| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c1bf45a868edcd3df5263fa76a32b28e6c9ca3d1.1676042188.git.asmaa@nvidia.com>
Date: Fri, 10 Feb 2023 10:39:40 -0500
From: Asmaa Mnebhi <asmaa@...dia.com>
To: <linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-acpi@...r.kernel.org>
CC: Asmaa Mnebhi <asmaa@...dia.com>
Subject: [PATCH v3 1/2] Support NVIDIA BlueField-3 GPIO controller
This patch adds support for the BlueField-3 SoC GPIO driver
which allows:
- setting certain GPIOs as interrupts from other dependent drivers
- ability to manipulate certain GPIO pins via libgpiod tools
BlueField-3 has 56 GPIOs but the user is only allowed to change some
of them into GPIO mode. Use valid_mask to make it impossible to alter
the rest of the GPIOs.
Signed-off-by: Asmaa Mnebhi <asmaa@...dia.com>
---
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-mlxbf3.c | 262 +++++++++++++++++++++++++++++++++++++
3 files changed, 270 insertions(+)
create mode 100644 drivers/gpio/gpio-mlxbf3.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ec7cfd4f52b1..3d56a83db284 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1534,6 +1534,13 @@ config GPIO_MLXBF2
help
Say Y here if you want GPIO support on Mellanox BlueField 2 SoC.
+config GPIO_MLXBF3
+ tristate "Mellanox BlueField 3 SoC GPIO"
+ depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST)
+ select GPIO_GENERIC
+ help
+ Say Y here if you want GPIO support on Mellanox BlueField 3 SoC.
+
config GPIO_ML_IOH
tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
depends on X86 || COMPILE_TEST
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 010587025fc8..76545ca31457 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o
obj-$(CONFIG_GPIO_MLXBF2) += gpio-mlxbf2.o
+obj-$(CONFIG_GPIO_MLXBF3) += gpio-mlxbf3.o
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o
obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o
diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c
new file mode 100644
index 000000000000..ddd27c316035
--- /dev/null
+++ b/drivers/gpio/gpio-mlxbf3.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause
+
+/*
+ * Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES
+ */
+
+#include <linux/acpi.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+
+/*
+ * There are 2 YU GPIO blocks:
+ * gpio[0]: HOST_GPIO0->HOST_GPIO31
+ * gpio[1]: HOST_GPIO32->HOST_GPIO55
+ */
+#define MLXBF3_GPIO_MAX_PINS_PER_BLOCK 32
+
+/*
+ * fw_gpio[x] block registers and their offset
+ */
+#define MLXBF_GPIO_FW_OUTPUT_ENABLE_SET 0x04
+#define MLXBF_GPIO_FW_DATA_OUT_SET 0x08
+#define MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR 0x18
+#define MLXBF_GPIO_FW_DATA_OUT_CLEAR 0x1c
+#define MLXBF_GPIO_CAUSE_RISE_EN 0x28
+#define MLXBF_GPIO_CAUSE_FALL_EN 0x2c
+#define MLXBF_GPIO_READ_DATA_IN 0x30
+
+#define MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x00
+#define MLXBF_GPIO_CAUSE_OR_EVTEN0 0x14
+#define MLXBF_GPIO_CAUSE_OR_CLRCAUSE 0x18
+
+struct mlxbf3_gpio_context {
+ struct gpio_chip gc;
+ struct irq_chip irq_chip;
+
+ /* YU GPIO block address */
+ void __iomem *gpio_io;
+
+ /* YU GPIO cause block address */
+ void __iomem *gpio_cause_io;
+
+ /* Mask of valid gpios that can be accessed by software */
+ unsigned int valid_mask;
+};
+
+static void mlxbf3_gpio_irq_enable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc);
+ int offset = irqd_to_hwirq(irqd);
+ unsigned long flags;
+ u32 val;
+
+ raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
+ writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE);
+
+ val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
+ val |= BIT(offset);
+ writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
+ raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
+}
+
+static void mlxbf3_gpio_irq_disable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc);
+ int offset = irqd_to_hwirq(irqd);
+ unsigned long flags;
+ u32 val;
+
+ raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
+ val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
+ val &= ~BIT(offset);
+ writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0);
+ raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
+}
+
+static irqreturn_t mlxbf3_gpio_irq_handler(int irq, void *ptr)
+{
+ struct mlxbf3_gpio_context *gs = ptr;
+ struct gpio_chip *gc = &gs->gc;
+ unsigned long pending;
+ u32 level;
+
+ pending = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0);
+ writel(pending, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE);
+
+ for_each_set_bit(level, &pending, gc->ngpio)
+ generic_handle_irq(irq_find_mapping(gc->irq.domain, level));
+
+ return IRQ_RETVAL(pending);
+}
+
+static int
+mlxbf3_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc);
+ int offset = irqd_to_hwirq(irqd);
+ unsigned long flags;
+ bool fall = false;
+ bool rise = false;
+ u32 val;
+
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_BOTH:
+ fall = true;
+ rise = true;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ rise = true;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ fall = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
+ if (fall) {
+ val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
+ val |= BIT(offset);
+ writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN);
+ }
+
+ if (rise) {
+ val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
+ val |= BIT(offset);
+ writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN);
+ }
+ raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
+
+ return 0;
+}
+
+static int mlxbf3_gpio_init_valid_mask(struct gpio_chip *gc,
+ unsigned long *valid_mask,
+ unsigned int ngpios)
+{
+ struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc);
+
+ *valid_mask = gs->valid_mask;
+
+ return 0;
+}
+
+static int
+mlxbf3_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mlxbf3_gpio_context *gs;
+ unsigned int npins, valid_mask;
+ struct gpio_irq_chip *girq;
+ struct gpio_chip *gc;
+ struct resource *res;
+ const char *name;
+ int ret, irq;
+
+ name = dev_name(dev);
+
+ gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL);
+ if (!gs)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ /* Resource shared with pinctrl driver */
+ gs->gpio_io = devm_ioremap(dev, res->start, resource_size(res));
+ if (!gs->gpio_io)
+ return -ENOMEM;
+
+ /* YU GPIO block address */
+ gs->gpio_cause_io = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(gs->gpio_cause_io))
+ return PTR_ERR(gs->gpio_cause_io);
+
+ if (device_property_read_u32(dev, "npins", &npins))
+ npins = MLXBF3_GPIO_MAX_PINS_PER_BLOCK;
+
+ if (device_property_read_u32(dev, "valid_mask", &valid_mask))
+ valid_mask = 0x0;
+
+ gs->valid_mask = valid_mask;
+
+ gc = &gs->gc;
+
+ ret = bgpio_init(gc, dev, 4,
+ gs->gpio_io + MLXBF_GPIO_READ_DATA_IN,
+ gs->gpio_io + MLXBF_GPIO_FW_DATA_OUT_SET,
+ gs->gpio_io + MLXBF_GPIO_FW_DATA_OUT_CLEAR,
+ gs->gpio_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_SET,
+ gs->gpio_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR, 0);
+
+ gc->request = gpiochip_generic_request;
+ gc->free = gpiochip_generic_free;
+ gc->init_valid_mask = mlxbf3_gpio_init_valid_mask;
+
+ gc->ngpio = npins;
+ gc->owner = THIS_MODULE;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0) {
+ gs->irq_chip.name = name;
+ gs->irq_chip.irq_set_type = mlxbf3_gpio_irq_set_type;
+ gs->irq_chip.irq_enable = mlxbf3_gpio_irq_enable;
+ gs->irq_chip.irq_disable = mlxbf3_gpio_irq_disable;
+
+ girq = &gs->gc.irq;
+ girq->chip = &gs->irq_chip;
+ girq->handler = handle_simple_irq;
+ girq->default_type = IRQ_TYPE_NONE;
+ /* This will let us handle the parent IRQ in the driver */
+ girq->num_parents = 0;
+ girq->parents = NULL;
+ girq->parent_handler = NULL;
+
+ /*
+ * Directly request the irq here instead of passing
+ * a flow-handler because the irq is shared.
+ */
+ ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler,
+ IRQF_SHARED, name, gs);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ");
+ return ret;
+ }
+ }
+
+ platform_set_drvdata(pdev, gs);
+
+ ret = devm_gpiochip_add_data(dev, &gs->gc, gs);
+ if (ret) {
+ dev_err(dev, "Failed adding memory mapped gpiochip\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct acpi_device_id __maybe_unused mlxbf3_gpio_acpi_match[] = {
+ { "MLNXBF33", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, mlxbf3_gpio_acpi_match);
+
+static struct platform_driver mlxbf3_gpio_driver = {
+ .driver = {
+ .name = "mlxbf3_gpio",
+ .acpi_match_table = mlxbf3_gpio_acpi_match,
+ },
+ .probe = mlxbf3_gpio_probe,
+};
+
+module_platform_driver(mlxbf3_gpio_driver);
+
+MODULE_DESCRIPTION("NVIDIA BlueField-3 GPIO Driver");
+MODULE_AUTHOR("Asmaa Mnebhi <asmaa@...dia.com>");
+MODULE_LICENSE("Dual BSD/GPL");
--
2.30.1
Powered by blists - more mailing lists