| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 13 Feb 2023 12:25:57 +1030
From: "Andrew Jeffery" <andrew@...id.au>
To: "Jordan Chang" <jordan.chang@...space.com>,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
"Joel Stanley" <joel@....id.au>, "Rob Herring" <robh+dt@...nel.org>
Cc: jay.tc.lin@...space.com, eason.ys.huang@...space.com
Subject: Re: [PATCH v4 1/1] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC
On Fri, 10 Feb 2023, at 21:08, Jordan Chang wrote:
> Add initial version of device tree for Ufispace NCPLite platform
> which is equipped with AST2600-based BMC.
>
> Signed-off-by: Jordan Chang <jordan.chang@...space.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/aspeed-bmc-ufispace-ncplite.dts | 359 ++++++++++++++++++
> 2 files changed, 360 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 2ee9c043218b..d26e0651e805 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1626,6 +1626,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-inventec-transformers.dtb \
> aspeed-bmc-tyan-s7106.dtb \
> aspeed-bmc-tyan-s8036.dtb \
> + aspeed-bmc-ufispace-ncplite.dtb \
> aspeed-bmc-vegman-n110.dtb \
> aspeed-bmc-vegman-rx20.dtb \
> aspeed-bmc-vegman-sx20.dtb
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
> b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
> new file mode 100644
> index 000000000000..a3853bdcae9d
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
> @@ -0,0 +1,359 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright (c) 2022 Ufispace Co., Ltd.
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "Ufispace NCPLite BMC";
> + compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
> +
> + aliases {
> + serial4 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + };
> +
> + memory@...00000 {
> + device_type = "memory";
> + reg = <0x80000000 0x80000000>;
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
> + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
> + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
> + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + event-fan-alert {
> + label = "fan-alert";
> + gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(M, 2)>;
> + };
> +
> + event-allpwr-good {
> + label = "allpwr-good";
> + gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(V, 4)>;
> + };
> +
> + event-psu0-alert {
> + label = "psu0-alert";
> + gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(V, 1)>;
> + };
> +
> + event-psu1-alert {
> + label = "psu1-alert";
> + gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(V, 2)>;
> + };
> +
> + event-thermal-alert {
> + label = "thermal-alert";
> + gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(P, 2)>;
> + };
> +
> + event-cpu-caterr {
> + label = "cpu-caterr";
> + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(N, 3)>;
> + };
> +
> + event-cpu-thermtrip {
> + label = "cpu-thermtrip";
> + gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(V, 5)>;
> + };
> +
> + event-psu0-presence {
> + label = "psu0-presence";
> + gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 6)>;
> + };
> +
> + event-psu1-presence {
> + label = "psu1-presence";
> + gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 7)>;
> + };
> +
> + event-psu0-power-ok {
> + label = "psu0-power-ok";
> + gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(M, 4)>;
> + };
> +
> + event-psu1-power-ok {
> + label = "psu1-power-ok";
> + gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(M, 5)>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <1000>;
> +
> + event-fan0-presence {
> + label = "fan0-presence";
> + gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
> + linux,code = <2>;
> + };
> +
> + event-fan1-presence {
> + label = "fan1-presence";
> + gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
> + linux,code = <6>;
> + };
> +
> + event-fan2-presence {
> + label = "fan2-presence";
> + gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
> + linux,code = <10>;
> + };
> +
> + event-fan3-presence {
> + label = "fan3-presence";
> + gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
> + linux,code = <14>;
> + };
> + };
> +};
> +
> +&mac2 {
> + status = "okay";
> + use-ncsi;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii3_default>;
> + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
> + <&syscon ASPEED_CLK_MAC3RCLK>;
> + clock-names = "MACCLK", "RCLK";
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64.dtsi"
> + };
> +
> + flash@1 {
> + status = "okay";
> + m25p,fast-read;
> + label = "alt-bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64-alt.dtsi"
> + };
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&kcs3 {
> + status = "okay";
> + aspeed,lpc-io-reg = <0xca2>;
> +};
> +
> +&lpc_reset {
> + status = "okay";
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> +};
> +
> +&uart_routing {
> + status = "okay";
> +};
> +
> +&wdt1 {
> + status = "okay";
> +};
> +
> +&wdt2 {
> + status = "okay";
> +};
> +
> +&peci0 {
> + status = "okay";
> +};
> +
> +&udc {
> + status = "okay";
> +};
> +
> +&adc0 {
> + vref = <2500>;
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> + &pinctrl_adc2_default &pinctrl_adc3_default
> + &pinctrl_adc4_default &pinctrl_adc5_default
> + &pinctrl_adc6_default &pinctrl_adc7_default>;
> +};
> +
> +&adc1 {
> + vref = <2500>;
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
> + &pinctrl_adc10_default &pinctrl_adc11_default
> + &pinctrl_adc12_default &pinctrl_adc13_default
> + &pinctrl_adc14_default &pinctrl_adc15_default>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + temperature-sensor@48 {
> + compatible = "national,lm75";
> + reg = <0x48>;
> + };
> +
> + temperature-sensor@49 {
> + compatible = "national,lm75";
> + reg = <0x49>;
> + };
> +
> + temperature-sensor@4c {
> + compatible = "national,lm86";
> + reg = <0x4c>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + temperature-sensor@4f {
> + cpmpatible = "national,lm75";
s/cpmp/comp/
Otherwise:
Reviewed-by: Andrew Jeffery <andrew@...id.au>
Powered by blists - more mailing lists