lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230210172822.12960-1-richard@routerhints.com>
Date:   Fri, 10 Feb 2023 20:28:23 +0300
From:   arinc9.unal@...il.com
To:     Sean Wang <sean.wang@...iatek.com>,
        Landen Chao <Landen.Chao@...iatek.com>,
        DENG Qingfang <dqfext@...il.com>, Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
Cc:     Richard van Schagen <richard@...terhints.com>,
        Arınç ÜNAL <arinc.unal@...nc9.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, erkin.bozoglu@...ont.com
Subject: [PATCH net] net: dsa: mt7530: fix CPU flooding and do not set CPU association

From: Richard van Schagen <richard@...terhints.com>

The original code only enables flooding on CPU port, on port 6, since
that's the last one set up. In doing so, it removes flooding on port 5,
which made so that, in order to communicate properly over port 5, a frame
had to be sent from a user port to the DSA master. Fix this.

Since CPU->port is forced via the DSA tag, connecting CPU to all user ports
of the switch breaks communication over VLAN tagged frames. Therefore,
remove the code that sets CPU assocation. This way, the CPU reverts to not
being connected to any port as soon as ".port_enable" is called.

[ arinc.unal@...nc9.com: Wrote subject and changelog ]

Tested-by: Arınç ÜNAL <arinc.unal@...nc9.com>
Signed-off-by: Richard van Schagen <richard@...terhints.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
 drivers/net/dsa/mt7530.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 3a15015bc409..b5ad4b4fc00c 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -997,6 +997,7 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
 {
 	struct mt7530_priv *priv = ds->priv;
 	int ret;
+	u32 val;
 
 	/* Setup max capability of CPU port at first */
 	if (priv->info->cpu_port_config) {
@@ -1009,20 +1010,15 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
 	mt7530_write(priv, MT7530_PVC_P(port),
 		     PORT_SPEC_TAG);
 
-	/* Disable flooding by default */
-	mt7530_rmw(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK,
-		   BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port)));
+	/* Enable flooding on CPU */
+	val = mt7530_read(priv, MT7530_MFC);
+	val |= BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port));
+	mt7530_write(priv, MT7530_MFC, val);
 
 	/* Set CPU port number */
 	if (priv->id == ID_MT7621)
 		mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
 
-	/* CPU port gets connected to all user ports of
-	 * the switch.
-	 */
-	mt7530_write(priv, MT7530_PCR_P(port),
-		     PCR_MATRIX(dsa_user_ports(priv->ds)));
-
 	/* Set to fallback mode for independent VLAN learning */
 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
 		   MT7530_PORT_FALLBACK_MODE);
@@ -2204,6 +2200,9 @@ mt7530_setup(struct dsa_switch *ds)
 
 	priv->p6_interface = PHY_INTERFACE_MODE_NA;
 
+	/* Disable flooding by default */
+	mt7530_rmw(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK, 0);
+
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);
 
-- 
2.37.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ