Message-ID: <Y+p6URWLBPd6VUHD@li-bb2b2a4c-3307-11b2-a85c-8fa5c3a69313.ibm.com>
Date:   Mon, 13 Feb 2023 23:28:41 +0530
From:   Ojaswin Mujoo <ojaswin@...ux.ibm.com>
To:     Jan Kara <jack@...e.cz>
Cc:     linux-ext4@...r.kernel.org, "Theodore Ts'o" <tytso@....edu>,
        Ritesh Harjani <riteshh@...ux.ibm.com>,
        linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org,
        rookxu <brookxu.cn@...il.com>,
        Ritesh Harjani <ritesh.list@...il.com>
Subject: Re: [PATCH v3 7/8] ext4: Use rbtrees to manage PAs instead of inode
 i_prealloc_list

Hi Jan!

On Fri, Feb 10, 2023 at 03:37:53PM +0100, Jan Kara wrote:
> On Thu 09-02-23 23:24:31, Ojaswin Mujoo wrote:
> > On Thu, Feb 09, 2023 at 11:54:18AM +0100, Jan Kara wrote:
> > > On Wed 08-02-23 16:55:05, Ojaswin Mujoo wrote:
> > > > On Fri, Feb 03, 2023 at 02:06:56PM +0530, Ojaswin Mujoo wrote:
> > > > > On Fri, Jan 27, 2023 at 03:43:12PM +0100, Jan Kara wrote:
> > > > > > 
> > > > > > Well, I think cond_resched() + goto retry would be OK here. We could also
> > > > > > cycle the corresponding group lock which would wait for
> > > > > > ext4_mb_discard_group_preallocations() to finish but that is going to burn
> > > > > > the CPU even more than the cond_resched() + retry as we'll be just spinning
> > > > > > on the spinlock. Sleeping is IMHO not warranted as the whole
> > > > > > ext4_mb_discard_group_preallocations() is running under a spinlock anyway
> > > > > > so it should better be a very short sleep.
> > > > > > 
> > > > > > Or actually I have one more possible solution: What the adjusting function
> > > > > > is doing that it looks up PA before and after ac->ac_o_ex.fe_logical and
> > > > > > trims start & end to not overlap these PAs. So we could just lookup these
> > > > > > two PAs (ignoring the deleted state) and then just iterate from these with
> > > > > > rb_prev() & rb_next() until we find not-deleted ones. What do you think? 
> > > > > 
> > > > > Hey Jan, 
> > > > > 
> > > > > Just thought I'd update you, I'm trying this solution out, and it looks
> > > > > good but I'm hitting a few bugs in the implementation. Will update here
> > > > > once I have it working correctly.
> > > > 
> > > > Alright, so after spending some time on these bugs I'm hitting I'm
> > > > seeing some strange behavior. Basically, it seems like in scenarios
> > > > where we are not able to allocate as many block as the normalized goal
> > > > request, we can sometimes end up adding a PA that overlaps with existing
> > > > PAs in the inode PA list/tree. This behavior exists even before this
> > > > particular patchset. Due to presence of such overlapping PAs, the above
> > > > logic was failing in some cases.
> > > > 
> > > > From my understanding of the code, this seems to be a BUG. We should not
> > > > be adding overlapping PA ranges as that causes us to preallocate
> > > > multiple blocks for the same logical offset in a file, however I would
> > > > also like to know if my understanding is incorrect and if this is an
> > > > intended behavior.
> > > > 
> > > > ----- Analysis of the issue ------
> > > > 
> > > > Here's my analysis of the behavior, which I did by adding some BUG_ONs
> > > > and running generic/269 (4k bs). It happens pretty often, like once
> > > > every 5-10 runs. Testing was done without applying this patch series on
> > > > the Ted's dev branch.
> > > > 
> > > > 1. So taking an example of a real scenario I hit. After we find the best
> > > > len possible, we enter the ext4_mb_new_inode_pa() function with the
> > > > following values for start and end of the extents:
> > > > 
> > > > ## format: <start>/<end>(<len>)
> > > > orig_ex:503/510(7) goal_ex:0/512(512) best_ex:0/394(394)
> > > > 
> > > > 2. Since (best_ex len < goal_ex len) we enter the PA window adjustment
> > > > if condition here:
> > > > 
> > > > 	if (ac->ac_b_ex.fe_len < ac->ac_g_ex.fe_len)
> > > > 		...
> > > > 	}
> > > > 
> > > > 3. Here, we calc wins, winl and off and adjust logical start and end of
> > > > the best found extent. The idea is to make sure that the best extent
> > > > atleast covers the original request. In this example, the values are:
> > > > 
> > > > winl:503 wins:387 off:109
> > > > 
> > > > and win = min(winl, wins, off) = 109
> > > > 
> > > > 4. We then adjust the logical start of the best ex as:
> > > > 
> > > > 		ac->ac_b_ex.fe_logical = ac->ac_o_ex.fe_logical - EXT4_NUM_B2C(sbi, win);
> > > > 
> > > > which makes the new best extent as:
> > > > 
> > > > best_ex: 394/788(394)
> > > > 
> > > > As we can see, the best extent overflows outside the goal range, and
> > > > hence we don't have any guarentee anymore that it will not overlap with
> > > > another PA since we only check overlaps with the goal start and end.
> > > > We then initialze the new PA with the logical start and end of the best
> > > > extent and finaly add it to the inode PA list.
> > > > 
> > > > In my testing I was able to actually see overlapping PAs being added to
> > > > the inode list.
> > > > 
> > > > ----------- END ---------------
> > > > 
> > > > Again, I would like to know if this is a BUG or intended. If its a BUG,
> > > > is it okay for us to make sure the adjusted best extent length doesn't 
> > > > extend the goal length? 
> > > 
> > > Good spotting. So I guess your understanding of mballoc is better than mine
> > > by now :) but at least in my mental model I would also expect the resulting
> > > preallocation to stay withing the goal extent. What is causing here the
> > > issue is this code in ext4_mb_new_inode_pa():
> > > 
> > >                 offs = ac->ac_o_ex.fe_logical %
> > >                         EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
> > >                 if (offs && offs < win)
> > >                         win = offs;
> > > 
> > > so we apparently try to align the logical offset of the allocation to a
> > > multiple of the allocated size but that just does not make much sense when
> > 
> > Yep, it is indeed the offset calculation that is cauing issues in this
> > particular example. Any idea why this was originally added?
> 
> So I belive mballoc tries to align everything (offsets & lengths) to powers
> of two to reduce fragmentation and simplify the work for the buddy allocator.
> If ac->ac_b_ex.fe_len is a power-of-two, the alignment makes sense. But
> once we had to resort to higher allocator passes and just got some
> random-length extent, the alignment stops making sense.

Got it, thanks for clarifying.
> 
> > > we found some random leftover extent with shorter-than-goal size. So what
> > > I'd do in the shorter-than-goal preallocation case is:
> > > 
> > > 1) If we can place the allocation at the end of goal window and still cover
> > > the original allocation request, do that.
> > > 
> > > 2) Otherwise if we can place the allocation at the start of the goal
> > > window and still cover the original allocation request, do that.
> > > 
> > > 3) Otherwise place the allocation at the start of the original allocation
> > > request.
> > > 
> > > This would seem to reasonably reduce fragmentation of preallocated space
> > > and still keep things simple.
> > This looks like a good approach to me and it will take care of the issue
> > caused due to offset calculation.
> > 
> > However, after commenting out the offset calculation bit in PA window
> > adjustment logic, I noticed that there is one more way that such an
> > overflow can happen, which would need to be addressed before we can
> > implement the above approach. Basically, this happens when we end up
> > with a goal len greater than the original len.
> 
> You probably mean goal end block smaller than original end block here... At
> least that's what you speak about below.

Right, my bad :)

> 
> > See my comments at the end for more info.
> > 
> > > 
> > > > Also, another thing I noticed is that after ext4_mb_normalize_request(),
> > > > sometimes the original range can also exceed the normalized goal range,
> > > > which is again was a bit surprising to me since my understanding was
> > > > that normalized range would always encompass the orignal range.
> > > 
> > > Well, isn't that because (part of) the requested original range is already
> > > preallocated? Or what causes the goal range to be shortened?
> > > 
> > Yes I think that pre existing PAs could be one of the cases.
> > 
> > Other than that, I'm also seeing some cases of sparse writes which can cause
> > ext4_mb_normalize_request() to result in having an original range that
> > overflows out of the goal range. For example, I observed these values just
> > after the if else if else conditions in the function, before we check if range
> > overlaps pre existing PAs:
> > 
> > orig_ex:2045/2055(len:10) normalized_range:0/2048, orig_isize:8417280
> > 
> > Basically, since isize is large and we are doing a sparse write, we end
> > up in the following if condition:
> > 
> > 	} else if (NRL_CHECK_SIZE(ac->ac_o_ex.fe_len,
> > 								(8<<20)>>bsbits, max, 8 * 1024)) {
> > 		start_off = ((loff_t)ac->ac_o_ex.fe_logical >> (23 - bsbits)) << 23;
> > 		size = 8 * 1024 * 1024;
> >  }
> > 
> > Resulting in normalized range less than original range.
> 
> I see.
> 
> > Now, in any case, once we get such an overflow, if we try to enter the PA
> > adjustment window in ext4_mb_new_inode_pa() function, we will again end
> > up with a best extent overflowing out of goal extent since we would try
> > to cover the original extent. 
> > 
> > So yeah, seems like there are 2 cases where we could result in
> > overlapping PAs:
> > 
> > 1. Due to off calculation in PA adjustment window, as we discussed.  2.
> > Due to original extent overflowing out of goal extent.
> > 
> > I think the 3 step solution you proposed works well to counter 1 but not
> > 2, so we probably need some more logic on top of your solution to take
> > care of that.  I'll think some more on how to fix this but I think this
> > will be as a separate patch.
> 
> Well, my algorithm will still result in preallocation being within the goal
> range AFAICS. In the example above we had:
> 
> Orig 2045/2055 Goal 0/2048
> 
> Suppose we found 200 blocks. So we try placing preallocation like:
> 
> 1848/2048, it covers the original starting block 2045 so we are fine and
> create preallocation 1848/2048. Nothing has overflown the goal window...
> 
> 								Honza
Ahh okay, I though you meant checking if we covered the complete
original range instead of just the original start. In that case we
should be good.

However, I still feel that the example where we unnecessarily end up with 
a lesser goal len than original len should not happen. Maybe in
ext4_mb_normalize_request(), instead of hardcording the goal lengths for
different i_sizes, we can select the next power of 2 greater than our
original length or some similar heuristic. What do you think?

Regards,
ojaswin
> -- 
> Jan Kara <jack@...e.com>
> SUSE Labs, CR

Powered by blists - more mailing lists