[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y+lHiZRDH9brl3FR@imac101>
Date: Sun, 12 Feb 2023 21:09:45 +0100
From: Alain Volmat <avolmat@...com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Patrice Chotard <patrice.chotard@...s.st.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: arm: sti: addition of STi platform
syscon
Thanks for the review.
On Sun, Feb 12, 2023 at 05:00:24PM +0100, Krzysztof Kozlowski wrote:
> Thank you for your patch. There is something to discuss/improve. Few nits.
>
> On 11/02/2023 22:04, Alain Volmat wrote:
> > Addition of the various STi platform syscon node description.
>
> Use imperative.
> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
>
> >
> > Signed-off-by: Alain Volmat <avolmat@...com>
> > ---
> > .../bindings/arm/sti/st,sti-syscon.yaml | 46 +++++++++++++++++++
> > 1 file changed, 46 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml b/Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml
> > new file mode 100644
> > index 000000000000..e4bbc90694b3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/sti/st,sti-syscon.yaml
> > @@ -0,0 +1,46 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/arm/sti/st,sti-syscon.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: STMicroelectronics STi platform sysconfig entries
>
>
> Drop "entries", does not look related to hardware.
>
> > +
> > +maintainers:
> > + - Patrice Chotard <patrice.chotard@...s.st.com>
> > +
> > +description: |
> > + Binding for the various sysconfig nodes used within the STi
> > + platform device-tree to point to some common configuration
> > + registers used by other nodes.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - st,stih407-sbc-syscfg
> > + - st,stih407-front-syscfg
> > + - st,stih407-rear-syscfg
> > + - st,stih407-flash-syscfg
> > + - st,stih407-sbc-reg-syscfg
> > + - st,stih407-core-syscfg
> > + - st,stih407-lpm-syscfg
>
> How about putting them in some order?
Ok, changed to alphabet order
>
> > + - const: syscon
> > +
> > + reg:
> > + maxItems: 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + syscfg_sbc: sbc-syscfg@...0000 {
>
> Generic node names, thus usually syscon or system-controller
Ok, changed to syscfg_sbc: syscon@...0000
I also move the file within bindings/soc/sti as mentioned in your other
reply.
> > +...
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists