[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <CQHIJJ1Z0E52.2QKE1LOH0D497@otso>
Date: Mon, 13 Feb 2023 15:43:15 +0100
From: "Luca Weiss" <luca.weiss@...rphone.com>
To: "Konrad Dybcio" <konrad.dybcio@...aro.org>,
"Andy Gross" <agross@...nel.org>,
"Bjorn Andersson" <andersson@...nel.org>,
"Rob Herring" <robh+dt@...nel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>
Cc: <~postmarketos/upstreaming@...ts.sr.ht>,
<phone-devel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] arm64: dts: qcom: sm7225-fairphone-fp4: enable
remaining i2c busses
On Mon Feb 13, 2023 at 3:40 PM CET, Konrad Dybcio wrote:
>
>
> On 13.02.2023 14:26, Luca Weiss wrote:
> > Enable all i2c busses where something is connected on this phone. Add
> > comments as placeholders for which components are still missing.
> >
> > Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
> > ---
> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>
> Any reason you've not enabled GPI DMA yet?
Good call, I enabled it in a different commit that isn't meant for
upstream, thought it was already enabled in mainline.
Will send a v2 with this added:
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
>
> Konrad
> > arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 25 +++++++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> > index 86114dd2c0c4..d0f08b42592f 100644
> > --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> > @@ -359,10 +359,31 @@ &cdsp {
> > status = "okay";
> > };
> >
> > +&i2c0 {
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +
> > + /* ST21NFCD NFC @ 8 */
> > + /* VL53L3 ToF @ 29 */
> > + /* AW88264A amplifier @ 34 */
> > + /* AW88264A amplifier @ 35 */
> > +};
> > +
> > +&i2c8 {
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +
> > + /* HX83112A touchscreen @ 48 */
> > +};
> > +
> > &i2c10 {
> > clock-frequency = <400000>;
> > status = "okay";
> >
> > + /* PM8008 PMIC @ 8 and 9 */
> > + /* PX8618 @ 26 */
> > + /* SMB1395 PMIC @ 34 */
> > +
> > haptics@5a {
> > compatible = "awinic,aw8695";
> > reg = <0x5a>;
> > @@ -495,6 +516,10 @@ adc-chan@644 {
> > };
> > };
> >
> > +&qupv3_id_0 {
> > + status = "okay";
> > +};
> > +
> > &qupv3_id_1 {
> > status = "okay";
> > };
> >
Powered by blists - more mailing lists