| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230213202734.uetonoessrmelquf@mercury.elektranox.org>
Date: Mon, 13 Feb 2023 21:27:34 +0100
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Bjorn Andersson <quic_bjorande@...cinc.com>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
linux-arm-msm@...r.kernel.org,
Neil Armstrong <neil.armstrong@...aro.org>
Subject: Re: [PATCH v5] power: supply: Introduce Qualcomm PMIC GLINK power
supply
Hi,
On Tue, Feb 07, 2023 at 06:42:41AM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@...aro.org>
>
> The PMIC GLINK service, running on a coprocessor of modern Qualcomm
> platforms, deals with battery charging and fuel gauging, as well as
> reporting status of AC and wireless power supplies.
>
> As this is just one of the functionalities provided by the PMIC GLINK
> service, this power supply driver is implemented as an auxilirary bus
> driver, spawned by the main "pmic glink" driver when the PMIC GLINK
> service is detected.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Tested-by: Konrad Dybcio <konrad.dybcio@...aro.org> # SM8350 PDX215
> Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>
> Tested-by: Neil Armstrong <neil.armstrong@...aro.org> # on SM8550-MTP & SM8450-HDK
> Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
> ---
>
> Changes since v4:
> - Changed to module_auxiliary_driver()
>
> Sebastian, I merged the other patches from v4 for v6.3 in the qcom tree
> and pushed this to:
> https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git
> qcom-linux/20230201041853.1934355-1-quic_bjorande@...cinc.com
>
> I'd be happy to pick this through the Qualcomm tree if you find that
> more convenient.
Please do , if you want to land this in 6.3. My tree does not have
QCOM_PMIC_GLINK, so I cannot even compile test.
Acked-by: Sebastian Reichel <sebastian.reichel@...labora.com>
-- Sebastian
>
> Thanks,
>
> drivers/power/supply/Kconfig | 9 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/qcom_battmgr.c | 1411 +++++++++++++++++++++++++++
> 3 files changed, 1421 insertions(+)
> create mode 100644 drivers/power/supply/qcom_battmgr.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 6a32f022943b..c78be9f322e6 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -174,6 +174,15 @@ config BATTERY_PMU
> Say Y here to expose battery information on Apple machines
> through the generic battery class.
>
> +config BATTERY_QCOM_BATTMGR
> + tristate "Qualcomm PMIC GLINK battery manager support"
> + depends on QCOM_PMIC_GLINK
> + select AUXILIARY_BUS
> + help
> + Say Y here to enable the Qualcomm PMIC GLINK power supply driver,
> + which is used on modern Qualcomm platforms to provide battery and
> + power supply information.
> +
> config BATTERY_OLPC
> tristate "One Laptop Per Child battery"
> depends on OLPC_EC
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index 3aec9bc10f3c..4adbfba02d05 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -33,6 +33,7 @@ obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o
> obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o
> obj-$(CONFIG_BATTERY_LEGO_EV3) += lego_ev3_battery.o
> obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
> +obj-$(CONFIG_BATTERY_QCOM_BATTMGR) += qcom_battmgr.o
> obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
> obj-$(CONFIG_BATTERY_SAMSUNG_SDI) += samsung-sdi-battery.o
> obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
> diff --git a/drivers/power/supply/qcom_battmgr.c b/drivers/power/supply/qcom_battmgr.c
> new file mode 100644
> index 000000000000..ec31f887184f
> --- /dev/null
> +++ b/drivers/power/supply/qcom_battmgr.c
> @@ -0,0 +1,1411 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022, Linaro Ltd
> + */
> +#include <linux/auxiliary_bus.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/soc/qcom/pdr.h>
> +#include <linux/soc/qcom/pmic_glink.h>
> +#include <linux/math.h>
> +#include <linux/units.h>
> +
> +#define BATTMGR_CHEMISTRY_LEN 4
> +#define BATTMGR_STRING_LEN 128
> +
> +enum qcom_battmgr_variant {
> + QCOM_BATTMGR_SM8350,
> + QCOM_BATTMGR_SC8280XP,
> +};
> +
> +#define BATTMGR_BAT_STATUS 0x1
> +
> +#define BATTMGR_REQUEST_NOTIFICATION 0x4
> +
> +#define BATTMGR_NOTIFICATION 0x7
> +#define NOTIF_BAT_PROPERTY 0x30
> +#define NOTIF_USB_PROPERTY 0x32
> +#define NOTIF_WLS_PROPERTY 0x34
> +#define NOTIF_BAT_INFO 0x81
> +#define NOTIF_BAT_STATUS 0x80
> +
> +#define BATTMGR_BAT_INFO 0x9
> +
> +#define BATTMGR_BAT_DISCHARGE_TIME 0xc
> +
> +#define BATTMGR_BAT_CHARGE_TIME 0xd
> +
> +#define BATTMGR_BAT_PROPERTY_GET 0x30
> +#define BATTMGR_BAT_PROPERTY_SET 0x31
> +#define BATT_STATUS 0
> +#define BATT_HEALTH 1
> +#define BATT_PRESENT 2
> +#define BATT_CHG_TYPE 3
> +#define BATT_CAPACITY 4
> +#define BATT_SOH 5
> +#define BATT_VOLT_OCV 6
> +#define BATT_VOLT_NOW 7
> +#define BATT_VOLT_MAX 8
> +#define BATT_CURR_NOW 9
> +#define BATT_CHG_CTRL_LIM 10
> +#define BATT_CHG_CTRL_LIM_MAX 11
> +#define BATT_TEMP 12
> +#define BATT_TECHNOLOGY 13
> +#define BATT_CHG_COUNTER 14
> +#define BATT_CYCLE_COUNT 15
> +#define BATT_CHG_FULL_DESIGN 16
> +#define BATT_CHG_FULL 17
> +#define BATT_MODEL_NAME 18
> +#define BATT_TTF_AVG 19
> +#define BATT_TTE_AVG 20
> +#define BATT_RESISTANCE 21
> +#define BATT_POWER_NOW 22
> +#define BATT_POWER_AVG 23
> +
> +#define BATTMGR_USB_PROPERTY_GET 0x32
> +#define BATTMGR_USB_PROPERTY_SET 0x33
> +#define USB_ONLINE 0
> +#define USB_VOLT_NOW 1
> +#define USB_VOLT_MAX 2
> +#define USB_CURR_NOW 3
> +#define USB_CURR_MAX 4
> +#define USB_INPUT_CURR_LIMIT 5
> +#define USB_TYPE 6
> +#define USB_ADAP_TYPE 7
> +#define USB_MOISTURE_DET_EN 8
> +#define USB_MOISTURE_DET_STS 9
> +
> +#define BATTMGR_WLS_PROPERTY_GET 0x34
> +#define BATTMGR_WLS_PROPERTY_SET 0x35
> +#define WLS_ONLINE 0
> +#define WLS_VOLT_NOW 1
> +#define WLS_VOLT_MAX 2
> +#define WLS_CURR_NOW 3
> +#define WLS_CURR_MAX 4
> +#define WLS_TYPE 5
> +#define WLS_BOOST_EN 6
> +
> +struct qcom_battmgr_enable_request {
> + struct pmic_glink_hdr hdr;
> + __le32 battery_id;
> + __le32 power_state;
> + __le32 low_capacity;
> + __le32 high_capacity;
> +};
> +
> +struct qcom_battmgr_property_request {
> + struct pmic_glink_hdr hdr;
> + __le32 battery;
> + __le32 property;
> + __le32 value;
> +};
> +
> +struct qcom_battmgr_update_request {
> + struct pmic_glink_hdr hdr;
> + u32 battery_id;
> +};
> +
> +struct qcom_battmgr_charge_time_request {
> + struct pmic_glink_hdr hdr;
> + __le32 battery_id;
> + __le32 percent;
> + __le32 reserved;
> +};
> +
> +struct qcom_battmgr_discharge_time_request {
> + struct pmic_glink_hdr hdr;
> + __le32 battery_id;
> + __le32 rate; /* 0 for current rate */
> + __le32 reserved;
> +};
> +
> +struct qcom_battmgr_message {
> + struct pmic_glink_hdr hdr;
> + union {
> + struct {
> + __le32 property;
> + __le32 value;
> + __le32 result;
> + } intval;
> + struct {
> + __le32 property;
> + char model[BATTMGR_STRING_LEN];
> + } strval;
> + struct {
> + /*
> + * 0: mWh
> + * 1: mAh
> + */
> + __le32 power_unit;
> + __le32 design_capacity;
> + __le32 last_full_capacity;
> + /*
> + * 0 nonrechargable
> + * 1 rechargable
> + */
> + __le32 battery_tech;
> + __le32 design_voltage; /* mV */
> + __le32 capacity_low;
> + __le32 capacity_warning;
> + __le32 cycle_count;
> + /* thousandth of persent */
> + __le32 accuracy;
> + __le32 max_sample_time_ms;
> + __le32 min_sample_time_ms;
> + __le32 max_average_interval_ms;
> + __le32 min_average_interval_ms;
> + /* granularity between low and warning */
> + __le32 capacity_granularity1;
> + /* granularity between warning and full */
> + __le32 capacity_granularity2;
> + /*
> + * 0: no
> + * 1: cold
> + * 2: hot
> + */
> + __le32 swappable;
> + __le32 capabilities;
> + char model_number[BATTMGR_STRING_LEN];
> + char serial_number[BATTMGR_STRING_LEN];
> + char battery_type[BATTMGR_STRING_LEN];
> + char oem_info[BATTMGR_STRING_LEN];
> + char battery_chemistry[BATTMGR_CHEMISTRY_LEN];
> + char uid[BATTMGR_STRING_LEN];
> + __le32 critical_bias;
> + u8 day;
> + u8 month;
> + __le16 year;
> + __le32 battery_id;
> + } info;
> + struct {
> + /*
> + * BIT(0) discharging
> + * BIT(1) charging
> + * BIT(2) critical low
> + */
> + __le32 battery_state;
> + /* mWh or mAh, based on info->power_unit */
> + __le32 capacity;
> + __le32 rate;
> + /* mv */
> + __le32 battery_voltage;
> + /*
> + * BIT(0) power online
> + * BIT(1) discharging
> + * BIT(2) charging
> + * BIT(3) battery critical
> + */
> + __le32 power_state;
> + /*
> + * 1: AC
> + * 2: USB
> + * 3: Wireless
> + */
> + __le32 charging_source;
> + __le32 temperature;
> + } status;
> + __le32 time;
> + __le32 notification;
> + };
> +};
> +
> +#define BATTMGR_CHARGING_SOURCE_AC 1
> +#define BATTMGR_CHARGING_SOURCE_USB 2
> +#define BATTMGR_CHARGING_SOURCE_WIRELESS 3
> +
> +enum qcom_battmgr_unit {
> + QCOM_BATTMGR_UNIT_mWh = 0,
> + QCOM_BATTMGR_UNIT_mAh = 1
> +};
> +
> +struct qcom_battmgr_info {
> + bool valid;
> +
> + bool present;
> + unsigned int charge_type;
> + unsigned int design_capacity;
> + unsigned int last_full_capacity;
> + unsigned int voltage_max_design;
> + unsigned int voltage_max;
> + unsigned int capacity_low;
> + unsigned int capacity_warning;
> + unsigned int cycle_count;
> + unsigned int charge_count;
> + char model_number[BATTMGR_STRING_LEN];
> + char serial_number[BATTMGR_STRING_LEN];
> + char oem_info[BATTMGR_STRING_LEN];
> + unsigned char technology;
> + unsigned char day;
> + unsigned char month;
> + unsigned short year;
> +};
> +
> +struct qcom_battmgr_status {
> + unsigned int status;
> + unsigned int health;
> + unsigned int capacity;
> + unsigned int percent;
> + int current_now;
> + int power_now;
> + unsigned int voltage_now;
> + unsigned int voltage_ocv;
> + unsigned int temperature;
> +
> + unsigned int discharge_time;
> + unsigned int charge_time;
> +};
> +
> +struct qcom_battmgr_ac {
> + bool online;
> +};
> +
> +struct qcom_battmgr_usb {
> + bool online;
> + unsigned int voltage_now;
> + unsigned int voltage_max;
> + unsigned int current_now;
> + unsigned int current_max;
> + unsigned int current_limit;
> + unsigned int usb_type;
> +};
> +
> +struct qcom_battmgr_wireless {
> + bool online;
> + unsigned int voltage_now;
> + unsigned int voltage_max;
> + unsigned int current_now;
> + unsigned int current_max;
> +};
> +
> +struct qcom_battmgr {
> + struct device *dev;
> + struct pmic_glink_client *client;
> +
> + enum qcom_battmgr_variant variant;
> +
> + struct power_supply *ac_psy;
> + struct power_supply *bat_psy;
> + struct power_supply *usb_psy;
> + struct power_supply *wls_psy;
> +
> + enum qcom_battmgr_unit unit;
> +
> + int error;
> + struct completion ack;
> +
> + bool service_up;
> +
> + struct qcom_battmgr_info info;
> + struct qcom_battmgr_status status;
> + struct qcom_battmgr_ac ac;
> + struct qcom_battmgr_usb usb;
> + struct qcom_battmgr_wireless wireless;
> +
> + struct work_struct enable_work;
> +
> + /*
> + * @lock is used to prevent concurrent power supply requests to the
> + * firmware, as it then stops responding.
> + */
> + struct mutex lock;
> +};
> +
> +static int qcom_battmgr_request(struct qcom_battmgr *battmgr, void *data, size_t len)
> +{
> + unsigned long left;
> + int ret;
> +
> + reinit_completion(&battmgr->ack);
> +
> + battmgr->error = 0;
> +
> + ret = pmic_glink_send(battmgr->client, data, len);
> + if (ret < 0)
> + return ret;
> +
> + left = wait_for_completion_timeout(&battmgr->ack, HZ);
> + if (!left)
> + return -ETIMEDOUT;
> +
> + return battmgr->error;
> +}
> +
> +static int qcom_battmgr_request_property(struct qcom_battmgr *battmgr, int opcode,
> + int property, u32 value)
> +{
> + struct qcom_battmgr_property_request request = {
> + .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
> + .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
> + .hdr.opcode = cpu_to_le32(opcode),
> + .battery = cpu_to_le32(0),
> + .property = cpu_to_le32(property),
> + .value = cpu_to_le32(value),
> + };
> +
> + return qcom_battmgr_request(battmgr, &request, sizeof(request));
> +}
> +
> +static int qcom_battmgr_update_status(struct qcom_battmgr *battmgr)
> +{
> + struct qcom_battmgr_update_request request = {
> + .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
> + .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
> + .hdr.opcode = cpu_to_le32(BATTMGR_BAT_STATUS),
> + .battery_id = cpu_to_le32(0),
> + };
> +
> + return qcom_battmgr_request(battmgr, &request, sizeof(request));
> +}
> +
> +static int qcom_battmgr_update_info(struct qcom_battmgr *battmgr)
> +{
> + struct qcom_battmgr_update_request request = {
> + .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
> + .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
> + .hdr.opcode = cpu_to_le32(BATTMGR_BAT_INFO),
> + .battery_id = cpu_to_le32(0),
> + };
> +
> + return qcom_battmgr_request(battmgr, &request, sizeof(request));
> +}
> +
> +static int qcom_battmgr_update_charge_time(struct qcom_battmgr *battmgr)
> +{
> + struct qcom_battmgr_charge_time_request request = {
> + .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
> + .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
> + .hdr.opcode = cpu_to_le32(BATTMGR_BAT_CHARGE_TIME),
> + .battery_id = cpu_to_le32(0),
> + .percent = cpu_to_le32(100),
> + };
> +
> + return qcom_battmgr_request(battmgr, &request, sizeof(request));
> +}
> +
> +static int qcom_battmgr_update_discharge_time(struct qcom_battmgr *battmgr)
> +{
> + struct qcom_battmgr_discharge_time_request request = {
> + .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
> + .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
> + .hdr.opcode = cpu_to_le32(BATTMGR_BAT_DISCHARGE_TIME),
> + .battery_id = cpu_to_le32(0),
> + .rate = cpu_to_le32(0),
> + };
> +
> + return qcom_battmgr_request(battmgr, &request, sizeof(request));
> +}
> +
> +static const u8 sm8350_bat_prop_map[] = {
> + [POWER_SUPPLY_PROP_STATUS] = BATT_STATUS,
> + [POWER_SUPPLY_PROP_HEALTH] = BATT_HEALTH,
> + [POWER_SUPPLY_PROP_PRESENT] = BATT_PRESENT,
> + [POWER_SUPPLY_PROP_CHARGE_TYPE] = BATT_CHG_TYPE,
> + [POWER_SUPPLY_PROP_CAPACITY] = BATT_CAPACITY,
> + [POWER_SUPPLY_PROP_VOLTAGE_OCV] = BATT_VOLT_OCV,
> + [POWER_SUPPLY_PROP_VOLTAGE_NOW] = BATT_VOLT_NOW,
> + [POWER_SUPPLY_PROP_VOLTAGE_MAX] = BATT_VOLT_MAX,
> + [POWER_SUPPLY_PROP_CURRENT_NOW] = BATT_CURR_NOW,
> + [POWER_SUPPLY_PROP_TEMP] = BATT_TEMP,
> + [POWER_SUPPLY_PROP_TECHNOLOGY] = BATT_TECHNOLOGY,
> + [POWER_SUPPLY_PROP_CHARGE_COUNTER] = BATT_CHG_COUNTER,
> + [POWER_SUPPLY_PROP_CYCLE_COUNT] = BATT_CYCLE_COUNT,
> + [POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN] = BATT_CHG_FULL_DESIGN,
> + [POWER_SUPPLY_PROP_CHARGE_FULL] = BATT_CHG_FULL,
> + [POWER_SUPPLY_PROP_MODEL_NAME] = BATT_MODEL_NAME,
> + [POWER_SUPPLY_PROP_TIME_TO_FULL_AVG] = BATT_TTF_AVG,
> + [POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG] = BATT_TTE_AVG,
> + [POWER_SUPPLY_PROP_POWER_NOW] = BATT_POWER_NOW,
> +};
> +
> +static int qcom_battmgr_bat_sm8350_update(struct qcom_battmgr *battmgr,
> + enum power_supply_property psp)
> +{
> + unsigned int prop;
> + int ret;
> +
> + if (psp >= ARRAY_SIZE(sm8350_bat_prop_map))
> + return -EINVAL;
> +
> + prop = sm8350_bat_prop_map[psp];
> +
> + mutex_lock(&battmgr->lock);
> + ret = qcom_battmgr_request_property(battmgr, BATTMGR_BAT_PROPERTY_GET, prop, 0);
> + mutex_unlock(&battmgr->lock);
> +
> + return ret;
> +}
> +
> +static int qcom_battmgr_bat_sc8280xp_update(struct qcom_battmgr *battmgr,
> + enum power_supply_property psp)
> +{
> + int ret;
> +
> + mutex_lock(&battmgr->lock);
> +
> + if (!battmgr->info.valid) {
> + ret = qcom_battmgr_update_info(battmgr);
> + if (ret < 0)
> + goto out_unlock;
> + battmgr->info.valid = true;
> + }
> +
> + ret = qcom_battmgr_update_status(battmgr);
> + if (ret < 0)
> + goto out_unlock;
> +
> + if (psp == POWER_SUPPLY_PROP_TIME_TO_FULL_AVG) {
> + ret = qcom_battmgr_update_charge_time(battmgr);
> + if (ret < 0) {
> + ret = -ENODATA;
> + goto out_unlock;
> + }
> + }
> +
> + if (psp == POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG) {
> + ret = qcom_battmgr_update_discharge_time(battmgr);
> + if (ret < 0) {
> + ret = -ENODATA;
> + goto out_unlock;
> + }
> + }
> +
> +out_unlock:
> + mutex_unlock(&battmgr->lock);
> + return ret;
> +}
> +
> +static int qcom_battmgr_bat_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
> + enum qcom_battmgr_unit unit = battmgr->unit;
> + int ret;
> +
> + if (!battmgr->service_up)
> + return -ENODEV;
> +
> + if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
> + ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
> + else
> + ret = qcom_battmgr_bat_sm8350_update(battmgr, psp);
> + if (ret < 0)
> + return ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_STATUS:
> + val->intval = battmgr->status.status;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> + val->intval = battmgr->info.charge_type;
> + break;
> + case POWER_SUPPLY_PROP_HEALTH:
> + val->intval = battmgr->status.health;
> + break;
> + case POWER_SUPPLY_PROP_PRESENT:
> + val->intval = battmgr->info.present;
> + break;
> + case POWER_SUPPLY_PROP_TECHNOLOGY:
> + val->intval = battmgr->info.technology;
> + break;
> + case POWER_SUPPLY_PROP_CYCLE_COUNT:
> + val->intval = battmgr->info.cycle_count;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> + val->intval = battmgr->info.voltage_max_design;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX:
> + val->intval = battmgr->info.voltage_max;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + val->intval = battmgr->status.voltage_now;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_OCV:
> + val->intval = battmgr->status.voltage_ocv;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + val->intval = battmgr->status.current_now;
> + break;
> + case POWER_SUPPLY_PROP_POWER_NOW:
> + val->intval = battmgr->status.power_now;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> + if (unit != QCOM_BATTMGR_UNIT_mAh)
> + return -ENODATA;
> + val->intval = battmgr->info.design_capacity;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_FULL:
> + if (unit != QCOM_BATTMGR_UNIT_mAh)
> + return -ENODATA;
> + val->intval = battmgr->info.last_full_capacity;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_EMPTY:
> + if (unit != QCOM_BATTMGR_UNIT_mAh)
> + return -ENODATA;
> + val->intval = battmgr->info.capacity_low;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_NOW:
> + if (unit != QCOM_BATTMGR_UNIT_mAh)
> + return -ENODATA;
> + val->intval = battmgr->status.capacity;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_COUNTER:
> + val->intval = battmgr->info.charge_count;
> + break;
> + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
> + if (unit != QCOM_BATTMGR_UNIT_mWh)
> + return -ENODATA;
> + val->intval = battmgr->info.design_capacity;
> + break;
> + case POWER_SUPPLY_PROP_ENERGY_FULL:
> + if (unit != QCOM_BATTMGR_UNIT_mWh)
> + return -ENODATA;
> + val->intval = battmgr->info.last_full_capacity;
> + break;
> + case POWER_SUPPLY_PROP_ENERGY_EMPTY:
> + if (unit != QCOM_BATTMGR_UNIT_mWh)
> + return -ENODATA;
> + val->intval = battmgr->info.capacity_low;
> + break;
> + case POWER_SUPPLY_PROP_ENERGY_NOW:
> + if (unit != QCOM_BATTMGR_UNIT_mWh)
> + return -ENODATA;
> + val->intval = battmgr->status.capacity;
> + break;
> + case POWER_SUPPLY_PROP_CAPACITY:
> + val->intval = battmgr->status.percent;
> + break;
> + case POWER_SUPPLY_PROP_TEMP:
> + val->intval = battmgr->status.temperature;
> + break;
> + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
> + val->intval = battmgr->status.discharge_time;
> + break;
> + case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
> + val->intval = battmgr->status.charge_time;
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
> + val->intval = battmgr->info.year;
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
> + val->intval = battmgr->info.month;
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
> + val->intval = battmgr->info.day;
> + break;
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + val->strval = battmgr->info.model_number;
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURER:
> + val->strval = battmgr->info.oem_info;
> + break;
> + case POWER_SUPPLY_PROP_SERIAL_NUMBER:
> + val->strval = battmgr->info.serial_number;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const enum power_supply_property sc8280xp_bat_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_TECHNOLOGY,
> + POWER_SUPPLY_PROP_CYCLE_COUNT,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_POWER_NOW,
> + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> + POWER_SUPPLY_PROP_CHARGE_FULL,
> + POWER_SUPPLY_PROP_CHARGE_EMPTY,
> + POWER_SUPPLY_PROP_CHARGE_NOW,
> + POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
> + POWER_SUPPLY_PROP_ENERGY_FULL,
> + POWER_SUPPLY_PROP_ENERGY_EMPTY,
> + POWER_SUPPLY_PROP_ENERGY_NOW,
> + POWER_SUPPLY_PROP_TEMP,
> + POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
> + POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
> + POWER_SUPPLY_PROP_MANUFACTURE_DAY,
> + POWER_SUPPLY_PROP_MODEL_NAME,
> + POWER_SUPPLY_PROP_MANUFACTURER,
> + POWER_SUPPLY_PROP_SERIAL_NUMBER,
> +};
> +
> +static const struct power_supply_desc sc8280xp_bat_psy_desc = {
> + .name = "qcom-battmgr-bat",
> + .type = POWER_SUPPLY_TYPE_BATTERY,
> + .properties = sc8280xp_bat_props,
> + .num_properties = ARRAY_SIZE(sc8280xp_bat_props),
> + .get_property = qcom_battmgr_bat_get_property,
> +};
> +
> +static const enum power_supply_property sm8350_bat_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_CHARGE_TYPE,
> + POWER_SUPPLY_PROP_CAPACITY,
> + POWER_SUPPLY_PROP_VOLTAGE_OCV,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_TEMP,
> + POWER_SUPPLY_PROP_TECHNOLOGY,
> + POWER_SUPPLY_PROP_CHARGE_COUNTER,
> + POWER_SUPPLY_PROP_CYCLE_COUNT,
> + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> + POWER_SUPPLY_PROP_CHARGE_FULL,
> + POWER_SUPPLY_PROP_MODEL_NAME,
> + POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
> + POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
> + POWER_SUPPLY_PROP_POWER_NOW,
> +};
> +
> +static const struct power_supply_desc sm8350_bat_psy_desc = {
> + .name = "qcom-battmgr-bat",
> + .type = POWER_SUPPLY_TYPE_BATTERY,
> + .properties = sm8350_bat_props,
> + .num_properties = ARRAY_SIZE(sm8350_bat_props),
> + .get_property = qcom_battmgr_bat_get_property,
> +};
> +
> +static int qcom_battmgr_ac_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
> + int ret;
> +
> + if (!battmgr->service_up)
> + return -ENODEV;
> +
> + ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
> + if (ret)
> + return ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + val->intval = battmgr->ac.online;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const enum power_supply_property sc8280xp_ac_props[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> +};
> +
> +static const struct power_supply_desc sc8280xp_ac_psy_desc = {
> + .name = "qcom-battmgr-ac",
> + .type = POWER_SUPPLY_TYPE_MAINS,
> + .properties = sc8280xp_ac_props,
> + .num_properties = ARRAY_SIZE(sc8280xp_ac_props),
> + .get_property = qcom_battmgr_ac_get_property,
> +};
> +
> +static const u8 sm8350_usb_prop_map[] = {
> + [POWER_SUPPLY_PROP_ONLINE] = USB_ONLINE,
> + [POWER_SUPPLY_PROP_VOLTAGE_NOW] = USB_VOLT_NOW,
> + [POWER_SUPPLY_PROP_VOLTAGE_MAX] = USB_VOLT_MAX,
> + [POWER_SUPPLY_PROP_CURRENT_NOW] = USB_CURR_NOW,
> + [POWER_SUPPLY_PROP_CURRENT_MAX] = USB_CURR_MAX,
> + [POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT] = USB_INPUT_CURR_LIMIT,
> + [POWER_SUPPLY_PROP_USB_TYPE] = USB_TYPE,
> +};
> +
> +static int qcom_battmgr_usb_sm8350_update(struct qcom_battmgr *battmgr,
> + enum power_supply_property psp)
> +{
> + unsigned int prop;
> + int ret;
> +
> + if (psp >= ARRAY_SIZE(sm8350_usb_prop_map))
> + return -EINVAL;
> +
> + prop = sm8350_usb_prop_map[psp];
> +
> + mutex_lock(&battmgr->lock);
> + ret = qcom_battmgr_request_property(battmgr, BATTMGR_USB_PROPERTY_GET, prop, 0);
> + mutex_unlock(&battmgr->lock);
> +
> + return ret;
> +}
> +
> +static int qcom_battmgr_usb_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
> + int ret;
> +
> + if (!battmgr->service_up)
> + return -ENODEV;
> +
> + if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
> + ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
> + else
> + ret = qcom_battmgr_usb_sm8350_update(battmgr, psp);
> + if (ret)
> + return ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + val->intval = battmgr->usb.online;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + val->intval = battmgr->usb.voltage_now;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX:
> + val->intval = battmgr->usb.voltage_max;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + val->intval = battmgr->usb.current_now;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_MAX:
> + val->intval = battmgr->usb.current_max;
> + break;
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + val->intval = battmgr->usb.current_limit;
> + break;
> + case POWER_SUPPLY_PROP_USB_TYPE:
> + val->intval = battmgr->usb.usb_type;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const enum power_supply_usb_type usb_psy_supported_types[] = {
> + POWER_SUPPLY_USB_TYPE_UNKNOWN,
> + POWER_SUPPLY_USB_TYPE_SDP,
> + POWER_SUPPLY_USB_TYPE_DCP,
> + POWER_SUPPLY_USB_TYPE_CDP,
> + POWER_SUPPLY_USB_TYPE_ACA,
> + POWER_SUPPLY_USB_TYPE_C,
> + POWER_SUPPLY_USB_TYPE_PD,
> + POWER_SUPPLY_USB_TYPE_PD_DRP,
> + POWER_SUPPLY_USB_TYPE_PD_PPS,
> + POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID,
> +};
> +
> +static const enum power_supply_property sc8280xp_usb_props[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> +};
> +
> +static const struct power_supply_desc sc8280xp_usb_psy_desc = {
> + .name = "qcom-battmgr-usb",
> + .type = POWER_SUPPLY_TYPE_USB,
> + .properties = sc8280xp_usb_props,
> + .num_properties = ARRAY_SIZE(sc8280xp_usb_props),
> + .get_property = qcom_battmgr_usb_get_property,
> + .usb_types = usb_psy_supported_types,
> + .num_usb_types = ARRAY_SIZE(usb_psy_supported_types),
> +};
> +
> +static const enum power_supply_property sm8350_usb_props[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_CURRENT_MAX,
> + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> + POWER_SUPPLY_PROP_USB_TYPE,
> +};
> +
> +static const struct power_supply_desc sm8350_usb_psy_desc = {
> + .name = "qcom-battmgr-usb",
> + .type = POWER_SUPPLY_TYPE_USB,
> + .properties = sm8350_usb_props,
> + .num_properties = ARRAY_SIZE(sm8350_usb_props),
> + .get_property = qcom_battmgr_usb_get_property,
> + .usb_types = usb_psy_supported_types,
> + .num_usb_types = ARRAY_SIZE(usb_psy_supported_types),
> +};
> +
> +static const u8 sm8350_wls_prop_map[] = {
> + [POWER_SUPPLY_PROP_ONLINE] = WLS_ONLINE,
> + [POWER_SUPPLY_PROP_VOLTAGE_NOW] = WLS_VOLT_NOW,
> + [POWER_SUPPLY_PROP_VOLTAGE_MAX] = WLS_VOLT_MAX,
> + [POWER_SUPPLY_PROP_CURRENT_NOW] = WLS_CURR_NOW,
> + [POWER_SUPPLY_PROP_CURRENT_MAX] = WLS_CURR_MAX,
> +};
> +
> +static int qcom_battmgr_wls_sm8350_update(struct qcom_battmgr *battmgr,
> + enum power_supply_property psp)
> +{
> + unsigned int prop;
> + int ret;
> +
> + if (psp >= ARRAY_SIZE(sm8350_wls_prop_map))
> + return -EINVAL;
> +
> + prop = sm8350_wls_prop_map[psp];
> +
> + mutex_lock(&battmgr->lock);
> + ret = qcom_battmgr_request_property(battmgr, BATTMGR_WLS_PROPERTY_GET, prop, 0);
> + mutex_unlock(&battmgr->lock);
> +
> + return ret;
> +}
> +
> +static int qcom_battmgr_wls_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
> + int ret;
> +
> + if (!battmgr->service_up)
> + return -ENODEV;
> +
> + if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
> + ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
> + else
> + ret = qcom_battmgr_wls_sm8350_update(battmgr, psp);
> + if (ret < 0)
> + return ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + val->intval = battmgr->wireless.online;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + val->intval = battmgr->wireless.voltage_now;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX:
> + val->intval = battmgr->wireless.voltage_max;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + val->intval = battmgr->wireless.current_now;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_MAX:
> + val->intval = battmgr->wireless.current_max;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const enum power_supply_property sc8280xp_wls_props[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> +};
> +
> +static const struct power_supply_desc sc8280xp_wls_psy_desc = {
> + .name = "qcom-battmgr-wls",
> + .type = POWER_SUPPLY_TYPE_WIRELESS,
> + .properties = sc8280xp_wls_props,
> + .num_properties = ARRAY_SIZE(sc8280xp_wls_props),
> + .get_property = qcom_battmgr_wls_get_property,
> +};
> +
> +static const enum power_supply_property sm8350_wls_props[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_CURRENT_MAX,
> +};
> +
> +static const struct power_supply_desc sm8350_wls_psy_desc = {
> + .name = "qcom-battmgr-wls",
> + .type = POWER_SUPPLY_TYPE_WIRELESS,
> + .properties = sm8350_wls_props,
> + .num_properties = ARRAY_SIZE(sm8350_wls_props),
> + .get_property = qcom_battmgr_wls_get_property,
> +};
> +
> +static void qcom_battmgr_notification(struct qcom_battmgr *battmgr,
> + const struct qcom_battmgr_message *msg,
> + int len)
> +{
> + size_t payload_len = len - sizeof(struct pmic_glink_hdr);
> + unsigned int notification;
> +
> + if (payload_len != sizeof(msg->notification)) {
> + dev_warn(battmgr->dev, "ignoring notification with invalid length\n");
> + return;
> + }
> +
> + notification = le32_to_cpu(msg->notification);
> + switch (notification) {
> + case NOTIF_BAT_INFO:
> + battmgr->info.valid = false;
> + fallthrough;
> + case NOTIF_BAT_STATUS:
> + case NOTIF_BAT_PROPERTY:
> + power_supply_changed(battmgr->bat_psy);
> + break;
> + case NOTIF_USB_PROPERTY:
> + power_supply_changed(battmgr->usb_psy);
> + break;
> + case NOTIF_WLS_PROPERTY:
> + power_supply_changed(battmgr->wls_psy);
> + break;
> + default:
> + dev_err(battmgr->dev, "unknown notification: %#x\n", notification);
> + break;
> + }
> +}
> +
> +static void qcom_battmgr_sc8280xp_strcpy(char *dest, const char *src)
> +{
> + size_t len = src[0];
> +
> + /* Some firmware versions return Pascal-style strings */
> + if (len < BATTMGR_STRING_LEN && len == strnlen(src + 1, BATTMGR_STRING_LEN - 1)) {
> + memcpy(dest, src + 1, len);
> + dest[len] = '\0';
> + } else {
> + memcpy(dest, src, BATTMGR_STRING_LEN);
> + }
> +}
> +
> +static unsigned int qcom_battmgr_sc8280xp_parse_technology(const char *chemistry)
> +{
> + if (!strncmp(chemistry, "LIO", BATTMGR_CHEMISTRY_LEN))
> + return POWER_SUPPLY_TECHNOLOGY_LION;
> +
> + pr_err("Unknown battery technology '%s'\n", chemistry);
> + return POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
> +}
> +
> +static unsigned int qcom_battmgr_sc8280xp_convert_temp(unsigned int temperature)
> +{
> + return DIV_ROUND_CLOSEST(temperature, 10);
> +}
> +
> +static void qcom_battmgr_sc8280xp_callback(struct qcom_battmgr *battmgr,
> + const struct qcom_battmgr_message *resp,
> + size_t len)
> +{
> + unsigned int opcode = le32_to_cpu(resp->hdr.opcode);
> + unsigned int source;
> + unsigned int state;
> + size_t payload_len = len - sizeof(struct pmic_glink_hdr);
> +
> + if (payload_len < sizeof(__le32)) {
> + dev_warn(battmgr->dev, "invalid payload length for %#x: %zd\n",
> + opcode, len);
> + return;
> + }
> +
> + switch (opcode) {
> + case BATTMGR_REQUEST_NOTIFICATION:
> + battmgr->error = 0;
> + break;
> + case BATTMGR_BAT_INFO:
> + if (payload_len != sizeof(resp->info)) {
> + dev_warn(battmgr->dev,
> + "invalid payload length for battery information request: %zd\n",
> + payload_len);
> + battmgr->error = -ENODATA;
> + return;
> + }
> +
> + battmgr->unit = le32_to_cpu(resp->info.power_unit);
> +
> + battmgr->info.present = true;
> + battmgr->info.design_capacity = le32_to_cpu(resp->info.design_capacity) * 1000;
> + battmgr->info.last_full_capacity = le32_to_cpu(resp->info.last_full_capacity) * 1000;
> + battmgr->info.voltage_max_design = le32_to_cpu(resp->info.design_voltage) * 1000;
> + battmgr->info.capacity_low = le32_to_cpu(resp->info.capacity_low) * 1000;
> + battmgr->info.cycle_count = le32_to_cpu(resp->info.cycle_count);
> + qcom_battmgr_sc8280xp_strcpy(battmgr->info.model_number, resp->info.model_number);
> + qcom_battmgr_sc8280xp_strcpy(battmgr->info.serial_number, resp->info.serial_number);
> + battmgr->info.technology = qcom_battmgr_sc8280xp_parse_technology(resp->info.battery_chemistry);
> + qcom_battmgr_sc8280xp_strcpy(battmgr->info.oem_info, resp->info.oem_info);
> + battmgr->info.day = resp->info.day;
> + battmgr->info.month = resp->info.month;
> + battmgr->info.year = le16_to_cpu(resp->info.year);
> + break;
> + case BATTMGR_BAT_STATUS:
> + if (payload_len != sizeof(resp->status)) {
> + dev_warn(battmgr->dev,
> + "invalid payload length for battery status request: %zd\n",
> + payload_len);
> + battmgr->error = -ENODATA;
> + return;
> + }
> +
> + state = le32_to_cpu(resp->status.battery_state);
> + if (state & BIT(0))
> + battmgr->status.status = POWER_SUPPLY_STATUS_DISCHARGING;
> + else if (state & BIT(1))
> + battmgr->status.status = POWER_SUPPLY_STATUS_CHARGING;
> + else
> + battmgr->status.status = POWER_SUPPLY_STATUS_NOT_CHARGING;
> +
> + battmgr->status.capacity = le32_to_cpu(resp->status.capacity) * 1000;
> + battmgr->status.power_now = le32_to_cpu(resp->status.rate) * 1000;
> + battmgr->status.voltage_now = le32_to_cpu(resp->status.battery_voltage) * 1000;
> + battmgr->status.temperature = qcom_battmgr_sc8280xp_convert_temp(le32_to_cpu(resp->status.temperature));
> +
> + source = le32_to_cpu(resp->status.charging_source);
> + battmgr->ac.online = source == BATTMGR_CHARGING_SOURCE_AC;
> + battmgr->usb.online = source == BATTMGR_CHARGING_SOURCE_USB;
> + battmgr->wireless.online = source == BATTMGR_CHARGING_SOURCE_WIRELESS;
> + break;
> + case BATTMGR_BAT_DISCHARGE_TIME:
> + battmgr->status.discharge_time = le32_to_cpu(resp->time);
> + break;
> + case BATTMGR_BAT_CHARGE_TIME:
> + battmgr->status.charge_time = le32_to_cpu(resp->time);
> + break;
> + default:
> + dev_warn(battmgr->dev, "unknown message %#x\n", opcode);
> + break;
> + }
> +
> + complete(&battmgr->ack);
> +}
> +
> +static void qcom_battmgr_sm8350_callback(struct qcom_battmgr *battmgr,
> + const struct qcom_battmgr_message *resp,
> + size_t len)
> +{
> + unsigned int property;
> + unsigned int opcode = le32_to_cpu(resp->hdr.opcode);
> + size_t payload_len = len - sizeof(struct pmic_glink_hdr);
> + unsigned int val;
> +
> + if (payload_len < sizeof(__le32)) {
> + dev_warn(battmgr->dev, "invalid payload length for %#x: %zd\n",
> + opcode, len);
> + return;
> + }
> +
> + switch (opcode) {
> + case BATTMGR_BAT_PROPERTY_GET:
> + property = le32_to_cpu(resp->intval.property);
> + if (property == BATT_MODEL_NAME) {
> + if (payload_len != sizeof(resp->strval)) {
> + dev_warn(battmgr->dev,
> + "invalid payload length for BATT_MODEL_NAME request: %zd\n",
> + payload_len);
> + battmgr->error = -ENODATA;
> + return;
> + }
> + } else {
> + if (payload_len != sizeof(resp->intval)) {
> + dev_warn(battmgr->dev,
> + "invalid payload length for %#x request: %zd\n",
> + property, payload_len);
> + battmgr->error = -ENODATA;
> + return;
> + }
> +
> + battmgr->error = le32_to_cpu(resp->intval.result);
> + if (battmgr->error)
> + goto out_complete;
> + }
> +
> + switch (property) {
> + case BATT_STATUS:
> + battmgr->status.status = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_HEALTH:
> + battmgr->status.health = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_PRESENT:
> + battmgr->info.present = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_CHG_TYPE:
> + battmgr->info.charge_type = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_CAPACITY:
> + battmgr->status.percent = le32_to_cpu(resp->intval.value);
> + do_div(battmgr->status.percent, 100);
> + break;
> + case BATT_VOLT_OCV:
> + battmgr->status.voltage_ocv = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_VOLT_NOW:
> + battmgr->status.voltage_now = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_VOLT_MAX:
> + battmgr->info.voltage_max = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_CURR_NOW:
> + battmgr->status.current_now = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_TEMP:
> + val = le32_to_cpu(resp->intval.value);
> + battmgr->status.temperature = DIV_ROUND_CLOSEST(val, 10);
> + break;
> + case BATT_TECHNOLOGY:
> + battmgr->info.technology = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_CHG_COUNTER:
> + battmgr->info.charge_count = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_CYCLE_COUNT:
> + battmgr->info.cycle_count = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_CHG_FULL_DESIGN:
> + battmgr->info.design_capacity = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_CHG_FULL:
> + battmgr->info.last_full_capacity = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_MODEL_NAME:
> + strscpy(battmgr->info.model_number, resp->strval.model, BATTMGR_STRING_LEN);
> + break;
> + case BATT_TTF_AVG:
> + battmgr->status.charge_time = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_TTE_AVG:
> + battmgr->status.discharge_time = le32_to_cpu(resp->intval.value);
> + break;
> + case BATT_POWER_NOW:
> + battmgr->status.power_now = le32_to_cpu(resp->intval.value);
> + break;
> + default:
> + dev_warn(battmgr->dev, "unknown property %#x\n", property);
> + break;
> + }
> + break;
> + case BATTMGR_USB_PROPERTY_GET:
> + property = le32_to_cpu(resp->intval.property);
> + if (payload_len != sizeof(resp->intval)) {
> + dev_warn(battmgr->dev,
> + "invalid payload length for %#x request: %zd\n",
> + property, payload_len);
> + battmgr->error = -ENODATA;
> + return;
> + }
> +
> + battmgr->error = le32_to_cpu(resp->intval.result);
> + if (battmgr->error)
> + goto out_complete;
> +
> + switch (property) {
> + case USB_ONLINE:
> + battmgr->usb.online = le32_to_cpu(resp->intval.value);
> + break;
> + case USB_VOLT_NOW:
> + battmgr->usb.voltage_now = le32_to_cpu(resp->intval.value);
> + break;
> + case USB_VOLT_MAX:
> + battmgr->usb.voltage_max = le32_to_cpu(resp->intval.value);
> + break;
> + case USB_CURR_NOW:
> + battmgr->usb.current_now = le32_to_cpu(resp->intval.value);
> + break;
> + case USB_CURR_MAX:
> + battmgr->usb.current_max = le32_to_cpu(resp->intval.value);
> + break;
> + case USB_INPUT_CURR_LIMIT:
> + battmgr->usb.current_limit = le32_to_cpu(resp->intval.value);
> + break;
> + case USB_TYPE:
> + battmgr->usb.usb_type = le32_to_cpu(resp->intval.value);
> + break;
> + default:
> + dev_warn(battmgr->dev, "unknown property %#x\n", property);
> + break;
> + }
> + break;
> + case BATTMGR_WLS_PROPERTY_GET:
> + property = le32_to_cpu(resp->intval.property);
> + if (payload_len != sizeof(resp->intval)) {
> + dev_warn(battmgr->dev,
> + "invalid payload length for %#x request: %zd\n",
> + property, payload_len);
> + battmgr->error = -ENODATA;
> + return;
> + }
> +
> + battmgr->error = le32_to_cpu(resp->intval.result);
> + if (battmgr->error)
> + goto out_complete;
> +
> + switch (property) {
> + case WLS_ONLINE:
> + battmgr->wireless.online = le32_to_cpu(resp->intval.value);
> + break;
> + case WLS_VOLT_NOW:
> + battmgr->wireless.voltage_now = le32_to_cpu(resp->intval.value);
> + break;
> + case WLS_VOLT_MAX:
> + battmgr->wireless.voltage_max = le32_to_cpu(resp->intval.value);
> + break;
> + case WLS_CURR_NOW:
> + battmgr->wireless.current_now = le32_to_cpu(resp->intval.value);
> + break;
> + case WLS_CURR_MAX:
> + battmgr->wireless.current_max = le32_to_cpu(resp->intval.value);
> + break;
> + default:
> + dev_warn(battmgr->dev, "unknown property %#x\n", property);
> + break;
> + }
> + break;
> + case BATTMGR_REQUEST_NOTIFICATION:
> + battmgr->error = 0;
> + break;
> + default:
> + dev_warn(battmgr->dev, "unknown message %#x\n", opcode);
> + break;
> + }
> +
> +out_complete:
> + complete(&battmgr->ack);
> +}
> +
> +static void qcom_battmgr_callback(const void *data, size_t len, void *priv)
> +{
> + const struct pmic_glink_hdr *hdr = data;
> + struct qcom_battmgr *battmgr = priv;
> + unsigned int opcode = le32_to_cpu(hdr->opcode);
> +
> + if (opcode == BATTMGR_NOTIFICATION)
> + qcom_battmgr_notification(battmgr, data, len);
> + else if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
> + qcom_battmgr_sc8280xp_callback(battmgr, data, len);
> + else
> + qcom_battmgr_sm8350_callback(battmgr, data, len);
> +}
> +
> +static void qcom_battmgr_enable_worker(struct work_struct *work)
> +{
> + struct qcom_battmgr *battmgr = container_of(work, struct qcom_battmgr, enable_work);
> + struct qcom_battmgr_enable_request req = {
> + .hdr.owner = PMIC_GLINK_OWNER_BATTMGR,
> + .hdr.type = PMIC_GLINK_NOTIFY,
> + .hdr.opcode = BATTMGR_REQUEST_NOTIFICATION,
> + };
> + int ret;
> +
> + ret = qcom_battmgr_request(battmgr, &req, sizeof(req));
> + if (ret)
> + dev_err(battmgr->dev, "failed to request power notifications\n");
> +}
> +
> +static void qcom_battmgr_pdr_notify(void *priv, int state)
> +{
> + struct qcom_battmgr *battmgr = priv;
> +
> + if (state == SERVREG_SERVICE_STATE_UP) {
> + battmgr->service_up = true;
> + schedule_work(&battmgr->enable_work);
> + } else {
> + battmgr->service_up = false;
> + }
> +}
> +
> +static const struct of_device_id qcom_battmgr_of_variants[] = {
> + { .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP },
> + { .compatible = "qcom,sc8280xp-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP },
> + /* Unmatched devices falls back to QCOM_BATTMGR_SM8350 */
> + {}
> +};
> +
> +static char *qcom_battmgr_battery[] = { "battery" };
> +
> +static int qcom_battmgr_probe(struct auxiliary_device *adev,
> + const struct auxiliary_device_id *id)
> +{
> + struct power_supply_config psy_cfg_supply = {};
> + struct power_supply_config psy_cfg = {};
> + const struct of_device_id *match;
> + struct qcom_battmgr *battmgr;
> + struct device *dev = &adev->dev;
> +
> + battmgr = devm_kzalloc(dev, sizeof(*battmgr), GFP_KERNEL);
> + if (!battmgr)
> + return -ENOMEM;
> +
> + battmgr->dev = dev;
> +
> + psy_cfg.drv_data = battmgr;
> + psy_cfg.of_node = adev->dev.of_node;
> +
> + psy_cfg_supply.drv_data = battmgr;
> + psy_cfg_supply.of_node = adev->dev.of_node;
> + psy_cfg_supply.supplied_to = qcom_battmgr_battery;
> + psy_cfg_supply.num_supplicants = 1;
> +
> + INIT_WORK(&battmgr->enable_work, qcom_battmgr_enable_worker);
> + mutex_init(&battmgr->lock);
> + init_completion(&battmgr->ack);
> +
> + match = of_match_device(qcom_battmgr_of_variants, dev->parent);
> + if (match)
> + battmgr->variant = (unsigned long)match->data;
> + else
> + battmgr->variant = QCOM_BATTMGR_SM8350;
> +
> + if (battmgr->variant == QCOM_BATTMGR_SC8280XP) {
> + battmgr->bat_psy = devm_power_supply_register(dev, &sc8280xp_bat_psy_desc, &psy_cfg);
> + if (IS_ERR(battmgr->bat_psy))
> + return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
> + "failed to register battery power supply\n");
> +
> + battmgr->ac_psy = devm_power_supply_register(dev, &sc8280xp_ac_psy_desc, &psy_cfg_supply);
> + if (IS_ERR(battmgr->ac_psy))
> + return dev_err_probe(dev, PTR_ERR(battmgr->ac_psy),
> + "failed to register AC power supply\n");
> +
> + battmgr->usb_psy = devm_power_supply_register(dev, &sc8280xp_usb_psy_desc, &psy_cfg_supply);
> + if (IS_ERR(battmgr->usb_psy))
> + return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy),
> + "failed to register USB power supply\n");
> +
> + battmgr->wls_psy = devm_power_supply_register(dev, &sc8280xp_wls_psy_desc, &psy_cfg_supply);
> + if (IS_ERR(battmgr->wls_psy))
> + return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy),
> + "failed to register wireless charing power supply\n");
> + } else {
> + battmgr->bat_psy = devm_power_supply_register(dev, &sm8350_bat_psy_desc, &psy_cfg);
> + if (IS_ERR(battmgr->bat_psy))
> + return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
> + "failed to register battery power supply\n");
> +
> + battmgr->usb_psy = devm_power_supply_register(dev, &sm8350_usb_psy_desc, &psy_cfg_supply);
> + if (IS_ERR(battmgr->usb_psy))
> + return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy),
> + "failed to register USB power supply\n");
> +
> + battmgr->wls_psy = devm_power_supply_register(dev, &sm8350_wls_psy_desc, &psy_cfg_supply);
> + if (IS_ERR(battmgr->wls_psy))
> + return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy),
> + "failed to register wireless charing power supply\n");
> + }
> +
> + battmgr->client = devm_pmic_glink_register_client(dev,
> + PMIC_GLINK_OWNER_BATTMGR,
> + qcom_battmgr_callback,
> + qcom_battmgr_pdr_notify,
> + battmgr);
> + return PTR_ERR_OR_ZERO(battmgr->client);
> +}
> +
> +static const struct auxiliary_device_id qcom_battmgr_id_table[] = {
> + { .name = "pmic_glink.power-supply", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(auxiliary, qcom_battmgr_id_table);
> +
> +static struct auxiliary_driver qcom_battmgr_driver = {
> + .name = "pmic_glink_power_supply",
> + .probe = qcom_battmgr_probe,
> + .id_table = qcom_battmgr_id_table,
> +};
> +
> +module_auxiliary_driver(qcom_battmgr_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm PMIC GLINK battery manager driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists