[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230214230010.20318-7-linux@zary.sk>
Date: Tue, 14 Feb 2023 23:59:58 +0100
From: Ondrej Zary <linux@...y.sk>
To: Damien Le Moal <damien.lemoal@...nsource.wdc.com>
Cc: Christoph Hellwig <hch@....de>,
Sergey Shtylyov <s.shtylyov@....ru>,
Jens Axboe <axboe@...nel.dk>, Tim Waugh <tim@...erelk.net>,
linux-block@...r.kernel.org, linux-parport@...ts.infradead.org,
linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 06/18] pata_parport: remove devtype from struct pi_adapter
Only bpck driver uses devtype but it never gets set in pata_parport.
Remove it.
As most bpck devices are CD-ROMs, always run the code that depends
on devtype == PI_PCD.
Signed-off-by: Ondrej Zary <linux@...y.sk>
---
drivers/ata/pata_parport/bpck.c | 4 ++--
include/linux/pata_parport.h | 3 ---
2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index b9174cf8863c..96386a10c22f 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -241,14 +241,14 @@ static void bpck_connect ( PIA *pi )
WR(5,8);
- if (pi->devtype == PI_PCD) {
+/* if (pi->devtype == PI_PCD) { possibly wrong, purpose unknown */
WR(0x46,0x10); /* fiddle with ESS logic ??? */
WR(0x4c,0x38);
WR(0x4d,0x88);
WR(0x46,0xa0);
WR(0x41,0);
WR(0x4e,8);
- }
+/* }*/
}
static void bpck_disconnect ( PIA *pi )
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index 9614ce53470a..3fc6b002c7c8 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -11,15 +11,12 @@
#include <linux/libata.h>
-#define PI_PCD 1 /* dummy for paride protocol modules */
-
struct pi_adapter {
struct device dev;
struct pi_protocol *proto; /* adapter protocol */
int port; /* base address of parallel port */
int mode; /* transfer mode in use */
int delay; /* adapter delay setting */
- int devtype; /* dummy for paride protocol modules */
char *device; /* dummy for paride protocol modules */
int unit; /* unit number for chained adapters */
int saved_r0; /* saved port state */
--
Ondrej Zary
Powered by blists - more mailing lists