[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y+arDr+XTp85CDRc@spud>
Date: Fri, 10 Feb 2023 20:37:34 +0000
From: Conor Dooley <conor@...nel.org>
To: Trevor Woerner <twoerner@...il.com>
Cc: linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
linux-riscv@...ts.infradead.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev
Subject: Re: [PATCH v3 2/2] riscv: dts: nezha-d1: add gpio-line-names
Hey Trevor,
Just one thing about process sorta stuff, ordinarily a new version is
not posted as a reply to the last one.
If you look on lore, you'll see it looks a bit odd:
https://lore.kernel.org/all/20230210025132.36605-2-twoerner@gmail.com/
(scroll to "thread overview")
Tooling may/may not do the right thing w.r.t. testing/application of
the patches as a result.
On Thu, Feb 09, 2023 at 09:51:32PM -0500, Trevor Woerner wrote:
> Add descriptive names so users can associate specific lines with their
> respective pins on the 40-pin header according to the schematics.
>
> Signed-off-by: Trevor Woerner <twoerner@...il.com>
Comment looks nice & there are no more warnings from dtbs_check :)
Acked-by: Conor Dooley <conor.dooley@...rochip.com>
Thanks,
Conor.
> Link: http://dl.linux-sunxi.org/D1/D1_Nezha_development_board_schematic_diagram_20210224.pdf
> ---
> changes since v2:
> - (no changes, skip to a v3 to align with the other patch in this group)
>
> changes since v1:
> - this patch needs to be placed in order, and come second, after a patch to
> update the schema for the nxp,pcf8575, put this patch in a group where it
> wasn't previously
> - use a Link: to point to the schematic
> - add a comment section describing the rational behind the naming that was
> used
> - make the spacing of each line name uniform, don't try to "line them up"
> vertically
> ---
> .../boot/dts/allwinner/sun20i-d1-nezha.dts | 72 +++++++++++++++++++
> 1 file changed, 72 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
> index a0769185be97..4ed33c1e7c9c 100644
> --- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
> +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
> @@ -1,6 +1,25 @@
> // SPDX-License-Identifier: (GPL-2.0+ or MIT)
> // Copyright (C) 2021-2022 Samuel Holland <samuel@...lland.org>
>
> +/*
> + * gpio line names
> + *
> + * The Nezha-D1 has a 40-pin IO header. Some of these pins are routed
> + * directly to pads on the SoC, others come from an 8-bit pcf857x IO
> + * expander. Therefore, these line names are specified in two places:
> + * one set for the pcf857x, and one set for the pio controller.
> + *
> + * Lines which are routed to the 40-pin header are named as follows:
> + * <pin#> [<pin name>]
> + * where:
> + * <pin#> is the actual pin number of the 40-pin header
> + * <pin name> is the name of the pin by function/gpio#
> + *
> + * For details regarding pin numbers and names see the schematics (under
> + * "IO EXPAND"):
> + * http://dl.linux-sunxi.org/D1/D1_Nezha_development_board_schematic_diagram_20210224.pdf
> + */
> +
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
>
> @@ -90,6 +109,15 @@ pcf8574a: gpio@38 {
> gpio-controller;
> #gpio-cells = <2>;
> #interrupt-cells = <2>;
> + gpio-line-names =
> + "pin13 [gpio8]",
> + "pin16 [gpio10]",
> + "pin18 [gpio11]",
> + "pin26 [gpio17]",
> + "pin22 [gpio14]",
> + "pin28 [gpio19]",
> + "pin37 [gpio23]",
> + "pin11 [gpio6]";
> };
> };
>
> @@ -164,3 +192,47 @@ &usbphy {
> usb1_vbus-supply = <®_vcc>;
> status = "okay";
> };
> +
> +&pio {
> + gpio-line-names =
> + /* Port A */
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + /* Port B */
> + "pin5 [gpio2/twi2-sck]",
> + "pin3 [gpio1/twi2-sda]",
> + "",
> + "pin38 [gpio24/i2s2-din]",
> + "pin40 [gpio25/i2s2-dout]",
> + "pin12 [gpio7/i2s-clk]",
> + "pin35 [gpio22/i2s2-lrck]",
> + "",
> + "pin8 [gpio4/uart0-txd]",
> + "pin10 [gpio5/uart0-rxd]",
> + "",
> + "",
> + "pin15 [gpio9]",
> + "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + /* Port C */
> + "",
> + "pin31 [gpio21]",
> + "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + /* Port D */
> + "", "", "", "", "", "", "", "",
> + "", "",
> + "pin24 [gpio16/spi1-ce0]",
> + "pin23 [gpio15/spi1-clk]",
> + "pin19 [gpio12/spi1-mosi]",
> + "pin21 [gpio13/spi1-miso]",
> + "pin27 [gpio18/spi1-hold]",
> + "pin29 [gpio20/spi1-wp]",
> + "", "", "", "", "", "",
> + "pin7 [gpio3/pwm]";
> +};
> --
> 2.36.0.rc2.17.g4027e30c53
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists