> + pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
> + pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
>
> mutex_lock(&__pmic_glink_lock);
> __pmic_glink = NULL;
>
> --
> 2.34.1
>
Powered by blists - more mailing lists